EN ISO 7731:2005
(Main)Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO 7731:2003)
This International Standard specifies the physical principles of design, ergonomic requirements and the corresponding test methods for danger signals for public and work areas in the signal reception area and gives guidelines for the design of the signals. It may also be applied to other appropriate situations. The relevance given in the definitions as to the difference between an auditory emergency signal, auditory emergency evacuation signal and an auditory warning signal should be noted. The emergency evacuation signal is covered in ISO 8201. This International Standard does not apply to verbal danger warnings (e.g. shouts, loudspeaker announcements). ISO 9921 covers verbal danger signals. Special regulations such as those for a public disaster and public transport are not affected by this International Standard.
Ergonomie - Gefahrensignale für öffentliche Bereiche und Arbeitsstätten - Akustische Gefahrensignale (ISO 7731:2003)
Diese Internationale Norm legt die physikalischen Grundsätze der Gestaltung, ergonomische Anforderungen und die entsprechenden Prüfverfahren für Gefahrensignale für öffentliche Bereiche und Arbeitsstätten im Signalempfangsbereich fest und enthält Anleitungen für die Gestaltung der Signale. Sie kann auch auf weitere geeignete Situationen angewendet werden.
Die in den Definitionen angegebenen Unterschiede zwischen einem akustischen Notsignal, einem akustischen Notsignal für Räumung und einem akustischen Warnsignal sind zu beachten. Das Notsignal für Räumung wird in ISO 8201 behandelt.
Diese Internationale Norm gilt nicht für Gefahrenhinweise im Rahmen sprachlicher Verständigung (z. B. Zurufe, Lautsprecherdurchsagen). Mündlich gegebene Gefahrensignale werden in ISO 9921 behandelt.
Besondere Regelungen wie für den öffentlichen Katastrophenschutz und öffentlichen Verkehr bleiben von dieser Internationalen Norm unberührt.
Ergonomie - Signaux de danger pour lieux publics et lieux de travail - Signaux de danger auditifs (ISO 7731:2003)
Ergonomija – Signali za nevarnost na javnih in delovnih mestih – Zvočni signali za nevarnost (ISO 7731:2003)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-marec-2006
1DGRPHãþD
SIST EN 457:1998
(UJRQRPLMD±6LJQDOL]DQHYDUQRVWQDMDYQLKLQGHORYQLKPHVWLK±=YRþQLVLJQDOL]D
QHYDUQRVW ,62
Ergonomics - Danger signals for public and work areas - Auditory danger signals (ISO
7731:2003)
Ergonomie - Gefahrensignale für öffentliche Bereiche und Arbeitsstätten - Akustische
Gefahrensignale (ISO 7731:2003)
Ergonomie - Signaux de danger pour lieux publics et lieux de travail - Signaux de danger
auditifs (ISO 7731:2003)
Ta slovenski standard je istoveten z: EN ISO 7731:2005
ICS:
13.180 Ergonomija Ergonomics
13.320 Alarmni in opozorilni sistemi Alarm and warning systems
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 7731
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2005
ICS 13.320; 13.180 Supersedes EN 457:1992
English Version
Ergonomics - Danger signals for public and work areas -
Auditory danger signals (ISO 7731:2003)
Ergonomie - Signaux de danger pour lieux publics et lieux Ergonomie - Gefahrensignale für öffentliche Bereiche und
de travail - Signaux de danger auditifs (ISO 7731:2003) Arbeitsstätten - Akustische Gefahrensignale (ISO
7731:2003)
This European Standard was approved by CEN on 2 September 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 7731:2005: E
worldwide for CEN national Members.
Foreword
The text of ISO 7731:2003 has been prepared by Technical Committee ISO/TC 159
"Ergonomics” of the International Organization for Standardization (ISO) and has been taken
over as EN ISO 7731:2005 by Technical Committee CEN/TC 122 "Ergonomics", the secretariat
of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by March 2006, and conflicting national
standards shall be withdrawn at the latest by March 2006.
This document supersedes EN 457:1992.
This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU
Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 7731:2003 has been approved by CEN as EN ISO 7731:2005 without any
modifications.
ANNEX ZA
(informative)
Relationship between this European Standard and the Essential
Requirements of EU Directive 98/37 EEC
This European Standard has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association to provide a means of conforming to
Essential Requirements of the New Approach Directive 98/37 EEC, amended by 98/79/EEC.
Once this standard is cited in the Official Journal of the European Communities under that
Directive and has been implemented as a national standard in at least one Member State,
compliance with the normative clauses of this standard confers, within the limits of the scope of
this standard, a presumption of conformity with the corresponding Essential Requirements of
that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the product(s)
falling within the scope of this standard.
INTERNATIONAL ISO
STANDARD 7731
Second edition
2003-11-01
Ergonomics — Danger signals for public
and work areas — Auditory danger
signals
Ergonomie — Signaux de danger pour lieux publics et lieux
de travail — Signaux de danger auditifs
Reference number
ISO 7731:2003(E)
©
ISO 2003
ISO 7731:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved
ISO 7731:2003(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope. 1
2 Normative references . 1
3 Terms, definitions and symbols . 1
4 Safety requirements. 3
4.1 General. 3
4.2 Recognition . 3
4.2.1 Introduction . 3
4.2.2 Audibility. 3
4.2.3 Distinctiveness. 3
4.2.4 Unambiguity . 3
4.2.5 Moving sources. 3
4.3 Review of the signal. 4
4.4 Recommended maximum level of the danger signal . 4
5 Test methods. 4
5.1 Measurement equipment. 4
5.2 Objective acoustic measurements. 4
5.2.1 General. 4
5.2.2 Weighted measurements. 4
5.2.3 Measurements made in the frequency domain. 4
5.2.4 Measurement of the auditory signal with ambient noise present. 5
5.3 Subjective test method. 5
6 Design criteria for auditory danger signals. 5
6.1 General. 5
6.2 Sound-pressure level. 5
6.3 Spectral characteristics. 6
6.4 Temporal characteristics. 6
6.4.1 Temporal distribution of the danger signal. 6
6.4.2 Temporal distribution of the frequencies . 6
6.4.3 Duration of the danger signals . 7
6.5 Information required from suppliers. 7
Annex A (normative) Definitions of symbols. 8
Annex B (normative) Calculation of effective masked threshold. 9
Annex C (normative) Listening test.10
Annex D (informative) Examples of danger signals. 11
Bibliography . 17
ISO 7731:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 7731 was prepared by Technical Committee ISO/TC 159, Ergonomics, Subcommittee SC 5, Ergonomics
of the physical environment.
This second edition cancels and replaces the first edition (ISO 7731:1986), which has been technically revised.
iv © ISO 2003 — All rights reserved
ISO 7731:2003(E)
Introduction
This International Standard specifies criteria applicable to the recognition of auditory danger signals,
especially in cases where there is a high level of ambient noise. It covers auditory danger signals, desigated in
the text of this standard by the use of the phrase “danger signals”, which apply to emergency signals and
warning signals (see Table 1).
Auditory danger signals can also be found in
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.