EN 13286-41:2003

Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures

This standard specifies a method for the determination of the compressive strength of test specimens of hydraulically bound mixtures. This standard applies to specimens made from either laboratory or production mixture with a maximum aggregate size of 31,5 mm.

Ungebundene und hydraulisch gebundene Gemische - Teil 41: Prüfverfahren zur Bestimmung der Druckfestigkeit hydraulisch gebundener Gemische

Diese Europäische Norm beschreibt ein Prüfverfahren zur Bestimmung der Druckfestigkeit von Probekörpern hydraulisch gebundener Gemische (HBM). Sie gilt sowohl für im Labor als auch für aus Bohrkernen hergestellte Probekörper.

Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 41: Méthode d'essai pour la détermination de la résistance à la compression des mélanges traités aux liants hydrauliques

La présente Norme européenne décrit une méthode d'essai pour la détermination de la résistance à la compression des éprouvettes  de matériaux traités aux liants hydrauliques. Cette Norme européenne s'applique aux éprouvettes confectionnées en laboratoire ou obtenues à partir de carottes.

Nevezane in hidravlično vezane zmesi – 41. del: Preskusna metoda za ugotavljanje tlačne trdnosti hidravlično vezanih zmesi

General Information

• Status: Withdrawn
• Publication Date: 04-Mar-2003
• Withdrawal Date: 13-Apr-2025
• ICS: 93.080.20 - Road construction materials
• Technical Committee: CEN/TC 227 - Road materials
• Drafting Committee: CEN/TC 227/WG 4 - Hydraulic bound and unbound mixtures (including byproducts and waste materials)
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 03-Nov-2021
• Completion Date: 14-Apr-2025
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Ref Project: SIST EN 13286-41:2004 - Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures

Relations

• Replaced By: EN 13286-41:2021 - Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the compressive strength of hydraulically bound mixtures
• Effective Date: 10-Nov-2021

Standards Content (Sample)

SLOVENSKI STANDARD
01-junij-2004
1HYH]DQHLQKLGUDYOLþQRYH]DQH]PHVL±GHO3UHVNXVQDPHWRGD]DXJRWDYOMDQMH
WODþQHWUGQRVWLKLGUDYOLþQRYH]DQLK]PHVL
Unbound and hydraulically bound mixtures - Part 41: Test method for the determination
of the compressive strength of hydraulically bound mixtures
Ungebundene und hydraulisch gebundene Gemische - Teil 41: Prüfverfahren zur
Bestimmung der Druckfestigkeit hydraulisch gebundener Gemische
Mélanges traités et mélanges non traités aux liants hydrauliques - Partie 41: Méthode
d'essai pour la détermination de la résistance a la compression des mélanges traités aux
liants hydrauliques
Ta slovenski standard je istoveten z: EN 13286-41:2003
ICS:
93.080.20 Materiali za gradnjo cest Road construction materials
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 13286-41
NORME EUROPÉENNE
EUROPÄISCHE NORM
March 2003
ICS 93.080.20
English version
Unbound and hydraulically bound mixtures - Part 41: Test
method for the determination of the compressive strength of
hydraulically bound mixtures
Mélanges traités et mélanges non traités aux liants Ungebundene und hydraulisch gebundene Gemische - Teil
hydrauliques - Partie 41: Méthode d'essai pour la 41: Prüfverfahren zur Bestimmung der Druckfestigkeit
détermination de la résistance à la compression des hydraulisch gebundener Gemische
mélanges traités aux liants hydrauliques
This European Standard was approved by CEN on 29 November 2002.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovak Republic, Spain, Sweden, Switzerland and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2003 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13286-41:2003 E
worldwide for CEN national Members.

Contents
page
Foreword.3
1 Scope .5
2 Normative references .5
3 Terms and definitions.5
4 Principle.5
5 Apparatus .6
6 Test specimen .6
7 Test procedure .6
7.1 Dimensions.6
7.2 Mass .6
7.3 Adjustment of the test specimen .6
7.4 Defective specimens .7
7.5 Specimen positioning.7
7.6 Loading .7
7.7 Assessment of type of failure.7
8 Expression of result .7
9 Test report .8
9.1 Compulsory information .8
9.2 Optional information.8
Foreword
This document (EN 13286-41:2003) has been prepared by Technical Committee CEN/TC 227 "Road materials",
the secretariat of which is held by DIN.
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by September 2003, and conflicting national standards shall be withdrawn at the
latest by December 2004.
This European Standard is one of a series of standards as listed below.
EN 13286-1, Unbound and hydraulically bound mixtures - Part 1: Test methods for laboratory reference density
and water content – Introduction, general requirements and sampling.
prEN 13286-2, Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density
and water content - Proctor compaction.
EN 13286-3, Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density
and water content - Vibrocompression with controlled parameters.
EN 13286-4, Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density
and water content - Vibrating hammer.
EN 13286-5, Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density
and water content - Vibrating table.
prEN 13286-7, Unbound and hydraulically bound mixtures - Part 7: Cyclic load triaxial test for unbound mixtures.
EN 13286-40, Unbound and hydraulically bound mixtures - Part 40: Test method for the determination of the direct
tensile strength of hydraulically bound mixtures.
EN 13286-41, Unbound and hydraulically bound mixtures - Part 41: Test method for the determination of the
compressive strength of hydraulically bound mixtures.
EN 13286-42, Unbound and hydraulically bound mixtures - Part 42: Test method for the determination of the
indirect tensile strength of hydraulically bound mixtures.
EN 13286-43, Unbound and hydraulically bound mixtures - Part 43: Test method for the determination of the
modulus of elasticity of hydraulically bound mixtures.
prEN 13286-44, Unbound and hydraulically bound mixtures - Part 44: Test method for the determination of the
alpha coefficient of vitrified blastfurnace slag.
prEN 13286-45, Unbound and hydraulically bound mixtures - Test methods - Part 45: Test method for the
determination of the workability period of hydraulically bound mixtures.
EN 13286-46, Unbound and hydraulically bound mixtures - Part 46: Test method for the determination of the
moisture condition value.
prEN 13286-47, Unbound and hydraulically bound mixtures - Part 47: Test methods for the determination of
California bearing ratio, immediate bearing index and linear swelling.
prEN 13286-48, Unbound and hydraulically bound mixtures - Part 48: Test method for the determination of the
degree of pulverisation.
prEN 13286-49, Unbound and hydraulically bound mixtures - Part 49: Test method for the determination of the
accelerated swelling of soil treated by lime and/or hydraulic binder.
prEN 13286-50, Unbound and hydraulically bound mixtures - Part 50: Method for the manufacture of test
specimens of hydraulically bound mixtures using Proctor equipment or vibrating table compaction.
prEN 13286-51, Unbound and hydraulically bound mixtures - Part 51: Method for the manufacture of test
specimens of hydraulically bound mixtures using vibrating hammer compaction.
prEN 13286-52, Unbound and hydraulically bound mixtures - Part 52: Method for the manufacture of test
specimens of hydraulically bound mixtures using vibrocompression.
prEN 13286-53, Unbound and hydraulically bound mixtures - Part 53: Method for the manufacture of test
specimens of hydraulically bound mixtures using axial compression.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
Slovak Republic, Spain, Sweden, Switzerland and the United Kingdom.
...