CEN/TS 17021:2017
(Main)Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
Stationary source emissions - Determination of the mass concentration of sulphur dioxide by instrumental techniques
This Technical Specification describes a method for sampling and determining the concentration of gaseous sulphur dioxide (SO2) emissions from stacks. This method is based on instrumental techniques. It is applicable to both periodic measurements and the calibration of automated measuring systems permanently installed on stacks, for regulatory or other purposes.
Emissionen aus stationären Quellen - Ermittlung der Massenkonzentration von Schwefeldioxid mit instrumentellen Verfahren
Diese Technische Spezifikation beschreibt ein Verfahren zur Probenahme und Bestimmung der Konzentration von gasförmigem Schwefeldioxid (SO2) in Emissionen aus Abgaskanälen. Dieses Verfahren liegt den Techniken instrumenteller Analytik zugrunde. Es ist anwendbar bei wiederkehrenden Messungen und bei der Kalibrierung von automatischen Messeinrichtungen (AMS), die aus gesetzgeberischen oder anderen Gründen stationär an einem Abgaskanal installiert sind.
Émissions de sources fixes - Détermination de la concentration massique en dioxyde de soufre par des techniques instrumentales
La présente Spécification technique décrit une méthode de prélèvement et de détermination de la concentration des émissions de dioxyde de soufre gazeux (SO2) des cheminées. Cette méthode s’appuie sur des techniques instrumentales. Elle est applicable tant aux mesurages périodiques qu’à l’étalonnage des systèmes de mesurage automatisés installés à demeure sur des cheminées, à des fins réglementaires ou autres.
Emisije nepremičnih virov - Določevanje masne koncentracije žveplovega dioksida z instrumentalnimi tehnikami
Ta tehnična specifikacija opisuje metodo vzorčenja in določevanja koncentracije emisij plinastega žveplovega dioksida (SO2) iz odvodnikov. Ta metoda temelji na instrumentalnih tehnikah. Uporablja se za redno spremljanje in kalibracijo avtomatskih merilnih sistemov, ki so trajno nameščeni na odvodnike, in sicer za regulativne ter druge namene.
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 17021:2017
01-julij-2017
(PLVLMHQHSUHPLþQLKYLURY'RORþHYDQMHPDVQHNRQFHQWUDFLMHåYHSORYHJDGLRNVLGD
]LQVWUXPHQWDOQLPLWHKQLNDPL
Stationary source emissions - Determination of the mass concentration of sulphur
dioxide by instrumental techniques
Emissionen aus stationären Quellen - Ermittlung der Massenkonzentration von
Schwefeldioxid mit instrumentellen Verfahren
Émissions de sources fixes - Mesurage des émissions de dioxyde de soufre par des
techniques instrumentales
Ta slovenski standard je istoveten z: CEN/TS 17021:2017
ICS:
13.040.40 (PLVLMHQHSUHPLþQLKYLURY Stationary source emissions
SIST-TS CEN/TS 17021:2017 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 17021:2017
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 17021:2017
CEN/TS 17021
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
January 2017
TECHNISCHE SPEZIFIKATION
ICS 13.040.40
English Version
Stationary source emissions - Determination of the mass
concentration of sulphur dioxide by instrumental
techniques
Émissions de sources fixes - Détermination de la Emissionen aus stationären Quellen - Ermittlung der
concentration massique en dioxyde de soufre par des Massenkonzentration von Schwefeldioxid mit
techniques instrumentales instrumentellen Verfahren
This Technical Specification (CEN/TS) was approved by CEN on 23 October 2016 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2017 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 17021:2017 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 17021:2017
CEN/TS 17021:2017 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Symbols and abbreviations . 11
4.1 Symbols . 11
4.2 Abbreviated terms . 12
5 Principle . 12
5.1 General . 12
5.2 Measuring principle . 12
6 Description of the measuring system . 13
6.1 General .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.