iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

FprEN ISO 16000-11

(Main)

Indoor air - Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO/FDIS 16000-11:2023)

Indoor air - Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO/FDIS 16000-11:2023)

Innenraumluftverunreinigungen - Teil 11: Bestimmung der Emission von flüchtigen organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen - Probenahme, Lagerung der Proben und Vorbereitung der Prüfstücke (ISO/FDIS 16000-11:2023)

Emissionsuntersuchungen von flüchtigen organischen Verbindungen aus ungenutzten Bauprodukten oder Einrichtungsgegenständen in Prüfkammern oder Prüfzellen setzen eine sorgfältige Behandlung der Prüfstücke vor und während der Prüfung voraus.
In diesem Dokument werden drei Typen von Bauprodukten oder Einrichtungsgegenständen definiert: feste, flüssige und kombinierte. Für jeden Produkttyp werden Angaben zu den Probenahmeverfahren, den Transportbedingungen, der Lagerung und den eingesetzten Trägermaterialien, die die Emissionen der flüchtigen organischen Verbindungen beeinflussen können, gemacht. Für einzelne Produkte wird die Vorbereitung des Prüfstücks für jeden Produkttyp beschrieben.
ANMERKUNG   In Abhängigkeit von der Inhomogenität des Produktes können Messungen an verschiedenen Prüfstücken notwendig sein, um die spezifische Emissionsrate zu bestimmen.

Air intérieur - Partie 11: Dosage de l'émission de composés organiques volatils de produits de construction et d'objets d'équipement - Échantillonnage, conservation des échantillons et préparation d'échantillons pour essai (ISO/FDIS 16000-11:2023)

Notranji zrak - 11. del: Določevanje emisije hlapnih organskih spojin iz vzorcev gradbenih proizvodov in opreme - Vzorčenje, shranjevanje vzorcev in priprava preskusnih vzorcev (ISO/FDIS 16000-11:2023)

General Information

Status
Not Published
Publication Date
14-May-2024
ICS
13.040.20 - Ambient atmospheres
13.040.99 - Other standards related to air quality
Technical Committee
CEN/TC 264 - Air quality
Drafting Committee
CEN/TC 264 - Air quality
Current Stage
6055 - CEN Ratification completed (DOR) - Publishing
Start Date
15-Mar-2024
Completion Date
15-Mar-2024
Ref Project
kSIST FprEN ISO 16000-11:2024 - Indoor air - Part 11: Determination of the emission of volatile organic compounds from samples of building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO/FDIS 16000-11:2023)

Relations

Revises
EN ISO 16000-11:2006 - Indoor air - Part 11: Determination of the emission of volatile organic compounds from building products and furnishing - Sampling, storage of samples and preparation of test specimens (ISO 16000-11:2006)
Effective Date
18-Jan-2023

Buy Standard

prEN ISO 16000-11:2023prEN ISO 16000-11:2023
PreviousNext
Draft
prEN ISO 16000-11:2023
English language
20 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN ISO 16000-11:2023
01-maj-2023
Notranji zrak - 11. del: Določevanje emisije hlapnih organskih spojin iz gradbenih
proizvodov in opreme - Vzorčenje, shranjevanje vzorcev in priprava preskusnih
vzorcev (ISO/DIS 16000-11:2023)
Indoor air - Part 11: Determination of the emission of volatile organic compounds from
building products and furnishing - Sampling, storage of samples and preparation of test
specimens (ISO/DIS 16000-11:2023)
Innenraumluftverunreinigungen - Teil 11: Bestimmung der Emission von flüchtigen
organischen Verbindungen aus Bauprodukten und Einrichtungsgegenständen -
Probenahme, Lagerung der Proben und Vorbereitung der Prüfstücke (ISO/DIS 16000-
11:2023)
Air intérieur - Partie 11: Dosage de l'émission de composés organiques volatils de
produits de construction et d'objets d'équipement - Échantillonnage, conservation des
échantillons et préparation d'échantillons pour essai (ISO/DIS 16000-11:2023)
Ta slovenski standard je istoveten z: prEN ISO 16000-11
ICS:
13.040.20 Kakovost okoljskega zraka Ambient atmospheres
oSIST prEN ISO 16000-11:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN ISO 16000-11:2023

