EN ISO 4254-6:2009

Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)

ISO 4254-6:2009, to be used together with ISO 4254-1, specifies the safety requirements and their verification for the design and construction of mounted, semi-mounted, trailed and self-propelled agricultural sprayers for use with pesticide products and liquid fertilizer application, designed for use by one operator only. In addition, it specifies the type of information on safe working practices (including residual risks) to be provided by the manufacturer.
ISO 4254-6:2009 is not applicable to pedestrian‑controlled sprayers, knapsack sprayers, aerial sprayers or handheld spraying devices (e.g. spray guns).
ISO 4254-6:2009, taken together with ISO 4254-1, deals with all the significant hazards, hazardous situations and events relevant to sprayers and liquid fertilizer distributors when they are used as intended and under the conditions foreseen by the manufacturer, excepting the hazards arising from: automatically actuated height adjustment systems; electrostatic phenomena; electromagnetic compatibility; the environment, other than noise; inhalation of spraying chemical products due to a lack of effective methods to maintain breathing air quality inside the cab; roll-over and tip-over of self-propelled machines with a ride-on driver; vibration (except the declaration); dust emission; burns; moving parts for power transmission except strength requirements for guards and barriers; safety and reliability of control systems; travelling function of self-propelled machines.

Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgeräte (ISO/FDIS 4254-6:2009)

Dieser Teil von ISO 4254, der zusammen mit ISO 4254-1 anzuwenden ist, legt sicherheitstechnische
Anforderungen und deren Überprüfung für die Gestaltung und Konstruktion von angebauten, aufgesattelten,
gezogenen und selbstfahrenden landwirtschaftlichen Pflanzenschutzgeräten für die Anwendung von
Pflanzenschutz- und flüssigen Düngemitteln, die für den Betrieb durch eine Bedienungsperson bestimmt sind,
fest. Zusätzlich legt dieser Teil von ISO 4254 fest, welche Informationen zum sicheren Umgang (einschließlich
Restgefahren) vom Hersteller zur Verfügung zu stellen sind.
Dieser Teil von ISO 4254 gilt nicht für
⎯ Handgeführte Pflanzenschutzgeräte;
⎯ Rückentragbare Pflanzenschutzgeräte;
⎯ Pflanzenschutzausrüstung für Luftfahrzeuge;
⎯ Handgehaltene Spritzeinrichtungen (z. B. Spritzpistolen).
Wenn die in dieser Norm festgelegten Anforderungen von Anforderungen in ISO 4254-1 abweichen, haben im
Falle von Maschinen, die entsprechend den Festlegungen dieser Norm konstruiert und gebaut wurden, die
Anforderungen dieser Norm Vorrang vor den Festlegungen in ISO 4254-1.
Dieser Teil von ISO 4254 behandelt zusammen mit ISO 4254-1 alle signifikanten Gefährdungen, Gefährdungssituationen
und Gefährdungsereignisse, die für Pflanzenschutzgeräte und Geräte zum Ausbringen von
flüssigen Düngemitteln, die bestimmungsgemäß und unter den vom Hersteller vorgesehenen Bedingungen
eingesetzt werden, relevant sind (siehe Abschnitt 4). Ausgenommen sind Gefährdungen durch:
⎯ Automatisch funktionierende Systeme zur Höheneinstellung;
⎯ elektrostatische Vorgänge;
⎯ elektromagnetische Verträglichkeit;
⎯ Umwelt mit Ausnahme von Geräuschen;
⎯ Einatmen von Spritzmitteln auf Grund des Fehlens geeigneter Maßnahmen zur Aufrechterhaltung der
Atemluftqualität in der Kabine;
⎯ Umstürzen von selbstfahrenden Maschinen mit Fahrer;
⎯ Schwingungen (mit Ausnahme der Angabe);
⎯ Staubemissionen;

Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et distributeurs d'engrais liquides (ISO 4254-6:2009)

L'ISO 4254-6:2009, à utiliser conjointement avec l'ISO 4254-1, spécifie les exigences de sécurité et leur vérification pour la conception et la construction de pulvérisateurs agricoles portés, semi portés, traînés et automoteurs, conçus pour un seul opérateur, et destinés à appliquer des produits phytosanitaires et des engrais liquides. En outre, elle spécifie le type d'informations que le fabricant doit fournir sur les pratiques d'utilisation sûre (y compris les risques résiduels).
L'ISO 4254-6:2009 ne s'applique pas aux pulvérisateurs à conducteur à pied; aux pulvérisateurs à dos; aux pulvérisateurs montés sur aéronefs; aux dispositifs de pulvérisation tenus à la main (par exemple lance d'épandage).
L'ISO 4254-6:2009, prise avec l'ISO 4254-1, traite de tous les phénomènes dangereux, situations dangereuses et événements dangereux significatifs relatifs aux pulvérisateurs et distributeurs d'engrais liquides, lorsqu'ils sont utilisés normalement et dans les conditions prévues par le fabricant (voir l'Article 4), à l'exception des phénomènes dangereux provenant des systèmes de réglage de la hauteur actionnés automatiquement, des phénomènes électrostatiques, de la compatibilité électromagnétique, de l'environnement, autres que le bruit, de l'inhalation de produits chimiques épandus du fait du manque de méthodes efficaces pour maintenir une qualité d'air respirable à l'intérieur de la cabine, du renversement ou basculement des machines automotrices à conducteur porté, des vibrations (à l'exception de la déclaration), des émissions de poussières, des brûlures, des éléments mobiles de transmission de puissance, à l'exception des exigences de résistance des protecteurs et barres d'éloignement, des fonctions de déplacement des machines automotrices.

