EN ISO 1516:2002
(Main)Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
This International Standard specifies a method to determine if paints, varnishes, paint binders, solvents, petroleum or related products, when maintained at a selected equilibrium temperature and under the conditions of the test, give off sufficient flammable vapour to cause ignition on application of an external source of flame applied in a standard manner.
This International Standard is not applicable to water-borne paints which may, however, be tested using ISO 3680.
The method is suitable for use over the temperature range -30 °C to 110 °C, depending on the use of different apparatus listed in Table 1.
The interpretation of results obtained from solvent mixtures containing halogenated hydrocarbons, should be considered with caution, as these mixtures can give anomalous results.
Flammpunktbestimmung - Ja/Nein-Verfahren - Gleichgewichtsverfahren mit geschlossenem Tiegel (ISO 1516:2002)
Diese Internationale Norm legt ein Verfahren fest, mit dem bestimmt werden kann, ob Beschichtungsstoffe, Bindemittel, Lösemittel, Mineralölerzeugnisse und verwandte Produkte, so sie bei einer gewählten Gleichgewichtstemperatur nach festgelegtem Verfahren temperiert werden, genügend brennbare Dämpfe abgeben, um diese durch eine externe Zündflamme, betätigt nach festgelegtem Verfahren, zu entzünden.
Diese Internationale Norm ist nicht anwendbar auf Wasserlacke; diese können nach ISO 3680 [2] geprüft werden.
Dieses Verfahren ist für einen Temperaturbereich von -30 °C bis 110 °C geeignet, je nach Anwendungsbereich der unterschiedlichen, in Tabelle 1 aufgeführten Prüfeinrichtungen.
Die Ergebnisse von Lösemittelgemischen, die halogenierte Kohlenwasserstoffe enthalten, müssen sehr vorsichtig und kritisch interpretiert werden, da solche Gemische anormale Ergebnisse zeigen können.
Essai de point d'éclair de type passe/ne passe pas - Méthode à l'équilibre en vase clos (ISO 1516:2002)
La présente Norme internationale spécifie une méthode permettant de déterminer si des peintures, vernis, bases de peintures, solvants, produits pétroliers ou produits connexes, maintenus dans les conditions de l'essai à une température d'équilibre choisie, génèrent suffisamment de vapeurs inflammables pour provoquer leur inflammation par présentation d'une flamme externe de manière normalisée.
La présente Norme internationale n'est pas applicable aux peintures renfermant de l'eau; celles-ci peuvent être analysées conformément à l'ISO 3680.
La méthode est applicable dans la gamme de température s'étendant de - 30 °C à 110 °C, en utilisant les différents appareils indiqués dans le Tableau 1.
Il convient de considérer avec circonspection les résultats obtenus sur des mélanges de solvants contenant des hydrocarbures halogénés, ces mélanges pouvant donner des résultats anormaux.
Določevanje pojava plamena - Ravnotežna metoda v zaprti posodi (ISO 1516:2002)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST EN ISO 1516:2002
01-september-2002
'RORþHYDQMHSRMDYDSODPHQD5DYQRWHåQDPHWRGDY]DSUWLSRVRGL ,62
Determination of flash/no flash - Closed cup equilibrium method (ISO 1516:2002)
Flammpunktbestimmung - Ja/Nein-Verfahren - Gleichgewichtsverfahren mit
geschlossenem Tiegel (ISO 1516:2002)
Essai de point d'éclair de type passe/ne passe pas - Méthode a l'équilibre en vase clos
(ISO 1516:2002)
Ta slovenski standard je istoveten z: EN ISO 1516:2002
ICS:
75.080 Naftni proizvodi na splošno Petroleum products in
general
87.040 Barve in laki Paints and varnishes
SIST EN ISO 1516:2002 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST EN ISO 1516:2002
---------------------- Page: 2 ----------------------
SIST EN ISO 1516:2002
EUROPEAN STANDARD
EN ISO 1516
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2002
ICS 75.080; 87.040
English version
Determination of flash/no flash - Closed cup equilibrium method
(ISO 1516:2002)
Essai de point d'eclair de type passe/ne passe pas - Flammpunktbestimmung - Ja/Nein-Verfahren -
Méthode à l'équilibre en vase clos (ISO 1516:2002) Gleichgewichtsverfahren mit geschlossenem Tiegel (ISO
1516:2002)
This European Standard was approved by CEN on 1 March 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2002 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 1516:2002 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 1516:2002
EN ISO 1516:2002 (E)
CORRECTED 2002-05-08
Foreword
This document (ISO 1516:2002) has been prepared by Technical Committee ISO/TC 28
"Petroleum products and lubricants" in collaboration with Technical Committee CEN/TC 19
"Petroleum products, lubricants and related products", the secretariat of which is held by
NEN.
This European Standard shall be given the status of a national standard, either by publication
of an identical text or by endorsement, at the latest by September 2002, and conflicting
national standards shall be withdrawn at the latest by September 2002.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy,
Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the
United Kingdom.
Endorsement notice
The text of the International Standard ISO 1516:2002 has been approved by CEN as a
European Standard without any modifications.
NOTE Normative references to International Standards are listed in annex ZA (normative).
2
---------------------- Page: 4 ----------------------
SIST EN ISO 1516:2002
EN ISO 1516:2002 (E)
Annex ZA
(normative)
Normative references to international publications
with their relevant European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions
of any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE Where an International Publication has been modified by common modifications,
indicated by (mod.), the relevant EN/HD applies.
Publication Year Title EN Year
ISO 1523 2002 Determination of flash point - Closed EN ISO 1523 2002
cup equilibrium method
ISO 2719 1988 Petroleum products and lubricants - EN 22719 1993
Determination of flash point -
Pensky-Martens closed cup method
ISO 3170 1998 Petroleum liquids - Manual sampling EN ISO 3170 1998
ISO 3171 1988 Petrol
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.