---------------------- Page: 2 ----------------------
oSIST prEN ISO 16000-11:2023
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16000-11
ISO/TC 146/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:
2023-03-22 2023-06-14
Indoor air —
Part 11:
Determination of the emission of volatile organic
compounds from building products and furnishing —
Sampling, storage of samples and preparation of test
specimens
ICS: 13.040.20
This document is circulated as received from the committee secretariat.
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
NOT BE REFERRED TO AS AN INTERNATIONAL
STANDARD UNTIL PUBLISHED AS SUCH.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
Reference number
NATIONAL REGULATIONS.
ISO/DIS 16000-11:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 3 ----------------------
oSIST prEN ISO 16000-11:2023
ISO/DIS 16000-11:2023(E)
DRAFT INTERNATIONAL STANDARD
ISO/DIS 16000-11
ISO/TC 146/SC 6 Secretariat: DIN
Voting begins on: Voting terminates on:

Indoor air —
Part 11:
Determination of the emission of volatile organic
compounds from building products and furnishing —
Sampling, storage of samples and preparation of test
specimens
ICS: 13.040.20
This document is circulated as received from the committee secretariat.
COPYRIGHT PROTECTED DOCUMENT
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENT AND APPROVAL. IT IS
© ISO 2023
ISO/CEN PARALLEL PROCESSING
THEREFORE SUBJECT TO CHANGE AND MAY
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
NOT BE REFERRED TO AS AN INTERNATIONAL
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on STANDARD UNTIL PUBLISHED AS SUCH.
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
IN ADDITION TO THEIR EVALUATION AS
or ISO’s member body in the country of the requester. BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
ISO copyright office
USER PURPOSES, DRAFT INTERNATIONAL
CP 401 • Ch. de Blandonnet 8
STANDARDS MAY ON OCCASION HAVE TO
BE CONSIDERED IN THE LIGHT OF THEIR
CH-1214 Vernier, Geneva
POTENTIAL TO BECOME STANDARDS TO
Phone: +41 22 749 01 11
WHICH REFERENCE MAY BE MADE IN
Reference number
Email: copyright@iso.org
NATIONAL REGULATIONS.
Website: www.iso.org ISO/DIS 16000-11:2023(E)
RECIPIENTS OF THIS DRAFT ARE INVITED
Published in Switzerland
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
ii
  © ISO 2023 – All rights reserved
PROVIDE SUPPORTING DOCUMENTATION. © ISO 2023

---------------------- Page: 4 ----------------------
oSIST prEN ISO 16000-11:2023
ISO/DIS 16000-11:2023(E)
Contents Page
Foreword .iv
Introduction .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 747-1:2024(Main)
Furniture - Bunk beds and high beds - Part 1: Safety, strength and durability requirements
kSIST FprEN 747-1:2023

This document specifies requirements for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
It is applicable to bunk beds and high beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm, and with the upper surface of a bed base of 600 mm or more above the floor.
This document does not apply to bunk beds and high beds used for special purposes, including but not limited to prisons, the military and fire brigades.
If other products are included in a bunk bed/high bed, for example a table or storage furniture, the relevant European Standards could, in addition, apply.
The document contains one annex:
-   Annex A (informative) - Rationales.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 45545-3:2024(Main)
Railway applications - Fire protection on railway vehicles - Part 3: Fire resistance requirements for fire barriers
kSIST FprEN 45545-3:2023

This document specifies the fire resistance requirements and testing methods for fire barriers for railway vehicles.
The objective of the measures and requirements, specified in this document, is to protect passengers and staff in railway vehicles in the event of a developing fire on board.
Use of a Fire Containment and Control System, where permitted as an alternative to a fire barrier, is not in the scope of this document. It is not within the scope of this document to describe measures that ensure the preservation of the railway vehicles in the event of a fire.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 15610:2024(Main)
Specification and qualification of welding procedures for metallic materials - Qualification based on tested welding consumables (ISO 15610:2024)
oSIST prEN ISO 15610:2023

This document specifies how a welding procedure can be qualified by using tested welding consumable data. It expands on the requirements given in ISO 15607.
In addition, it gives the range of qualification.
Application of this document is limited to parent material groups 1.1, 8.1, 21, 22.1 and 22.2 in accordance with ISO/TR 15608, which produce acceptable microstructures and properties in the heat-affected zone which do not deteriorate significantly in service.
This document is limited to:
—     butt welds and fillet welds in material of thicknesses t ≤ 40 mm (groups 1.1 and 8.1) and t ≤ 20 mm (groups 21, 22.1 and 22.2);
—     fillet welds with throat thickness a ≥ 1 mm.
This document is not applicable when any of the following is specified for the welded joint:
a)       hardness;
b)       impact properties;
c)        preheating;
d)       controlled heat input;
e)       interpass temperature;
f)         post-weld heat treatment.
The use of this document can also be restricted by an application standard, specification or other documents.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17921:2024(Main)
Natural gas fuelling stations - LNG unloading connector
kSIST FprEN 17921:2023

