Soil quality - Guidance on the determination of background values (ISO 19258:2005)

ISO 19258:2005 provides guidance on the principles and main methods for the determination of pedo-geochemical background values and background values for inorganic and organic substances in soils. ISO 19258:2005 gives guidance on strategies for sampling and data processing and identifies methods for sampling and analysis. ISO 19258:2005 does not give guidance on the determination of background values for groundwater and sediments.

Bodenbeschaffenheit - Leitfaden zur Bestimmung von Hintergrundwerten (ISO 19258:2005)

Diese Internationale Norm enthält einen Leitfaden für die Grundsätze und wesentlichen Vorgehensweisen bei der Ermittlung von pedo-geochemischen Hintergrundwerten sowie von Hintergrundwerten von anorganischen und organischen Stoffen in Böden.
Diese Internationale Norm gibt Anleitungen zu Probenahmestrategien und für die Datenverarbeitung und legt Verfahren für die Probenahme und die Untersuchung fest.
Diese Internationale Norm gibt keine Anleitung für die Ermittlung der Hintergrundwerte für Grundwasser und Sedimente.

Qualité du sol - Guide pour la détermination des valeurs de bruit de fond (ISO 19258:2005)

L'ISO 19258:2005 fournit des lignes directrices concernant la détermination des valeurs de bruit de fond pédogéochimiques et des valeurs de bruit de fond des substances inorganiques et organiques dans les sols. L'ISO 19258:2005 fournit également des lignes directrices en matière de stratégies d'échantillonnage et de traitement des données et identifie des méthodes d'échantillonnage et d'analyse. En revanche, l'ISO 19258:2005 ne donne pas de lignes directrices concernant la détermination des valeurs de bruit de fond pour les eaux souterraines et les sédiments.

Kakovost tal - Navodilo za določanje vrednosti naravnega ozadja (ISO 19258:2005)

Ta mednarodni standard podaja navodilo o načelih in glavnih metodah za določanje pedogeokemijskega naravnega ozadja in naravnega ozadja za anorganske in organske snovi v tleh. Ta mednarodni standard podaja navodilo za strategije vzorčenja in obdelavo podatkov ter identificira metode vzorčenja in analize. Ta mednarodni standard ne podaja navodila za določanje naravnega ozadja za podtalno vodo in sedimente.

General Information

Status
Withdrawn
Publication Date
28-Jun-2011
Withdrawal Date
18-Sep-2018
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
19-Sep-2018

Relations

Buy Standard

Standard
EN ISO 19258:2011
English language
31 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-november-2011
.DNRYRVWWDO1DYRGLOR]DGRORþDQMHYUHGQRVWLQDUDYQHJDR]DGMD ,62
Soil quality - Guidance on the determination of background values (ISO 19258:2005)
Bodenbeschaffenheit - Leitfaden zur Bestimmung von Hintergrundwerten (ISO
19258:2005)
Qualité du sol - Guide pour la détermination des valeurs de bruit de fond (ISO
19258:2005)
Ta slovenski standard je istoveten z: EN ISO 19258:2011
ICS:
13.080.99 Drugi standardi v zvezi s Other standards related to
kakovostjo tal soil quality
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 19258
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2011
ICS 13.080.99
English Version
Soil quality - Guidance on the determination of background
values (ISO 19258:2005)
Qualité du sol - Guide pour la détermination des valeurs de Bodenbeschaffenheit - Leitfaden zur Bestimmung von
bruit de fond (ISO 19258:2005) Hintergrundwerten (ISO 19258:2005)
This European Standard was approved by CEN on 10 June 2011.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same
status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2011 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 19258:2011: E
worldwide for CEN national Members.

Contents Page
Foreword .3

Foreword
The text of ISO 19258:2005 has been prepared by Technical Committee ISO/TC 190 “Soil quality” of the
International Organization for Standardization (ISO) and has been taken over as EN ISO 19258:2011 by
Technical Committee CEN/TC 345 “Characterization of soils” the secretariat of which is held by NEN.
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by December 2011, and conflicting national standards shall be withdrawn
at the latest by December 2011.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.
Endorsement notice
The text of ISO 19258:2005 has been approved by CEN as a EN ISO 19258:2011 without any modification.

INTERNATIONAL ISO
STANDARD 19258
First edition
2005-12-15
Soil quality — Guidance on the
determination of background values
Qualité du sol — Guide pour la détermination des valeurs de bruit
de fond
Reference number
ISO 19258:2005(E)
©
ISO 2005
ISO 19258:2005(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2005
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2005 – All rights reserved

ISO 19258:2005(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references. 1
3 Terms and definitions. 1
4 General. 3
5 Procedures. 3
5.1 General. 3
5.2 Objectives and technical approaches . 4
5.2.1 General. 4
5.2.2 Substances and parameters. 4
5.2.3 Study area. 6
5.2.4 Time period. 7
5.2.5 Scale of sampling (Support) . 7
5.3 Evaluation of existing data . 7
5.3.1 General. 7
5.3.2 Completeness of data sets/minimum requirements . 8
5.3.3 Comparability of data (Sampling, nomenclatures, analyses) . 8
5.3.4 Elimination of outliers . 9
5.4 Collection of new data. 9
5.4.1 Sampling. 9
5.4.2 Soil analysis. 12
5.5 Data processing and presentation. 13
5.5.1 Statistical evaluation of data . 13
5.5.2 Data presentation and reporting . 14
6 Data handling/quality control . 15
Annex A (informative) Scale of sampling. 17
Annex B (informative) Outlier tests . 19
Bibliography . 23

ISO 19258:2005(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 19258 was prepared by Technical Committee ISO/TC 190, Soil quality, Subcommittee SC 7, Soil and site
assessment.
iv © ISO 2005 – All rights reserved

INTERNATIONAL STANDARD ISO 19258:2005(E)

Soil quality — Guidance on the determination of background
values
1 Scope
This International Standard provides guidance on the principles and main methods for the determination of
pedo-geochemical background values and background values for inorganic and organic substances in soils.
This International Standard gives guidance on strategies for sampling and data processing and identifies
methods for sampling and analysis.
This International Standard does not give guidance on the determination of background values for
groundwater and sediments.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
ISO 10381-1, Soil quality — Sampling — Part 1: Guidance on the design of sampling programmes
ISO 10381-5, Soil quality — Sampling — Part 5: Guidance on the procedure for the investigation of urban and
industrial sites with regard to soil contamination
ISO 11074:2005, Soil quality — Vocabulary
3 Terms and definitions
For the purposes of this document, the terms and definitions given in ISO 11074 and the following apply.
3.1
background content
content of a substance in a soil resulting from both natural geological and pedological processes and including
diffuse source inputs
3.2
background value
statistical characteristic (3.8) of the background content
3.3
contaminant
substance or agent present in the soil as a result of human activity
NOTE There is no assumption in this definition that harm results from the presence of the contaminant.
ISO 19258:2005(E)
3.4
diffuse source input
input of a substance emitted from moving sources, from sources with a large area or from many sources
NOTE 1 The sources can be cars, application of substances through agricultural practices, emissions from town or
region, deposition through flooding of a river.
NOTE 2 Diffuse source input usually leads to sites that are relatively uniformly contaminated. At some sites, the input
conditions may nevertheless cause a higher local input such as near the source or where atmospheric deposition/rain is
increased.
[ISO 11074:2005]
3.5
pedo-geochemical content
content of a substance in a soil r
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.