iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 13680:2001/AC:2007

(Corrigendum)

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000/Cor 1:2002 and Cor 2:2004)

Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000/Cor 1:2002 and Cor 2:2004)

ISO - Taking over of 2 ISO Technical Corrigenda

Erdöl- und Erdgasindustrie - Nahtlose Rohre aus korrosionsbeständigen Legierungen zur Verwendung als Futter- oder Steigrohre sowie Muffenvorrohre - Technische Lieferbedingungen (ISO 13680:2000/Cor 1:2002 and Cor 2:2004)

Industries du pétrole et du gaz naturel - Tubes sans soudure en acier allié résistant à la corrosion utilisés comme tubes de cuvelage, tubes de production et tubes-ébauches pour manchons - Conditions techniques de livraison (ISO 13680:2000/Cor 1:2002 et Cor 2:2004)

Industrija nafte in zemeljskega plina - Nevarjene cevi iz korozijsko odpornih zlitin, ki se uporabljajo kot zaščitne, proizvodne in priključne cevi - Tehnični dobavni pogoji (ISO 13680:2000/Cor 1:2002 in Cor 2:2004)

General Information

Status
Withdrawn
Publication Date
23-Oct-2007
Withdrawal Date
14-Oct-2008
ICS
75.180.10 - Exploratory, drilling and extraction equipment
77.140.75 - Steel pipes and tubes for specific use
Technical Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Drafting Committee
CEN/TC 12 - Materials, equipment and offshore structures for petroleum and natural gas industries
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
15-Oct-2008
Completion Date
15-Oct-2008
Ref Project
SIST EN ISO 13680:2004/AC:2008 - Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000/Cor 1:2002 and Cor 2:2004)

Relations

Replaced By
EN ISO 13680:2008 - Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2008)
Effective Date
12-Sep-2009
Corrects
EN ISO 13680:2001 - Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000)
Effective Date
08-Jun-2022

Buy Standard

EN ISO 13680:2004/AC:2008 - Cor. 1 v FR, Cor.2 v ENEN ISO 13680:2004/AC:2008 - Cor. 1 v FR, Cor.2 v EN
PreviousNext
Corrigendum
EN ISO 13680:2004/AC:2008 - Cor. 1 v FR, Cor.2 v EN
English and French language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubes for use as casing, tubing and coupling stock - Technical delivery conditions (ISO 13680:2000/Cor 1:2002 and Cor 2:2004)Industries du pétrole et du gaz naturel - Tubes sans soudure en acier allié résistant a la corrosion utilisés comme tubes de cuvelage, tubes de production et tubes-ébauches pour manchons - Conditions techniques de livraison (ISO 13680:2000/Cor 1:2002 et Cor 2:2004)Erdöl- und Erdgasindustrie - Nahtlose Rohre aus korrosionsbeständigen Legierungen zur Verwendung als Futter- oder Steigrohre sowie Muffenvorrohre - Technische Lieferbedingungen (ISO 13680:2000/Cor 1:2002 and Cor 2:2004)Ta slovenski standard je istoveten z:EN ISO 13680:2000/AC:2007SIST EN ISO 13680:2004/AC:2008en,fr77.140.7575.180.10ICS:SLOVENSKI
STANDARDSIST EN ISO 13680:2004/AC:200801-februar-2008

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN ISO 13680:2000/ACOctober 2007Octobre 2007Oktober 2007ICS 75.180.10; 77.140.75English versionVersion FrançaiseDeutsche FassungPetroleum and natural gas industries - Corrosion-resistant alloy seamlesstubes for use as casing, tubing and coupling stock - Technical deliveryconditions (ISO 13680:2000/Cor 1:2002 and Cor 2:2004)Industries du pétrole et du gaz naturel -Tubes sans soudure en acier allié résistantà la corrosion utilisés comme tubes decuvelage, tubes de production et tubes-ébauches pour manchons - Conditionstechniques de livraison (ISO13680:2000/Cor 1:2002 et Cor 2:2004)Erdöl- und Erdgasindustrie - NahtloseRohre aus korrosionsbeständigenLegierungen zur Verwendung als Futter-oder Steigrohre sowie Muffenvorrohre -Technische Lieferbedingungen (ISO13680:2000/Cor 1:2002 and Cor 2:2004)This corrigendum becomes effective on 24 October 2007 for incorporation in the three officiallanguage versions of the EN.Ce corrigendum prendra effet le 24 octobre 2007 pour incorporation dans les trois versionslinguistiques officielles de la EN.Die Berichtigung tritt am 24.Oktober 2007 zur Einarbeitung in die drei offiziellen Sprachfassungen derEN in Kraft.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reserved worldwide for CEN national Members.Tous droits d'exploitation sous quelque forme et de quelque manière que ce soit réservés dans le monde entier auxmembres nationaux du CEN.Alle Rechte der Verwertung, gleich in welcher Form und in welchem Verfahren, sind weltweit den nationalen Mitgliedernvon CEN vorbehalten.Ref. No.:EN ISO 13680:2000/AC:2007 D/E/F

