iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

prEN ISO 22014

(Main)

Library objects for architecture, engineering, construction, and use (ISO/DIS 22014:2023)

Library objects for architecture, engineering, construction, and use (ISO/DIS 22014:2023)

Recommendations for defining format and content for construction library objects to support project briefing, design, tendering, construction, and management of built assets. It is intended for all professionals and service providers using generic and product specific data, supporting then development of information throughout the process. To develop an International Standard giving principles and definitions for the symbolic and simplified visual presentation of objects in connection with Building Information Modelling (BIM), and their organization into libraries.

Bibliotheksobjekte für Architektur, Ingenieur- und Bauwesen und Gebrauch (ISO/DIS 22014:2023)

Objets de bibliothèque pour l’architecture, l’ingénierie, la construction et l’utilisation (ISO/DIS 22014:2023)

Knjižnični objekti za arhitekturo, inženiring, gradbeništvo in uporabo (ISO/DIS 22014:2023)

General Information

Status
Not Published
Publication Date
04-Nov-2024
ICS
03.100.30 - Management of human resources
35.240.67 - IT applications in building and construction industry
91.010.01 - Construction industry in general
Technical Committee
CEN/TC 442 - Building Information Modelling (BIM)
Drafting Committee
CEN/TC 442 - Building Information Modelling (BIM)
Current Stage
4599 - Dispatch of FV draft to CMC - Finalization for Vote
Start Date
17-Nov-2023
Due Date
26-Apr-2024
Completion Date
17-Nov-2023
Ref Project
oSIST prEN ISO 22014:2023 - Library objects for architecture, engineering, construction, and use (ISO/DIS 22014:2023)

Buy Standard

prEN ISO 22014:2023 - BARVEprEN ISO 22014:2023 - BARVE
PreviousNext
Draft
prEN ISO 22014:2023 - BARVE
English language
45 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 22014:2023
01-junij-2023
Knjižnični objekti za arhitekturo, inženiring, gradbeništvo in uporabo (ISO/DIS
22014:2023)
Library objects for architecture, engineering, construction, and use (ISO/DIS
22014:2023)
Bibliotheksobjekte für Architektur, Ingenieur- und Bauwesen und Gebrauch (ISO/DIS
22014:2023)
Objets de bibliothèque pour l’architecture, l’ingénierie, la construction et l’utilisation
(ISO/DIS 22014:2023)
Ta slovenski standard je istoveten z: prEN ISO 22014
ICS:
03.100.30 Vodenje ljudi Management of human
resources
35.240.67 Uporabniške rešitve IT v IT applications in building
gradbeništvu and construction industry
91.010.01 Gradbeništvo na splošno Construction industry in
general
oSIST prEN ISO 22014:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 22014:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 22014:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 22014
ISO/TC 10/SC 8 Secretariat: SIS
Voting begins on: Voting terminates on:
2023-04-11 2023-07-04
Library objects for architecture, engineering, construction,
and use
ICS: 35.240.67; 01.100.30; 91.010.01
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 22014:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 22014:2023
ISO/DIS 22014:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 22014
ISO/TC 10/SC 8 Secretariat: SIS
Voting begins on: Voting terminates on:

Library objects for architecture, engineering, construction,
and use
ICS: 35.240.67; 01.100.30; 91.010.01
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 22014:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 22014:2023
ISO/DIS 22014:2023(E)
Contents Page
Foreword . vi
Introduction .vii
1 Scope . 1
2 Normative references . 1
3 Terms and d
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 20137:2023(Main)
Leather - Chemical tests - Guidelines for testing critical chemicals in leather (ISO 20137:2023)
kSIST FprEN ISO 20137:2023

This document provides lists of chemicals that have already been detected in leather and guidelines for applying the available chemical test methods for leather. This information can be used by those involved in setting specifications for leather, especially for those parameters relating to restricted chemical substances.
Generic lists of restricted chemicals used on the market contain many substances that are not relevant to the leather industry. Those chemical substances that are not mentioned in this document do not need to be determined, thus avoiding unnecessary analytical costs.
NOTE            Due to the constantly changing legal requirements and toxicological evaluation of chemical substances, this document cannot address all potentially critical substances.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17468:2023(Main)
Microbiology of the food chain - Technical requirements and guidance on the establishment or revision of a standardized reference method (ISO 17468:2023)
kSIST FprEN ISO 17468:2023

This document gives technical requirements and guidance on the establishment or revision of standardized reference methods used for the analysis of microorganisms in:
—    products intended for human consumption;
—    products for feeding animals;
—    environmental samples in the area of food and feed production and handling;
—    samples from the primary production stage.
This document specifies the technical stages of the establishment of a new standardized reference method and of the revision of an existing standardized reference method. It includes, in particular, requirements and guidance on the validation of the selected method.
This document is intended to be implemented in particular by ISO/TC 34/SC 9 and its corresponding structure at CEN level, which is CEN/TC 463.

