EN 12976-2:2006

Thermal solar systems and components - Factory made systems - Part 2: Test methods

This European Standard specifies test methods for validating the requirements for Factory Made Thermal Solar Heating Systems as specified in EN 12976-1. The standard also includes two test methods for thermal performance characterization by means of whole system testing.

Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 2: Prüfverfahren

Diese Europäische Norm legt Verfahren für die Prüfung der Erfüllung der Anforderungen für vorgefertigte thermische Solaranlagen fest, wie sie in prEN 12976-1 angegeben sind. Die Norm enthält auch zwei Prüfverfahren zur Charakterisierung der Wärmeleistung durch Prüfung der Gesamtanlage

Installations solaires thermiques et leurs composants - Installations préfabriquées en usine - Partie 2: Méthodes d'essai

La présente Norme européenne spécifie des méthodes d'essai permettant de valider les exigences applicables aux installations de chauffage solaire thermique préfabriquées en usine, telles que spécifiées dans le prEN 12976-1. La norme comprend également deux méthodes d'essai pour la caractérisation des performances thermiques à l'aide d'essais de l'installation dans son intégralité.

Toplotni sončni sistemi in sestavni deli - Industrijsko izdelani sistemi - 2. del: Preskusne metode

General Information

• Status: Withdrawn
• Publication Date: 24-Jan-2006
• Withdrawal Date: 24-Jan-2017
• ICS: 27.160 - Solar energy engineering
• Technical Committee: CEN/TC 312 - Thermal solar systems and components
• Drafting Committee: CEN/TC 312 - Thermal solar systems and components
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 25-Jan-2017
• Mandate: M/077 - Mandate to CEN/CENELEC on standards for thermal solar systems and components
• Ref Project: SIST EN 12976-2:2006 - Thermal solar systems and components - Factory made systems - Part 2: Test methods

Relations

• Replaces: EN 12976-2:2000 - Thermal solar systems and components - Factory made systems - Part 2: Test methods
• Effective Date: 22-Dec-2008
• Replaced By: EN 12976-2:2017 - Thermal solar systems and components - Factory made systems - Part 2: Test methods
• Effective Date: 20-Nov-2013
• Revised: prEN 12976-2 - Thermal solar systems and components - Factory made systems - Part 2: Test methods
• Effective Date: 19-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 12976-2:2006
01-maj-2006
1DGRPHãþD
SIST EN 12976-2:2002
7RSORWQLVRQþQLVLVWHPLLQVHVWDYQLGHOL,QGXVWULMVNRL]GHODQLVLVWHPLGHO
3UHVNXVQHPHWRGH
Thermal solar systems and components - Factory made systems - Part 2: Test methods
Thermische Solaranlagen und ihre Bauteile - Vorgefertigte Anlagen - Teil 2:
Prüfverfahren
Installations solaires thermiques et leurs composants - Installations préfabriquées en
usine - Partie 2: Méthodes d'essai
Ta slovenski standard je istoveten z: EN 12976-2:2006
ICS:
27.160 6RQþQDHQHUJLMD Solar energy engineering
SIST EN 12976-2:2006 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 12976-2:2006

---------------------- Page: 2 ----------------------

SIST EN 12976-2:2006
EUROPEAN STANDARD
EN 12976-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
January 2006
ICS 27.160 Supersedes EN 12976-2:2000
English Version
Thermal solar systems and components - Factory made
systems - Part 2: Test methods
Installations solaires thermiques et leurs composants - Thermische Solaranlagen und ihre Bauteile - Vorgefertigte
Installations préfabriquées en usine - Partie 2: Méthodes Anlagen - Teil 2: Prüfverfahren
d'essai
This European Standard was approved by CEN on 9 December 2005.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 12976-2:2006: E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------

SIST EN 12976-2:2006
EN 12976-2:2006 (E)
Contents Page
Foreword .4
Introduction.5
1 Scope .7
2 Normative references .7
3 Terms and definitions.7
4 Symbols and abbreviations.8
5 Testing .8
5.1 Freeze resistance.8
5.1.1 General .8
5.1.2 Systems using antifreeze fluid.8
5.1.3 Drain-back systems .9
5.1.4 Drain-down systems .9
5.1.5 Freeze protection and control functions combined .9
5.1.6 Other systems .9
5.2 Over temperature protection.
...