EN ISO 13445:2006

Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)

ISO 13445:2003 specifies a method for the determination of the shear strength of adhesives used to bond materials with elastic moduli higher than the elastic modulus of the adhesive. The method provides an estimate of the shear strength of an adhesive on various machinable and non-machinable substrate materials.

Klebstoffe - Bestimmung der Scherfestigkeit von Klebungen zwischen starren Werkstoffen nach dem Blockscherverfahren (ISO 13445:2003)

Diese Internationale Norm legt ein Verfahren für die Bestimmung der Scherfestigkeit von Klebstoffen fest, die
zum Kleben von Werkstoffen benutzt werden, deren Elastizitätsmoduln größer sind als der Elastizitätsmodul
des Klebstoffs. Dieses Verfahren erlaubt es, die Scherfestigkeit von Klebstoffen auf verschiedenen spanend
oder nur nichtspanend bearbeitbaren Werkstoffen zu erfassen.

Adhésifs - Détermination de la résistance au cisaillement de joints collés entre éléments rigides par la méthode de cisaillement entre blocs massifs (ISO 13445:2003)

L'ISO 13445:2003 spécifie une méthode de détermination de la résistance au cisaillement d'adhésifs utilisés pour coller des matériaux ayant un module d'élasticité supérieur à celui de l'adhésif. Cette méthode fournit une estimation de la résistance au cisaillement de l'adhésif sur différents matériaux usinables ou non.

Lepila – Ugotavljanje strižne trdnosti lepljenega spoja med togimi lepljenci z uporabo strižne metode (block-shear method) (ISO 13445:2003)

General Information

• Status: Published
• Publication Date: 20-Jun-2006
• Withdrawal Date: 20-Dec-2006
• ICS: 83.180 - Adhesives
• Technical Committee: CEN/TC 193 - Adhesives
• Drafting Committee: CEN/TC 193/WG 2 - Structural adhesives
• Current Stage: 6060 - Definitive text made available (DAV) - Publishing
• Start Date: 21-Jun-2006
• Due Date: 13-Sep-2007
• Completion Date: 21-Jun-2006
• Ref Project: SIST EN ISO 13445:2006 - Adhesives - Determination of shear strength of adhesive bonds between rigid substrates by the block-shear method (ISO 13445:2003)

Standards Content (Sample)

SLOVENSKI STANDARD
01-oktober-2006
Lepila – Ugotavljanje strižne trdnosti lepljenega spoja med togimi lepljenci z
uporabo strižne metode (block-shear method) (ISO 13445:2003)
Adhesives - Determination of shear strength of adhesive bonds between rigid substrates
by the block-shear method (ISO 13445:2003)
Klebstoffe - Bestimmung der Scherfestigkeit von Klebungen zwischen starren
Werkstoffen nach dem Blockscherverfahren (ISO 13445:2003)
Adhésifs - Détermination de la résistance au cisaillement de joints collés entre éléments
rigides par la méthode de cisaillement entre blocs massifs (ISO 13445:2003)
Ta slovenski standard je istoveten z: EN ISO 13445:2006
ICS:
83.180 Lepila Adhesives
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 13445
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2006
ICS 83.180
English Version
Adhesives - Determination of shear strength of adhesive bonds
between rigid substrates by the block-shear method (ISO
13445:2003)
Adhésifs - Détermination de la résistance au cisaillement Klebstoffe - Bestimmung der Scherfestigkeit von
de joints collés entre éléments rigides par la méthode de Klebungen zwischen starren Werkstoffen nach dem
cisaillement entre blocs massifs (ISO 13445:2003) Blockscherverfahren (ISO 13445:2003)
This European Standard was approved by CEN on 25 May 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 13445:2006: E
worldwide for CEN national Members.

Foreword
The text of ISO 13445:2003 has been prepared by Technical Committee ISO/TC 61 "Plastics” of
the International Organization for Standardization (ISO) and has been taken over as EN ISO
13445:2006 by Technical Committee CEN/TC 193 "Adhesives", the secretariat of which is held
by AENOR.
This European Standard shall be given the status of a national standard, either by publication of
an identical text or by endorsement, at the latest by December 2006, and conflicting national
standards shall be withdrawn at the latest by December 2006.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of
the following countries are bound to implement this European Standard: Austria, Belgium,
Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,
Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.

Endorsement notice
The text of ISO 13445:2003 has been approved by CEN as EN ISO 13445:2006 without any
modifications.
INTERNATIONAL ISO
STANDARD 13445
Second edition
2003-04-01
Adhesives — Determination of shear
strength of adhesive bonds between rigid
substrates by the block-shear method
Adhésifs — Détermination de la résistance au cisaillement de joints
collés entre éléments rigides par la méthode de cisaillement entre blocs
massifs
Reference number
ISO 13445:2003(E)
©
ISO 2003
ISO 13445:2003(E)
PDF disclaimer
This PDF file may contain embedded typefaces. In accordance with Adobe's licensing policy, this file may be printed or viewed but
shall not be edited unless the typefaces which are embedded are licensed to and installed on the computer performing the editing. In
downloading this file, parties accept therein the responsibility of not infringing Adobe's licensing policy. The ISO Central Secretariat
accepts no liability in this area.
Adobe is a trademark of Adobe Systems Incorporated.
Details of the software products used to create this PDF file can be found in the General Info relative to the file; the PDF-creation
parameters were optimized for printing. Every care has been taken to ensure that the file is suitable for use by ISO member bodies. In
the unlikely event that a problem relating to it is found, please inform the Central Secretariat at the address given below.

©  ISO 2003
All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means,
electronic or mechanical, including photocopying and microfilm, without permission in writing from either ISO at the address below or
ISO's member body in the country of the requester.
ISO copyright office
Case postale 56 • CH-1211 Geneva 20
Tel. + 41 22 749 01 11
Fax + 41 22 749 09 47
E-mail [e-mail]
Web www.iso.org
Published in Switzerland
ii © ISO 2003 — All rights reserved

ISO 13445:2003(E)
Contents Page
Foreword. iv
1 Scope. 1
2 Normative references . 1
3 Terms and definitions. 1
4 Principle . 2
5 Apparatus. 2
6 Test specimens . 3
7 Conditioning . 4
8 Procedure. 4
9 Expression of results. 4
10 Precision . 4
11 Test report. 4

ISO 13445:2003(E)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards bodies
(ISO member bodies). The work of preparing International Standards is normally carried out through ISO
technical committees. Each member body interested in a subject for which a technical committee has been
established has the right to be represented on that committee. International or
...