  • Draft
    16 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17331:2023(Main)
Construction products: Assessment of release of dangerous substances - Content of organic substances - Methods for extraction and analysis
kSIST FprEN 17331:2023

This document specifies analytical methods for the determination of the content of specific organic substances in construction products.
The following parameters are covered: BTEX, biocides, dioxins, furans and dioxin-like PCBs, mineral oil, nonylphenols, PAH, PCB, PCP, PBDE, and short-chain chlorinated paraffins.
NOTE 1   Methods still under development or available at national level only are listed in Annex B (informative) for PFOS, PFOA, HBCD and EOX. The methods can be included in the normative text as soon as full EN standards are available.
NOTE 2   Methods that have not been validated for construction products, because no suitable material was available at the time of the robustness validation, only are listed in Annex B (informative). This applies to organotin compounds, phenols and phthalates.
The methods listed in this document come from different fields and are expected to be suitable for organic substances in organic extracts from all types of constructions products.
The methods in this document are validated for the product types listed in Annex A (informative).
NOTE 3   Construction products include, e.g. mineral-based products (S), bituminous products (B), wood-based products (W), plastic and rubbers (P), sealants and adhesives (A), paints and coatings (C) and metals (M) (see also CEN/TR 16045). This document includes analytical methods for all matrices except metals.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
CEN/TS 19102:2023(Main)
Design of tensioned membrane structures
kSIST-TS FprCEN/TS 19102:2023

1.1   Scope of CEN/TS 19102
(1) This document applies to the design of buildings and structural works, made of structural membrane material. It provides guidance for the design of tensioned membrane structures, either mechanically or pneumatically tensioned at a defined prestress level.
NOTE 1   Membrane materials comprise structural fabrics, coated structural fabrics and foils.
NOTE 2   For elements of tensile surface structures not governed by this Technical Specification (for example made of steel, aluminium, wood or other structural materials), see relevant Eurocode parts.
(2) This document is concerned with the requirements for resistance, serviceability and durability of tensioned membrane structures, as given in EN 1990.
NOTE 1   The safety criteria follow EN 1990 and will consider specific limit states for tensioned membrane structures.
NOTE 2   Specific requirements concerning seismic design are not considered.
(3) Design and verification in this document is based on limit state design in conjunction with the partial factor method.
NOTE   Special attention goes to the action of prestress, snow, wind and rain action on membrane structures and the combined effect of wind and rain or snow.
(4) This document covers analysis methodologies appropriate for tensioned membrane structures, from analytical to full numerical simulation methods.
(5) This document considers connections between membrane materials and between membrane materials and others.
(6) This document is applicable for hybrid membrane structures integrating different kinds of load bearing behaviour (tension, compression, bending, inflation…), in a way that the structural membrane shares loadbearing capacity with other structural elements made of different materials.
NOTE   The term ‘hybrid structure’ refers to this combined structural behaviour or use of materials.
1.2   Assumptions
(1) The assumptions of EN 1990 apply to this document.
(2) This document is intended to be used in conjunction with EN 1990, the EN 1991 series, the EN 1993 series, the EN 1999 series, ENs, EADs and ETAs for construction products relevant to tensioned membrane structures.

  • Draft
    103 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17845:2023(Main)
Construction products: Assessment of release of dangerous substances - Determination of biocide residues using liquid chromatography with mass spectrometric detection (LC-MS/MS)
kSIST FprEN 17845:2023

This document describes a method for the determination of the content of biocides in construction products, (either finished (dried) or in a ready-to-use state) and in eluates thereof, using liquid chromatography and tandem mass spectrometric detection (LC-MS/MS).
For content analysis liquid chromatography with UV-detection can also be used, if sufficient sensitivity and selectivity is ensured (see Annex A (normative)).
The method in this document is validated for the product types listed in Annex D (informative). For eluate analysis quantification limits of 0,1 µg/l can be achieved.

