EN ISO 13503-5:2006
(Main)Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006)
Petroleum and natural gas industries - Completion fluids and materials - Part 5: Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006)
ISO 13503-5:2006 provides standard testing procedures for evaluating proppants used in hydraulic fracturing and gravel packing operations. ISO 13503-5:2006 provides a consistent methodology for testing performed on hydraulic fracturing and/or gravel packing proppants. The "proppants" mentioned henceforth in this part of ISO 13503-5:2006 refer to sand, ceramic media, resin-coated proppants, gravel packing media, and other materials used for hydraulic fracturing and gravel-packing operations.
ISO 13503-5:2006 is not applicable for use in obtaining absolute values of proppant pack conductivities under downhole reservoir conditions.
Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und Materialien - Teil 5: Verfahren zur Messung der Langzeitleitfähigkeit von Stützmaterialien (ISO 13503-5:2006)
Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 5: Modes opératoires pour mesurer la conductivité à long terme des agents de soutènement (ISO 13503-5:2006)
L'ISO 13503-5:2006 fournit des modes opératoires d'essais normalisés pour l'évaluation des agents de soutènement utilisés dans les opérations de fracturation hydraulique et de gravillonnage.
L'ISO 13503-5:2006 est de fournir une méthodologie cohérente d'essai des agents de soutènement utilisés pour les opérations de fracturation hydraulique et/ou de remplissage de gravier. Il n'est pas prévu qu'elle soit utilisée pour déduire des valeurs absolues de conductivités de matériaux de soutènement dans des conditions de fond.
Industrija za predelavo nafte in zemeljskega plina - Tekočine in materiali za zaključna dela - 5. del: Postopki za merjenje dolgoročne prevodnosti podpornih materialov (ISO 13503-5:2006)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2007
Industrija za predelavo nafte in zemeljskega plina - Tekočine in materiali za
zaključna dela - 5. del: Postopki za merjenje dolgoročne prevodnosti podpornih
materialov (ISO 13503-5:2006)
Petroleum and natural gas industries - Completion fluids and materials - Part 5:
Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006)
Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und Materialien - Teil 5:
Verfahren zur Messung der Langzeitleitfähigkeit von Stützmaterialien (ISO 13503-
5:2006)
Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 5:
Modes opératoires pour mesurer la conductivité a long terme des agents de
soutenement (ISO 13503-5:2006)
Ta slovenski standard je istoveten z: EN ISO 13503-5:2006
ICS:
75.100 Maziva Lubricants, industrial oils and
related products
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13503-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2006
ICS 75.100
English Version
Petroleum and natural gas industries - Completion fluids and
materials - Part 5: Procedures for measuring the long-term
conductivity of proppants (ISO 13503-5:2006)
Industries du pétrole et du gaz naturel - Fluides de Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten
complétion et matériaux - Partie 5: Modes opératoires pour und Materialien - Teil 5: Verfahren zur Messung der
mesurer la conductivité à long terme des agents de Langzeitleitfähigkeit von Stützmaterialien (ISO 13503-
soutènement (ISO 13503-5:2006) 5:2006)
This European Standard was approved by CEN on 24 May 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13503-5:2006: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 13503-5:2006) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2007, and conflicting national
standards shall be withdrawn at the latest by January 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 13503-5:2006 has been approved by CEN as EN ISO 13503-5:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13503-5
First edition
2006-07-01
Petroleum and natural gas industries —
Completion fluids and materials —
Part 5:
Procedures for measuring the long-term
conductivity of proppants
Industries du pétrole et du gaz naturel — Fluides de complétion et
matériaux —
Partie 5: Modes opératoires pour mesurer la conductivité à long terme
des agents de soutènement
Reference number
ISO 13503-5:2006(E)
©
ISO 2006
ISO 13503-5:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 13503-5:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative reference . 1
3 Terms and definitions. 1
4 Abbreviations . 2
5 Procedures for evaluating long-term proppant pack conductivity . 2
5.1 Objective. 2
5.2 Discussion. 2
6 Reagents and materials . 3
6.1 Test fluid . 3
6.2 Sandstone. 3
7 Long-term conductivity test apparatus . 3
7.1 Test unit . 3
7.2 Hydraulic load frame . 3
7.3 Pack width measurement device(s). 3
7.4 Test fluid drive system. 3
7.5 Differential pressure transducers . 4
7.6 Back-pressure regulators . 4
7.7 Balance . 4
7.8 Oxygen removal. 4
7.9 Temperature control. 4
7.10 Silica saturation and monitoring. 5
8 Equipment calibration . 5
8.1 Pressure indicators and flow rates. 5
8.2 Zero pack width measurement . 5
8.3 Determination of cell width. 6
8.4 Hydraulic load frame . 6
9 Leak tests . 6
9.1 Hydraulic load frame . 6
9.2 Test fluid system. 6
10 Procedure for loading the cells . 6
10.1 Preparation of the test unit . 6
10.2 Cell setup. 7
11 Loading cell(s) in the press . 9
12 Acquiring data. 9
13 Calculation of permeability and conductivity . 10
14 Data reporting . 11
Annex A (informative) Conversion factors . 12
Annex B (normative) Silica-saturation vessel setup . 13
Annex C (informative) Figures .15
Bibliography . 24
ISO 13503-5:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13503-5 was prepared by Technical Committee ISO/TC 67, Materials. equipment and offshore structures
for petroleum, petrochemical and natural gas industries, Subcommittee SC 3, Drilling and completion fluids,
and well cements.
