Steel for packaging - Flat steel products intended for use in contact with foodstuffs, products and beverages for human and animal consumption - Non-coated steel (blackplate)

This document specifies the maximum content for alloying and residual elements (see Table 1) present in steel (usually called blackplate) used in the manufacture of packaging and packaging components or for coated steel which, as a finished product, are intended for use in direct contact with foodstuffs, products and beverages for human and pet food. For such use blackplate is normally coated but can be used uncoated for some fatty or dry products.
The main examples of use are:
-   tinplate and electrolytic chromium/chromium oxide coated steel for the manufacture of food and beverage cans ;
-    cans for conditioning foodstuffs (sugar, tea, cake, chocolate, pasta, etc.) ;
-   non-mineral oil drums, kegs, barrels.
The choice of material should be appropriate for the conditions of use.
This standard applies to cold-rolled strips in the form a coil or sheets.
This standard does not apply to categories of steel other than steel for packaging intended for use in contact with foodstuffs, products or beverages for human or animal consumption.

Verpackungsblech - Flacherzeugnisse aus Stahl für die Verwendung in Berührung mit Lebensmitteln, Produkten und Getränken für den menschlichen und tierischen Verzehr - Unbeschichteter Stahl (Feinstblech)

Dieses Dokument legt den maximalen Anteil an Legierungs- und Restelementen (siehe Tabelle 1) im Stahl
(allgemein als Feinstblech bezeichnet) fest, der für die Herstellung von Verpackungen und Verpackungsteilen
oder für Stahl mit Überzügen verwendet wird und als Endprodukt für die Verwendung in direkter Berührung
mit Lebensmitteln, Produkten und Getränken für den menschlichen und tierischen (Haustiere) Verzehr
bestimmt ist. Für diese Verwendung wird Feinstblech normalerweise beschichtet, kann aber auch
unbeschichtet für bestimmte ölige oder trockene Erzeugnisse verwendet werden.
Hauptbeispiele für die Anwendung sind:
Weißblech und elektrolytisch spezialverchromter Stahl für die Herstellung von Lebensmittel- und
Getränkekonserven;
Dosen zur Haltbarmachung von Lebensmitteln (Zucker, Tee, Kuchen, Schokolade, Teigwaren usw.);
Ölfässer und Fässchen.
Die Art der Materialien muss in Übereinstimmung mit deren Verwendung ausgesucht werden.
Diese Norm gilt für kaltgewalztes Band in der Form von Rollen oder Blechen.
Diese Norm ist nicht anwendbar auf andere Stähle als die für Verpackungsblech in Berührung mit
Lebensmitteln, Produkten oder Getränken für den menschlichen oder tierischen Verzehr.

Acier pour emballage - Produits plats en acier destiné à entrer au contact des denrées, produits et boissons pour l'alimentation de l'homme et des animaux - Acier non revêtu (fer noir)

La présente norme spécifie les teneurs maximales en éléments d'addition et résiduels présents dans l'acier (généralement appelé fer noir) servant à la fabrication d'emballages et éléments d'emballages ou d'acier revêtus qui, à l'état de produits finis, sont destinés à entrer en contact direct avec des denrées, produits et boissons pour l'alimentation de l'homme et des animaux. L'usage du fer noir non revêtu doit être limité aux contacts gras ou secs.
Les principaux exemples d'application sont les suivants :
-   fer noir pour la fabrication de fer blanc et fer chromé destiné à la fabrication de boîtes alimentaires ;
-   boîtes de conditionnement de produits alimentaires (sucre, thé, gâteaux, chocolat, pâtes, etc.) ;
-   bidons d'huile, tonnelets, fûts.
Le choix du matériau doit être en adéquation avec les conditions d'emploi.
La présente norme s'applique aux bandes laminées à froid.
La présente norme ne s'applique pas aux aciers hors emballages destinés à entrer en contact avec des denrées, produits et boissons pour l'alimentation de l'homme et des animaux.