  • Draft
    31 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15213-2:2023(Main)
Microbiology of the food chain - Horizontal method for the detection and enumeration of Clostridium spp. - Part 2: Enumeration of Clostridium perfringens by colony-count technique (ISO 15213-2:2023)
kSIST FprEN ISO 15213-2:2023

This document specifies the enumeration of Clostridium (C.) perfringens by colony-count technique.
This document is applicable to:
—    products intended for human consumption;
—    products for feeding animals;
—    environmental samples in the area of food and feed production and handling;
—    samples from the primary production stage.
NOTE            This method has been validated in an interlaboratory study for the following food categories:
—     ready-to-eat, ready-to-reheat meat products;
—     eggs and egg products (derivates);
—     processed fruits and vegetables;
—     infant formula and infant cereals;
—     multi-component foods or meal components.
It has also been validated for the following other categories:
—     pet food and animal feed;
—     environmental samples (food or feed production).
As this method has been validated for at least five food categories, this method is applicable for a broad range of food. For detailed information on the validation, see Clause 11 and Annex C. Since the method is not commonly used for samples in the primary production stage, this category was not included in the interlaboratory study. Therefore, no performance characteristics were obtained for this category.
This horizontal method was originally developed for the examination of all samples belonging to the food chain. Based on the information available at the time of publication of this document, this method is considered to be fully suited to the examination of all samples belonging to the food chain. However, because of the large variety of products in the food chain, it is possible that this horizontal method is not appropriate in every detail for all products. Nevertheless, it is expected that the required modifications are minimized so that they do not result in a significant deviation from this horizontal method.
This technique is suitable for, but not limited to, the enumeration of microorganisms in test samples with a minimum of 10 colonies counted on a plate. This corresponds to a level of contamination that is expected to be higher than 10 cfu/ml for liquid samples or higher than 100 cfu/g for solid samples.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 18279:2023(Main)
Brazing - Imperfections in brazed joints (ISO 18279:2023)
oSIST prEN ISO 18279:2022

This document details a classification of imperfections that can occur in brazing joints. In addition, guidance is provided on quality levels and suggested limits for imperfections are detailed.
For requirements not covered by this document, reference can be made to other sources, such as statutory regulations, codes of practice and technical delivery conditions.
No information is given on how imperfections are to be assessed in individual cases because this depends on the requirements for the particular brazed joint. These imperfections are not always detectable by the use of non-destructive testing alone.
This document covers only imperfections that can occur in connection with brazing without the effect of any additional service loads. Only the type, shape and position of such imperfections are covered; no indication is given of the conditions of occurrence or causes.
For requirements for brazed joints which are relevant and essential to the particular function of the component, reference can be made to the relevant documentation, for example manufacturing documents or procedure sheets.
It is important that these requirements be precisely prescribed and that conformity with them be verifiable. Conformity can be established by testing either the brazed assembly itself or a test piece produced under comparable conditions.
This document does not specify requirements for acceptance levels for imperfections, since these will differ very markedly depending on the application, but it does suggest some quality levels which can be of value in the absence of more detailed information.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52926-1:2023(Main)
Additive Manufacturing of metals - Qualification principles - Part 1: General qualification of operators (ISO/ASTM 52926-1:2023)
kSIST FprEN ISO/ASTM 52926-1:2023

This document specifies the activities and responsibilities of the AM operators in the field of the additive manufacturing (AM) technologies dealing with metallic parts production.
This document is intended to provide guidance for qualification of AM machine operators in general industrial applications. Where industry-specific requirements exist for the qualification of AM operators, such as ISO/ASTM 52942 for aerospace applications, those industry-specific standards are used instead of this document.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52926-5:2023(Main)
Additive manufacturing of metals - Qualification principles - Part 5: Qualification of operators for DED-Arc (ISO/ASTM 52926-5:2023)
kSIST FprEN ISO/ASTM 52926-5:2023

This document identifies the capabilities and responsibilities required for the qualification of the AM operators on the field of the additive manufacturing technologies dealing with metallic parts production, specifically for the employment of directed energy deposition – arc with metals (DED-Arc/M).
This document identifies criteria for the theoretical and practical assessment of personnel operating DED-Arc/M machines. The activities and procedures foreseen to be performed by the DED-Arc/M operator are also part of this document.
This document is intended to provide an outline for qualification of AM machine operators in general industrial applications.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO/ASTM 52908:2023(Main)
Additive manufacturing of metals - Finished Part properties - Post-processing, inspection and testing of parts produced by powder bed fusion (ISO/ASTM 52908:2023)
kSIST FprEN ISO/ASTM 52908:2023

This document specifies requirements for the qualification, quality assurance and post processing for metal parts made by powder bed fusion.
This document specifies methods and procedures for testing and qualification of various characteristics of metallic parts made by additive manufacturing powder bed fusion processes, in accordance with ISO/ASTM 52927, categories H and M.
This document is intended to be used by part providers and/or customers of parts.
This document specifies qualification procedures where appropriate to meet defined quality levels.

  • Draft
    29 pages
    English language
    sale 10% off
    e-Library read for
    1 day