CEN/TR 14520:2007
(Main)Packaging - Reuse - Methods for assessing the performance of a reuse system
Packaging - Reuse - Methods for assessing the performance of a reuse system
This Technical Report gives methods of assessing the performance of a reuse system related to the proportion of reused packaging in use. This may be measured by:
- the average number of rotations during a calculation period and the lifetime; or
- the reuse ratio.
The choice of method will vary according to the type of reuse system and information available.
Verpackung - Wiederverwendung - Verfahren zur Einschätzung der Leistungsfähigkeit eines Wiederverwendungssystems
Dieser Technische Bericht gibt Verfahren zur Beurteilung der Leistungsfähigkeit eines Wiederverwendungs¬systems in Bezug auf den Anteil der genutzten wiederverwendbaren Verpackung an. Diese ist messbar durch:
die durchschnittliche Anzahl der Kreislaufdurchgänge innerhalb einer Berechnungsperiode und der Lebensdauer; oder
den Wiederverwendungsanteil.
Die Wahl des Verfahrens ist abhängig von der Art des Wiederverwendungssystems und den verfügbaren Daten.
Emballage - Réutilisation - Méthode d'évaluation de la performance d'un système de réutilisation
Embalaža - Večkratna uporaba - Metode za ocenjevanje lastnosti delovanja sistema za večkratno uporabo
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TP CEN/TR 14520:2008
01-januar-2008
1DGRPHãþD
SIST-TP CEN/TR 14520:2005
(PEDODåD9HþNUDWQDXSRUDED0HWRGH]DRFHQMHYDQMHODVWQRVWLGHORYDQMD
VLVWHPD]DYHþNUDWQRXSRUDER
Packaging - Reuse - Methods for assessing the performance of a reuse system
Verpackung - Wiederverwendung - Verfahren zur Einschätzung der Leistungsfähigkeit
eines Wiederverwendungssystems
Emballage - Réutilisation - Méthode d'évaluation de la performance d'un systeme de
réutilisation
Ta slovenski standard je istoveten z: CEN/TR 14520:2007
ICS:
13.030.50 Recikliranje Recycling
55.020 Pakiranje in distribucija blaga Packaging and distribution of
na splošno goods in general
SIST-TP CEN/TR 14520:2008 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TP CEN/TR 14520:2008
---------------------- Page: 2 ----------------------
SIST-TP CEN/TR 14520:2008
TECHNICAL REPORT
CEN/TR 14520
RAPPORT TECHNIQUE
TECHNISCHER BERICHT
July 2007
ICS 13.030.50; 55.180.40
English Version
Packaging - Reuse - Methods for assessing the performance of
a reuse system
Emballage - Réutilisation - Méthode d'évaluation de la Verpackung - Wiederverwendung - Verfahren zur
performance d'un système de réutilisation Einschätzung der Leistungsfähigkeit eines
Wiederverwendungssystems
This Technical Report was approved by CEN on 25 May 2007. It has been drawn up by the Technical Committee CEN/TC 261.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,
Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2007 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TR 14520:2007: E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TP CEN/TR 14520:2008
CEN/TR 14520:2007 (E)
Contents Page
Foreword.3
Introduction .4
1 Scope.5
2 Terms and definitions .5
3 Methods of calculation.6
3.1 Open and closed loop systems.6
3.1.1 Principle.6
3.1.2 Calculation of average number of rotations in the system during the calculation period .6
3.1.3 Calculation of reuse ratio.7
3.1.4 Calculation of average number of rotations in the system during the packaging lifetime.8
3.2 Hybrid system.8
4 Factors influencing the calculation .8
4.1 Selection of calculation period.8
4.2 Selection of measurement point .9
4.3 Market fluctuation and product lifecycle.9
Annex A (informative) Trips and rotations.10
Annex B (informative) Examples of average number of rotations and reuse ratio calculations .11
B.1 Average number of rotations.11
B.1.1 Example 1.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.