Jekla za embalažo – Ploščati jekleni izdelki za uporabo v stiku s hrano, pijačami in drugimi izdelki za ljudi in živali – Neprevlečena (črna) pločevina

General Information

Status
Published
Publication Date
12-Apr-2005
Current Stage
9020 - Submission to 2 Year Review Enquiry - Review Enquiry
Due Date
15-Jul-2021
Completion Date
15-Jul-2021

Buy Standard

Standard
EN 10334:2005
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview

e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 10334:2005
01-julij-2005

-HNOD]DHPEDODåR±3ORãþDWLMHNOHQLL]GHONL]DXSRUDERYVWLNXVKUDQRSLMDþDPLLQ

GUXJLPLL]GHONL]DOMXGLLQåLYDOL±1HSUHYOHþHQD þUQD SORþHYLQD

Steel for packaging - Flat steel products intended for use in contact with foodstuffs,

products and beverages for human and animal consumption - Non-coated steel
(blackplate)

Verpackungsblech - Flacherzeugnisse aus Stahl für die Verwendung in Berührung mit

Lebensmitteln, Produkten und Getränken für den menschlichen und tierischen Verzehr -

Unbeschichteter Stahl (Feinstblech)

Acier pour emballage - Produits plats en acier destiné a entrer au contact des denrées,

produits et boissons pour l'alimentation de l'homme et des animaux - Acier non revetu

(fer noir)
Ta slovenski standard je istoveten z: EN 10334:2005
ICS:
67.250 Materiali in predmeti v stiku z Materials and articles in
živili contact with foodstuffs
77.140.50 3ORãþDWLMHNOHQLL]GHONLLQ Flat steel products and semi-
SROL]GHONL products
SIST EN 10334:2005 en

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 10334:2005
---------------------- Page: 2 ----------------------
SIST EN 10334:2005
EUROPEAN STANDARD
EN 10334
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2005
ICS 67.250
English version
Steel for packaging - Flat steel products intended for use in
contact with foodstuffs, products and beverages for human and
animal consumption - Non-coated steel (blackplate)

Acier pour emballage - Produits plats en acier destiné à Verpackungsblech - Flacherzeugnisse aus Stahl für die

entrer au contact des denrées, produits et boissons pour Verwendung in Berührung mit Lebensmitteln, Produkten

l'alimentation de l'homme et des animaux - Acier non und Getränken für den menschlichen und tierischen

revêtu (fer noir) Verzehr - Unbeschichteter Stahl (Feinstblech)
This European Standard was approved by CEN on 7 March 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 10334:2005: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 10334:2005
EN 10334:2005 (E)
Contents
Page

Foreword ..........................................................................................................................................................3

1 Scope ...................................................................................................................................................4

2 Normative references .........................................................................................................................4

3 Terms and definitions.........................................................................................................................4

4 Information to be provided by the purchaser ...................................................................................5

5 Dimensions and dimensional tolerances..........................................................................................5

6 Requirements ......................................................................................................................................5

6.1 Steel-making process .........................................................................................................................5

6.2 Chemical composition........................................................................................................................5

6.3 Oiling....................................................................................................................................................6

7 Checks .................................................................................................................................................7

8 Sampling..............................................................................................................................................7

9 Test method.........................................................................................................................................7

10 Designation .........................................................................................................................................7

11 Marking, labelling and packaging......................................................................................................7

Bibliography.....................................................................................................................................................8

---------------------- Page: 4 ----------------------
SIST EN 10334:2005
EN 10334:2005 (E)
Foreword

This document (EN 10334:2005) has been prepared by Technical Committee ECISS/TC 26 “Tinmill products -

Qualities, dimensions, tolerances and specific tests”, the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by October 2005, and conflicting national standards shall be withdrawn at

the latest by October 2005.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland

and United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 10334:2005
EN 10334:2005 (E)
1 Scope

This document specifies the maximum content for alloying and residual elements (see Table 1) present in

steel (usually called blackplate) used in the manufacture of packaging and packagi

...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.