Kmetijski stroji - Varnost - 6. del: Škropilnice in naprave za razdeljevanje tekočih gnojil (ISO 4254-6:2009)

Ta del ISO 4254, ki se uporablja skupaj z ISO 4254-1, določa varnostne zahteve in njihovo preverjanje za načrtovanje in konstrukcijo nošenih, polnošenih, vlečenih in samognanih kmetijskih škopilnic za uporabo s pesticidnimi proizvodi in razdeljevanje tekočih gnojil, zasnovane tako, da jih uporablja samo en upravljavec. Poleg tega določa vrste podatkov glede varnih delovnih postopkov (vključno s preostalimi tveganji), ki jih mora zagotoviti proizvajalec. Ta del ISO 4254 se ne uporablja za: - ročno upravljane škropilnice; - nahrbtne škropilnice; - razprševalne škropilnice; - ročne naprave za škropljenje (npr. škropilne pištole). Kadar se določbe tega dela ISO 4254 razlikujejo od določb, navedenih v ISO 4254-1, imajo določbe tega dela ISO 4254 prednost pred določbami ISO 4254-1 za stroje, ki so bili načrtovani in izdelani v skladu z določbami tega dela ISO 4254. Ta del ISO 4254, skupaj z ISO 4254-1, obravnava vse velike nevarnosti, nevarna stanja in dogodke v zvezi s škropilnicami in napravami za razdeljevanje tekočih gnojil pri uporabi v skladu z namembnostjo in pod pogoji, ki jih je predvidel proizvajalec (glej Klavzulo 4), razen nevarnosti, ki izhajajo iz:  - sistemov za prilagoditev višine, ki se samodejno aktivirajo; - elektrostatičnih pojavov; - elektromagnetne združljivosti; - okolja, razen hrupa; - vdihovanja pršenih kemičnih proizvodov zaradi pomanjkanja učinkovitih metod za vzdrževanje kvalitete zraka za dihanje v kabini; - kotaljenja ali prevračanja samognanih strojev, na katerih se upravljavec vozi; - tresljajev (razen deklaracije); - emisij prahu; - opeklin.

General Information

• Status: Withdrawn
• Publication Date: 14-Sep-2009
• Withdrawal Date: 19-May-2020
• ICS: 65.060.40 - Plant care equipment
• Technical Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Drafting Committee: CEN/TC 144 - Tractors and machinery for agriculture and forestry
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 20-May-2020
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 98/37/EC - Machinery
• Mandate: M/396 - Mandate to CEN and Cenelec for standardisation in the field of machinery
• Mandate: M/BC/CEN/91/1 - Standardization request to CEN/CENELEC concerning machines presenting hazards due to mobility or load lifting
• Ref Project: SIST EN ISO 4254-6:2010 - Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)

Relations

• Replaces: EN 907:1997 - Agricultural and forestry machinery - Sprayers and liquid fertilizer distributors - Safety
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 4254-6:2020 - Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2020)
• Effective Date: 27-May-2020
• Corrected By: EN ISO 4254-6:2009/AC:2010 - Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO 4254-6:2009)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 4254-6:2010
01-april-2010
1DGRPHãþD
SIST EN 907:1998
.PHWLMVNLVWURML9DUQRVWGHOâNURSLOQLFHLQQDSUDYH]DUD]GHOMHYDQMHWHNRþLK
JQRMLO,62
Agricultural machinery - Safety - Part 6: Sprayers and liquid fertilizer distributors (ISO
4254-6:2009)
Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgeräte (ISO 4254-6:2009)
Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et distributeurs d'engrais liquides
(ISO 4254-6:2009)
Ta slovenski standard je istoveten z: EN ISO 4254-6:2009
ICS:
65.060.40 Oprema za nego rastlin Plant care equipment
SIST EN ISO 4254-6:2010 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 4254-6:2010

---------------------- Page: 2 ----------------------

SIST EN ISO 4254-6:2010


EUROPEAN STANDARD
EN ISO 4254-6

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2009
ICS 65.060.40 Supersedes EN 907:1997
English Version
Agricultural machinery - Safety - Part 6: Sprayers and liquid
fertilizer distributors (ISO 4254-6:2009)
Matériel agricole - Sécurité - Partie 6: Pulvérisateurs et Landmaschinen - Sicherheit - Teil 6: Pflanzenschutzgeräte
distributeurs d'engrais liquides (ISO 4254-6:2009) (ISO/FDIS 4254-6:2009)
This European Standard was approved by CEN on 26 August 2009.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the CEN Management Centre or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the
official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.






EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2009 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 4254-6:2009: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 4254-6:2010
EN ISO 4254-6:2009 (E)
Contents Page
Foreword .3
Annex ZA (informative) Relationship between this International Standard and the Essential
Requirements of EU Directive Machinery Directive 98/37/EC, amended by Directive
98/79/EC .5
Annex ZB (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .6

2

---------------------- Page: 4 ----------------------

SIST EN ISO 4254-6:2010
EN ISO 4254-6:2009 (E)
Foreword
This document (EN ISO 4254-6:2009) has been prepared by Technical Committee CEN/TC 144 “Tractors and
machinery for agriculture and forestry”, the secretariat of which is held by AFNOR, in collaboration with
Technical Committee ISO/TC 23 "Tractors and machinery for agriculture and forestry".
This European Standard shall be given the status of a national standard, either by publication of an identical
text or by endorsement, at the latest by March 2010, and conflicting national standards shall be withdrawn at
the latest by March 2010.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document supersedes EN 907:1997.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directives.
For relationship with EU Directives, see informative Annex ZA and ZB, which are integral parts of this
document.
This standard has been developed to support the Machinery Directive (98/37/EC and 2006/42/EC). However,
other directives can apply to the sprayers such as:
 Pressure Equi
...