EN ISO 11403-2:2004

Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2004)

ISO 11403-2:2004 specifies test procedures for the acquisition and presentation of multipoint data on the following thermal and processing properties of plastics:
enthalpy/temperature curve;
linear-expansion/temperature curve;
melt shear viscosity.

Kunststoffe - Ermittlung und Darstellung von vergleichbaren Vielpunktkennwerten - Teil 2: Thermische und Verarbeitungseigenschaften (ISO 11403-2:2004)

Dieser Teil der ISO 11403 legt Prüfverfahren für die Ermittlung und Darstellung von Vielpunktkennwerten für folgende thermische und Verarbeitungseigenschaften von Kunststoffen fest:
- Enthalpie-Temperatur-Diagramm;
- Längenausdehnung-Temperatur-Diagramm;
Schmelz-Scherviskosität.

Plastiques - Acquisition et présentation de données multiples comparables - Partie 2: Propriétés thermiques et caractéristiques relatives à la mise en oeuvre (ISO 11403-2:2004)

L'ISO 11403-2:2004 spécifie des modes opératoires d'essais en vue de l'acquisition et de la présentation des données multiples afférentes aux propriétés thermiques suivantes des plastiques et aux caractéristiques suivantes relatives à leur mise en oeuvre:
courbe enthalpie/température;
courbe dilatation linéique/température;
viscosité en cisaillement du matériau fondu.

Polimerni materiali - Pridobitev in predstavitev primerljivih podatkov, dobljenih v različnih razmerah - 2. del: Toplotne lastnosti in predelavne lastnosti (ISO 11403-2:2004)

General Information

• Status: Withdrawn
• Publication Date: 14-Mar-2004
• Withdrawal Date: 14-Sep-2012
• ICS: 83.080.01 - Plastics in general
• Technical Committee: CEN/TC 249 - Plastics
• Drafting Committee: CEN/TC 249 - Plastics
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Sep-2012
• Completion Date: 15-Sep-2012
• Ref Project: SIST EN ISO 11403-2:2004 - Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2004)

Relations

• Replaces: EN ISO 11403-2:1999 - Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:1995)
• Effective Date: 22-Dec-2008
• Replaced By: EN ISO 11403-2:2012 - Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal and processing properties (ISO 11403-2:2012)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 11403-2:2004
01-oktober-2004
1DGRPHãþD
SIST EN ISO 11403-2:2000
3ROLPHUQLPDWHULDOL3ULGRELWHYLQSUHGVWDYLWHYSULPHUOMLYLKSRGDWNRYGREOMHQLKY
UD]OLþQLKUD]PHUDKGHO7RSORWQHODVWQRVWLLQSUHGHODYQHODVWQRVWL,62

Plastics - Acquisition and presentation of comparable multipoint data - Part 2: Thermal
and processing properties (ISO 11403-2:2004)
Kunststoffe - Ermittlung und Darstellung von vergleichbaren Vielpunktkennwerten - Teil
2: Thermische und Verarbeitungseigenschaften (ISO 11403-2:2004)
Plastiques - Acquisition et présentation de données multiples comparables - Partie 2:
Propriétés thermiques et caractéristiques relatives a la mise en oeuvre (ISO 11403-
2:2004)
Ta slovenski standard je istoveten z: EN ISO 11403-2:2004
ICS:
83.080.01 Polimerni materiali na Plastics in general
splošno
SIST EN ISO 11403-2:2004 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 11403-2:2004

---------------------- Page: 2 ----------------------

SIST EN ISO 11403-2:2004
EUROPEAN STANDARD
EN ISO 11403-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2004
ICS 83.080.01 Supersedes EN ISO 11403-2:1999
English version
Plastics - Acquisition and presentation of comparable multipoint
data - Part 2: Thermal and processing properties (ISO 11403-
2:2004)
Plastiques - Acquisition et présentation de données Kunststoffe - Ermittlung und Darstellung von
multiples comparables - Partie 2: Propriétés thermiques et vergleichbaren Vielpunktkennwerten - Teil 2: Thermische
caractéristiques relatives à la mise en oeuvre (ISO 11403- und Verarbeitungseigenschaften (ISO 11403-2:2004)
2:2004)
This European Standard was approved by CEN on 1 March 2004.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 11403-2:2004 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN ISO 11403-2:2004
EN ISO 11403-2:2004 (E)
Foreword
This document (EN ISO 11403-2:2004) has been prepared by Technical Committee ISO/TC 61
"Plastics" in collaboration with Technical Committee CEN/TC 249 "Plastics", the secretariat of
which is held by IBN.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by September 2004, and conflicting national
standards shall be withdrawn at the latest by September 2004.
This document supersedes EN ISO 11403-2:1999.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Endorsement notice
The text of ISO 11403-2:2004 has been approved by CEN as EN ISO 11403-2:2004 without any
modifications.
2

---------------------- Page: 4 ----------------------

SIST EN ISO 11403-2:2004


INTERNATIONAL ISO
STANDARD 11403-2
Second edition
2004-03-15


Plastics — Acquisition and presentation
of comparable multipoint data —
Part 2:
Thermal and processing properties
Plastiques — Acquisition et présentation de données multiples
comparables —
Partie 2: Propriétés thermiques et caractéristiques relatives à la mise en
œuvre




Reference number
ISO 11403-2:2004(E)
©
ISO 2004

---------------------- Page: 5 ----------------------

SIST EN ISO 11403-2:2004
ISO 11403-2:2004(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file m
...