EN 3-8:2006
(Main)Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 bar
This European Standard specifies the rules of design, type testing, fabrication and inspection control of portable fire extinguishers manufactured with metallic bodies as far as pressure risk is concerned.
This part applies to portable fire extinguishers of which the maximum allowable pressure PS is lower than or equal to 30 bar and containing non-explosive, non-flammable, non-toxic and non-oxidising fluids.
This European Standard also applies to the metallic gas cartridge of a volume less than 0,12 l (see Annex E) and gives guidance for sound engineering practice for metallic gas cartridges equal to or greater than 0,12 l and less than 0,5 l, see Annex F.
This European Standard does not apply to carbon dioxide fire extinguishers.
NOTE Annex A gives the classification of the different parts forming the portable fire extinguisher.
Tragbare Feuerlöscher - Teil 8: Zusätzliche Anforderungen zu EN 3-7 an die konstruktive Ausführung, Druckfestigkeit, mechanische Prüfungen für tragbare Feuerlöscher mit einem maximal zulässigen Druck kleiner gleich 30 bar
Diese Europäische Norm legt Regeln zur Bemessung, Typprüfung, Herstellung und Inspektionskontrolle
tragbarer Feuerlöscher mit Metallgehäusen fest, soweit die Gefährdung durch Druck betrachtet wird.
Der vorliegende Teil gilt für tragbare Feuerlöscher, bei denen der zulässige Höchstdruck PS kleiner als oder
gleich 30 bar ist, und die nicht explosive, nicht entzündbare, nicht toxische und nicht oxydierende Flüssigkeiten
enthalten.
Diese Europäische Norm gilt auch für Gasbehälter aus Metall mit einem Volumen kleiner 0,12 l, siehe
Anhang E und sie enthält eine Anleitung zur Herstellung von Gasbehältern aus Metall gleich oder größer
0,12 l und kleiner als 0,5 l entsprechend guter Ingenieurspraxis, siehe Anhang F.
Diese Europäische Norm gilt nicht für Kohlendioxid-Feuerlöscher.
ANMERKUNG Anhang A enthält die Klassifizierung unterschiedlicher Teile, die den tragbaren Feuerlöscher bilden.
Extincteurs d'incendie portatifs - Partie 8: Exigences additionnelles à l'EN 3-7 pour la construction, la résistance à la pression et les essais mécaniques pour extincteurs dont la pression maximale admissible est inférieure ou égale à 30 bar
La présente Norme européenne définit les règles de conception, d'essai de type, de fabrication et d’inspection des
extincteurs d’incendie portatifs dont le corps est en métal, en ce qui concerne les risques liés à la pression.
La présente partie s'applique aux extincteurs d’incendie portatifs dont la pression maximale admissible PS est
inférieure ou égale à 30 bar et renfermant des fluides inexplosibles, ininflammables, non toxiques et non oxydants.
La présente Norme européenne s'applique également aux cartouches de gaz métalliques dont le volume est
inférieur à 0,12 l, voir l’Annexe E, et donne des lignes directrices relatives aux règles de l’art applicables aux
cartouches de gaz métalliques de volume supérieur ou égal à 0,12 l et inférieur à 0,5 l, voir l’Annexe F.
La présente Norme européenne ne s'applique pas aux extincteurs à dioxyde de carbone.
NOTE 1 L'Annexe A donne la classification des différentes parties constitutives d'un extincteur d’incendie portatif.
Prenosni gasilniki - 8. del: Dodatne zahteve k EN 3-7 za konstrukcijo, odpornost proti tlaku in mehanski preskusi za gasilnike z največjim dovoljenim tlakom, enakim ali nižjim od 30 bar
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Portable fire extinguishers - Part 8: Additional requirements to EN 3-7 for the construction, resistance to pressure and mechanical tests for extinguishers with a maximum allowable pressure equal to or lower than 30 barExtincteurs d'incendie portatifs - Partie 8: Exigences additionnelles a l'EN 3-7 pour la construction, la résistance a la pression et les essais mécaniques pour extincteurs dont la pression maximale admissible est inférieure ou égale a 30 barTragbare Feuerlöscher - Teil 8: Zusätzliche Anforderungen zu EN 3-7 an die konstruktive Ausführung, Druckfestigkeit, mechanische Prüfungen für tragbare Feuerlöscher mit einem maximal zulässigen Druck kleiner gleich 30 barTa slovenski standard je istoveten z:EN 3-8:2006SIST EN 3-8:2007en13.220.10Gašenje požaraFire-fightingICS:SLOVENSKI
STANDARDSIST EN 3-8:200701-marec-2007
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 3-8December 2006ICS 13.220.10 English VersionPortable fire extinguishers - Part 8: Additional requirements toEN 3-7 for the construction, resistance to pressure andmechanical tests for extinguishers with a maximum allowablepressure equal to or lower than 30 barExtincteurs d'incendie portatifs - Partie 8: Exigencesadditionnelles à l'EN 3-7 pour la construction, la résistanceà la pression et les essais mécaniques pour extincteursdont la pression maximale admissible est inférieure ouégale à 30 barTragbare Feuerlöscher - Teil 8: Zusätzliche Anforderungenzu EN 3-7 an die konstruktive Ausführung, Druckfestigkeit,mechanische Prüfungen für tragbare Feuerlöscher miteinem maximal zulässigen Druck kleiner gleich 30 barThis European Standard was approved by CEN on 2 November 2006.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Central Secretariat or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2006 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 3-8:2006: E
Classification of the different parts of an extinguisher subject to internal pressure.17 Annex B (normative)
Pressures.18 Annex C (normative)
Impact test.19 C.1 Resistance to impact by falling weight).19 Annex D (normative)
Specification for plastics components
(except hoses, pistols and nozzles).20 D.1 General.20 D.2 Requirements for plastics components subject to pressure.20 Annex E (normative)
Propellant gas cartridges volume less than 0,12 l.24 E.1 Refillable cartridge.24 E.2 Non-refillable cartridges.25 E.3 Marking.25 Annex F (informative)
Propellant gas cartridges volume equal to or greater than 0,12 l but less than 0,5 l.26 F.1 Construction.26 F.2 Pressure test.26 F.3 Marking.26
Overfill pressure test.28 Annex ZA (informative)
Relationship between this European Standard and the Essential Requirements of EU Directive 97/23/EC.29
Figure 1 — Crushing test for long bodies.10 Figure 2 — Crushing test for short bodies.11 Table 1 — Number of bodies to be sampled.15 Table 2 — Batch sampling plan following failure.16 Table A.1 — Classification.17 Figure B.1 — Scheme of pressure.18 Table D.1 — Drop height for hammer test.22 Figure D.1 — Example of thread profile.23 Table ZA.1 — Correspondence between this European Standard and Directive 97/23/EC.29
conformity of a portable fire extinguisher to EN 3 part 7 According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
1) Withdrawn and replaced by EN 3-7. 2) EN 3-8 and 3-9 update and amend EN 3-3. On publication of these EN 3-3 will be withdrawn. 3) In preparation. EN 3-10 updates and amends EN 3-6. On publication of EN 3-10 EN 3-6 will be withdrawn.
Annex A gives the classification of the different parts forming the portable fire extinguisher. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refere
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.