Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods

This European Standard specifies the requirements for light transmitting flat solid polycarbonate (PC) sheets for internal and external use in walls, roofs and ceilings.
This European Standard applies to light transmitting flat extruded solid PC sheets of minimum thickness 2 mm, without or with uniform functional layers (e.g. coating, co-extruded layer) made from PC-based or other materials.
It also specifies the test methods needed for the evaluation of conformity and marking of the sheets.

Lichtdurchlässige, flache Massivplatten aus Polycarbonat (PC) für Innen- und Außenanwendungen an Dächern, Wänden und Decken - Anforderungen und Prüfverfahren

Diese Europäische Norm legt die Anforderungen an lichtdurchlässige, flache Massivplatten aus Polycarbonat (PC) für Innen- und Außenanwendungen an Wänden, Dächern und Decken fest.
Diese Europäische Norm gilt für lichtdurchlässige, flache, extrudierte Massivplatten aus PC mit einer Mindestdicke von 2 mm, mit oder ohne gleichmäßigen Funktionsschichten (z. B. Beschichtung, koextrudierte Schicht) aus PC basierten oder sonstigen Materialien.
Außerdem legt sie die für die Evaluierung der Konformität und die Kennzeichnung der Platten erforderlichen Prüfverfahren fest.

Plaques d’éclairement pleines planes en polycarbonate (PC) pour usage intérieur ou extérieur dans les toitures, bardages et plafonds - Exigences et méthodes d’essai

La présente Norme européenne spécifie les exigences relatives aux plaques d'éclairement pleines planes en polycarbonate (PC) pour usage intérieur ou extérieur dans les toitures, bardages et plafonds.
La présente Norme européenne s'applique aux plaques d'éclairement pleines planes extrudées en PC d'une épaisseur minimale de 2 mm, avec ou sans couches fonctionnelles uniformes (par exemple, revêtement, couche co-extrudée) en matériaux à base de PC ou autres matières plastiques.
Elle spécifie également les méthodes d'essai nécessaires pour l'évaluation de la conformité ainsi que le marquage des plaques.

Prosojne, ploščate, masivne polikarbonatne (PC) plošče za notranje in zunanje strehe, stene in strope - Zahteve in preskusne metode

General Information

Status
Published
Publication Date
03-Dec-2013
Withdrawal Date
29-Jun-2014
Current Stage
9093 - Decision to confirm - Review Enquiry
Completion Date
22-Jul-2022

Buy Standard

Standard
EN 16240:2014
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Lichtdurchlässige, flache, massive Platten aus Polycarbonat (PC) für Innen- und Außenanwendungen an Dächern, Wänden und Decken - Anforderungen und PrüfverfahrenPlaques d'éclairement pleines planes en polycarbonate (PC) pour toitures, bardages et plafonds intérieurs et extérieurs - Exigences et méthodes d'essaiLight transmitting flat solid polycarbonate (PC) sheets for internal and external roofs, walls and ceilings - Requirements and test methods91.060.20StreheRoofs91.060.10Stene. Predelne stene. FasadeWalls. Partitions. Facades83.140.10Filmi in folijeFilms and sheetsICS:Ta slovenski standard je istoveten z:EN 16240:2013SIST EN 16240:2014en,de01-februar-2014SIST EN 16240:2014SLOVENSKI
STANDARD



SIST EN 16240:2014



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 16240
December 2013 ICS 83.140.10; 91.060.10 English Version
Light transmitting flat solid polycarbonate (PC) sheets for internal and external use in roofs, walls and ceilings - Requirements and test methods
Plaques d'éclairement pleines planes en polycarbonate (PC) pour usage intérieur ou extérieur dans les toitures, bardages et plafonds - Exigences et méthodes d'essai
Lichtdurchlässige, flache Massivplatten aus Polycarbonat (PC) für Innen- und Außenanwendungen an Dächern, Wänden und Decken - Anforderungen und Prüfverfahren This European Standard was approved by CEN on 5 October 2013.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2013 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 16240:2013 ESIST EN 16240:2014



EN 16240:2013 (E) 2 Contents Page
Foreword .4 Introduction .5 1 Scope .6 2 Normative references .6 3 Terms, definitions and symbols .7 3.1 Terms and definitions .7 3.2 Symbols .8 4 Requirements .9 4.1 Visual appearance .9 4.2 Dimensions and mass per unit area and their tolerances .9 4.3 Spectral characteristics . 10 4.4 Total solar energy transmittance . 10 4.5 Impact resistance. 11 4.6 Durability .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.