ISO 13503 consists of the following parts, under the general title Petroleum and natural gas industries —
...
SLOVENSKI STANDARD
01-januar-2007
,QGXVWULMD]DSUHGHODYRQDIWHLQ]HPHOMVNHJDSOLQD7HNRþLQHLQPDWHULDOL]D
]DNOMXþQDGHODGHO3RVWRSNL]DPHUMHQMHGROJRURþQHSUHYRGQRVWLSRGSRUQLK
PDWHULDORY,62
Petroleum and natural gas industries - Completion fluids and materials - Part 5:
Procedures for measuring the long-term conductivity of proppants (ISO 13503-5:2006)
Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten und Materialien - Teil 5:
Verfahren zur Messung der Langzeitleitfähigkeit von Stützmaterialien (ISO 13503-
5:2006)
Industries du pétrole et du gaz naturel - Fluides de complétion et matériaux - Partie 5:
Modes opératoires pour mesurer la conductivité a long terme des agents de
soutenement (ISO 13503-5:2006)
Ta slovenski standard je istoveten z: EN ISO 13503-5:2006
ICS:
75.180.30 Oprema za merjenje Volumetric equipment and
prostornine in merjenje measurements
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN ISO 13503-5
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2006
ICS 75.100
English Version
Petroleum and natural gas industries - Completion fluids and
materials - Part 5: Procedures for measuring the long-term
conductivity of proppants (ISO 13503-5:2006)
Industries du pétrole et du gaz naturel - Fluides de Erdöl- und Erdgasindustrie - Komplettierungsflüssigkeiten
complétion et matériaux - Partie 5: Modes opératoires pour und Materialien - Teil 5: Verfahren zur Messung der
mesurer la conductivité à long terme des agents de Langzeitleitfähigkeit von Stützmaterialien (ISO 13503-
soutènement (ISO 13503-5:2006) 5:2006)
This European Standard was approved by CEN on 24 May 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13503-5:2006: E
worldwide for CEN national Members.
Foreword
This document (EN ISO 13503-5:2006) has been prepared by Technical Committee ISO/TC 67
"Materials, equipment and offshore structures for petroleum and natural gas industries" in
collaboration with Technical Committee CEN/TC 12 "Materials, equipment and offshore
structures for petroleum, petrochemical and natural gas industries", the secretariat of which is
held by AFNOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by January 2007, and conflicting national
standards shall be withdrawn at the latest by January 2007.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 13503-5:2006 has been approved by CEN as EN ISO 13503-5:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13503-5
First edition
2006-07-01
Petroleum and natural gas industries —
Completion fluids and materials —
Part 5:
Procedures for measuring the long-term
conductivity of proppants
Industries du pétrole et du gaz naturel — Fluides de complétion et
matériaux —
Partie 5: Modes opératoires pour mesurer la conductivité à long terme
des agents de soutènement
Reference number
ISO 13503-5:2006(E)
©
ISO 2006
ISO 13503-5:2006(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.
© ISO 2006
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail copyright@iso.org
Web www.iso.org
Published in Switzerland
ii © ISO 2006 – All rights reserved
ISO 13503-5:2006(E)
Contents Page
Foreword. iv
Introduction . v
1 Scope . 1
2 Normative reference . 1
3 Terms and definitions. 1
4 Abbreviations . 2
5 Procedures for evaluating long-term proppant pack conductivity . 2
5.1 Objective. 2
5.2 Discussion. 2
6 Reagents and materials . 3
6.1 Test fluid . 3
6.2 Sandstone. 3
7 Long-term conductivity test apparatus . 3
7.1 Test unit . 3
7.2 Hydraulic load frame . 3
7.3 Pack width measurement device(s). 3
7.4 Test fluid drive system. 3
7.5 Differential pressure transducers . 4
7.6 Back-pressure regulators . 4
7.7 Balance . 4
7.8 Oxygen removal. 4
7.9 Temperature control. 4
7.10 Silica saturation and monitoring. 5
8 Equipment calibration . 5
8.1 Pressure indicators and flow rates. 5
8.2 Zero pack width measurement . 5
8.3 Determination of cell width. 6
8.4 Hydraulic load frame . 6
9 Leak tests . 6
9.1 Hydraulic load frame . 6
9.2 Test fluid system. 6
10 Procedure for loading the cells . 6
10.1 Preparation of the test unit . 6
10.2 Cell setup. 7
11 Loading cell(s) in the press . 9
12 Acquiring data. 9
13 Calculation of permeability and conductivity . 10
14 Data reporting . 11
Annex A (informative) Conversion factors . 12
Annex B (normative) Silica-saturation vessel setup . 13
Annex C (informative) Figures .15
Bibliography . 24
ISO 13503-5:2006(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International organizations, governmental and
non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely with the
International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
International Standards are drafted in accordance with the rules given in the ISO/IEC Directives, Part 2.
The main task of technical committees is to prepare International Standards. Draft International Standards
adopted by the technical committees are circulated to the member bodies for voting. Publication as an
International Standard requires approval by at least 75 % of the member bodies casting a vote.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights.
ISO 13503-5 was prepared by Technical Committee ISO/TC 67, Materials. equipment and offshore structures
for petroleum, petrochemical and natural gas industries, Subcommittee SC 3, Drilling and completion fluids,
and well cements.
ISO 13503 consists of the following parts, under the general title Petroleum and natural gas industries —
Completion fluids and materials:
⎯ Part 1: Measureme
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.