This document specifies a harmonized unloading connector for LNG road tanker at LNG fuelling stations. This document is also applicable to LNG RID applications. While LNG is also transported by rail, European regulations are organized through the International Carriage of Dangerous Goods by Rail (RID). The same configuration as defined by this document, can be utilized. This document includes requirements for (at least):
-   functional description of the LNG unloading receptacle and LNG unloading nozzle;
-   technical layout description of the LNG unloading receptacle.
The technical layout description of the LNG unloading nozzle is not part of this document.
The basic functional requirement of the LNG unloading connector are as follows:
-   to prevent leakage of methane during operation and in particular during disconnecting;
-   easy handling, no spillage and purging with nitrogen during disconnecting.
The loading connector between the LNG road tanker and the LNG terminal is not covered by this document.
See Figure 1.

  • Draft
    19 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 3834-6:2024(Main)
Quality requirements for fusion welding of metallic materials - Part 6: Guidelines on implementing ISO 3834 series (ISO 3834-6:2024)
kSIST FprEN ISO 3834-6:2023

This document gives guidelines for the implementation of requirements given in the other parts of the ISO 3834 series. It is intended to help users select the appropriate part of the ISO 3834 series. It is expected that users will already be familiar with the ISO 3834 series as a whole.
This document does not provide additional requirements to those in ISO 3834-1 to ISO 3834-5.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 10251:2024(Main)
Magnetic materials - Methods of determination of the geometrical characteristics of electrical steel sheet and strip
kSIST FprEN 10251:2023

This European Standard is intended to define the test methods used for the determination of the following geometrical characteristics of electrical steel sheet and strip:
—   edge wave (wave factor);
—   residual curvature;
—   edge camber;
—   deviation from the shearing line due to internal stresses;
—   burr height of cut edges.
This European Standard applies to electrical steel sheet and strip intended for the construction of magnetic circuits and corresponding to Clauses B2, C21 and C22 of IEC 60404-1:2000.

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 2939:2024(Main)
Aerospace series - Screw, 100° countersunk head, offset cruciform recess, threaded to head, in heat resisting steel FE-PA92HT (A286) - Classification: 900 MPa (at ambient temperature)/650 °C
kSIST FprEN 2939:2023

This document specifies the characteristics of screws with 100° countersunk head, offset cruciform recess, threaded to head, in FE-PA92HT, for aerospace applications.
Classification: 900 MPa /650 °C .

  • Draft
    7 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17922:2024(Main)
Natural gas fuelling stations - LNG unloading stop system
kSIST FprEN 17922:2023

This document specifies the minimum safety interface requirement for the unloading stop system between the LNG road tanker and LNG fuelling station.
This document consists of two main topics:
-   functional description of the unloading stop system;
-   technical layout description of the unloading stop system.

  • Draft
    12 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12255-12:2024(Main)
Wastewater treatment plants - Part 12: Control and automation
kSIST FprEN 12255-12:2023

This document specifies general requirements for instrumentation and specific requirements for process control and automation systems on wastewater treatment plants for more than 50 PT.
NOTE 1   Because of the rapid rate of development of sensor and control equipment, this document is intended as an overview and uses examples and general requirements, not detailed equipment specifications. Detailed information additional to that contained in this document can be obtained by referring to the Bibliography.
NOTE 2   Although EC directives become matters of law in member states of the EU and some other situations, this standard is intended for wider use and hence those directives with clear technical guidance of a type that would generally be appropriate in a standard are referenced in the text and listed in the Bibliography. The alternative of listing requirements copied from directives would potentially create unacceptable conflict when directives are revised.

  • Draft
    25 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 747-2:2024(Main)
Furniture - Bunk beds and high beds - Part 2: Test methods
kSIST FprEN 747-2:2023

This document specifies test methods for the safety, strength and durability of bunk beds and high beds for domestic and non-domestic use.
The tests are applicable to beds with an internal length greater than 1 400 mm and a maximum bed base width of 1 200 mm and with the upper surface of a bed base 600 mm or more above the floor.
The tests are designed to be applied to a bed that is fully assembled and ready for use.
The applicable safety requirements are given in FprEN 747-1:2023.

  • Draft
    22 pages
    English language
    sale 10% off
    e-Library read for
    1 day