Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000 modified)

This European Standard specifies the requirements for producing and inspecting girth, branch and fillet welds in the pipeline part of pipeline transportation systems for the petroleum and natural gas industries meeting the requirements of ISO 13623.
On-land supply systems used by the gas supply industry are excluded from the scope of the International Standard.
This European Standard is applicable to the requirements for welding of carbon and low-alloy steel pipes. Application is restricted to pipes with a diameter of 20 mm and larger and wall thickness of 3 mm or more, and a specified minimum yield strength of 555 MPa or less. It is also applicable to welding into pipelines, items such as spools, risers, launchers/receivers, fittings, flanges and "pups" to pipeline valves.
The welding processes covered are shielded metal arc welding, gas tungsten arc welding, gas metal arc welding, flux-cored arc welding with and without shielding gas, and submerged arc welding.
This European Standard is not applicable to flash girth welding, resistance welding, solid-phase welding or other one-shot welding processes, nor to longitudinal welds in pipe or fittings, to "hot-tap" welding of pipelines in service or to the welding of process piping outside of the scope of ISO 13623.
NOTE   Additional requirements may be necessary for welding of pipeline for particular pipeline operating conditions. These can include limitations on maximum hardness or strength, minimum impact toughness values, crack tip-opening dis
NOTE   Additional requirements may be necessary for welding of pipeline for particular pipeline operating conditions. These can include limitations on maximum hardness or strength, minimum impact toughness values, crack tip-opening displacement, all weld metal tensile testing or bend testing, thermal stress relief or others. Where appropriate, these additional requirements should be added to the requirements of this International Standard in a project-specific supplement.

Erdöl- und Erdgasindustrien - Rohrleitungstransportsysteme - Schweißen von Rohrleitungen (ISO 13847:2000 modifiziert)

Diese Europäische Norm legt die Anforderungen für die Herstellung und Prüfung von Umfangsnähten (Rund-nähten), Anschlussnähten und Kehlnähten in der Rohrleitung von Rohrleitungstransportsystemen für die Erdöl- und Erd-gasindustrien nach den Anforderungen in ISO 13623 fest.
Rohrleitungstransportsysteme für die Gasversorgung an Land fallen nicht in den Anwendungsbereich dieser Norm.
Diese Europäische Norm enthält die Anforderungen für das Schweißen von Rohren aus unlegiertem und niedriglegiertem Stahl. Der Anwendungsbereich beschränkt sich auf Rohre mit einem Durchmesser ab 20 mm und einer Wanddicke ab 3 mm mit einer festgelegten Mindest-Streckgrenze bis 555 MPa. Sie gilt auch für das Einschweißen von Ausrüstungsteilen in Rohrleitungen, z. B. Zwischenstücke, Steigleitungen, Molchaufgabe- und Molchempfangs-stationen, Formstücke, Flansche und ¿kurze Verbindungsstücke" für Rohrleitungsarmaturen.
Die folgenden Schweißverfahren sind in dieser Norm festgelegt: Lichtbogenhandschweißen, Wolfram-Inertgas-schweißen, Metall-Schutzgasschweißen, Metall-Lichtbogenschweißen mit Fülldrahtelektrode mit und ohne Schutzgas sowie Unterpulverschweißen.
Diese Europäische Norm gilt nicht für das Abbrennstumpfschweißen, Widerstandsschweißen, Festphasen-schweißen oder weitere Einstufenschweißverfahren, Längsnähte in Rohren oder Formstücken (Fittings), für das Schweißen an unter Druck, Medium und Temperaturen stehenden Rohrleitungen (Hot Tapping) oder für das Schweißen von Prozess-Rohrleitungen, die nicht in den Anwendungsbereich von ISO 13623 fallen.

Industries du pétrole et du gaz naturel - Conduites pour systèmes de transport - Soudage des conduites (ISO 13847:2000 modifiée)

Industrija za predelavo nafte in zemeljskega plina - Transportni cevovodni sistemi - Varjenje cevovodov (ISO 13847:2000, spremenjen)

General Information

Status
Published
Publication Date
11-Dec-2001
Withdrawal Date
29-Jun-2002
Current Stage
9092 - Decision on results of review/2YR ENQ - revise - Review Enquiry
Start Date
14-Feb-2007
Completion Date
14-Feb-2007

Relations

Buy Standard

Standard
EN 14163:2004
English language
59 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Industrija za predelavo nafte in zemeljskega plina - Transportni cevovodni sistemi - Varjenje cevovodov (ISO 13847:2000, spremenjen)Erdöl- und Erdgasindustrien - Rohrleitungstransportsysteme - Schweißen von Rohrleitungen (ISO 13847:2000 modifiziert)Industries du pétrole et du gaz naturel - Conduites pour systemes de transport - Soudage des conduites (ISO 13847:2000 modifiée)Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines (ISO 13847:2000 modified)75.200Petroleum products and natural gas handling equipment25.160.10Varilni postopki in varjenjeWelding processesICS:Ta slovenski standard je istoveten z:EN 14163:2001SIST EN 14163:2004en01-maj-2004SIST EN 14163:2004SLOVENSKI
STANDARD



SIST EN 14163:2004



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 14163December 2001ICS 25.160.10; 75.200English versionPetroleum and natural gas industries - Pipeline transportationsystems - Welding of pipelines (ISO 13847:2000 modified)Industries du pétrole et du gaz naturel - Conduites poursystèmes de transport - Soudage des conduites (ISO13847:2000 modifiée)This European Standard was approved by CEN on 21 October 2001.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2001 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 14163:2001 ESIST EN 14163:2004



EN 14163:2001 (E)2ContentspageExplanary Note.3Foreword.4Introduction.51Scope.62Normative references.63Terms and definitions.74Symbols and abbreviated terms.95Welding procedure specification testing and approval.106Approval and testing of welders and welding operators.267Production welding.308Non-destructive examination.369Acceptance criteria for non-destructive examination.4210Repair and removal of defects.4711Documentation.47Annex A (informative)
Hyperbaric welding.49Annex B (informative)
Special requirements for welding of CRA-clad steel and CRA pipelines.51Annex C (informative)
Recommendations for brazing and aluminothermic welding of anode leads.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.