EN ISO 13680:2000/AC:2007 (E/F/D) 2
English version
Endorsement Notice
The text of ISO 13680:2000/Cor.1:2002 and ISO 13680:2000/Cor.1:2004 has been approved by CEN as a European Corrigendum without any modifications.
Version française
Notice d’entérinement
Les textes de l'ISO 13680:2000/Cor.1:2002 et de l'ISO 13680:2000/Cor.1:2004 ont été approuvés par le CEN en tant que Corrigendum européen sans aucune modification.

ICS
75.180.10;
77.140.75 Réf. no ISO 13680:2000/Cor.1:2002(F)© ISO 2002 –
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 11960:2021(Main)
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
SIST EN ISO 11960:2021

This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material.
By agreement between the purchaser and manufacturer, this document can also be applied to other plain-end pipe sizes and wall thicknesses.
This document is applicable to the following connections:
—     short round thread casing (SC);
—     long round thread casing (LC);
—     buttress thread casing (BC);
—     non-upset tubing (NU);
—     external upset tubing (EU);
—     integral-joint tubing (IJ).
NOTE 1  For further information, see API Spec 5B.
For such connections, this document specifies the technical delivery conditions for couplings and thread protection.
NOTE 2  Supplementary requirements that can optionally be agreed for enhanced leak resistance connections (LC) are given in A.9 SR22.
This document can also be applied to tubulars with connections not covered by ISO or API standards.
This document is applicable to products including the following grades of pipe: H40, J55, K55, N80, L80, C90, R95, T95, P110, C110 and Q125.
This document is not applicable to threading requirements.
NOTE 3  Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as, instruments and methods for inspection of threads are given in API Spec 5B.

  • Standard
    281 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13680:2020(Main)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
SIST EN ISO 13680:2020

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:
—     PSL-1, which is the basis of this document;
—     PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
NOTE 1  The corrosion-resistant alloys included in this document are special alloys in accordance with ISO 4948-1 and ISO 4948-2.
NOTE 2  For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series.
NOTE 3  Accessory products can be manufactured from coupling stock and tubular material, or from solid bar stock or from bored and heat heat-treated bar stock as covered in Annex F.
This document contains no provisions relating to the connection of individual lengths of pipe.
This document contains provisions relating to marking of tubing and casing after threading.
This document is applicable to the following five groups of products:
a)   group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b)   group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;
c)   group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d)   group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e)   group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.
NOTE 4  Not all PSL-1 categories and grades can be made cracking resistant in accordance with the ISO 15156 series and are, therefore, not included in PSL-2.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11961:2018(Main)
Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
SIST EN ISO 11961:2019

This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this document. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3 are in Annex G.
This document covers the following grades of drill-pipe:
—          grade E drill-pipe;
—          high-strength grades of drill-pipe, grades X, G and S;
—          enhanced H2S resistance drill pipe, grades D and F.
A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The main dimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in USC units (see Table C.1).
This document can also be used for drill-pipe with tool joints not specified by ISO or API standards.
By agreement between purchaser and manufacturer, this document can also be applied to other drill-pipe body and/or tool-joint dimensions. This document lists supplementary requirements that can optionally be agreed between purchaser and manufacturer, for testing, performance verification and non-destructive examination (see Annex E).
This document does not consider performance properties, nor performance degradation of the product when in service.
NOTE 1    In this document, drill-pipe is designated by label 1, label 2, grade of material (E, X, G, S, D and F), upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in ordering.
NOTE 2    Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading of drill-pipe tool joints.
NOTE 3    Reference can be made to API RP 7G for the performance properties of the drill-pipe.

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13680:2020/prA1(Amendment)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions - Amendment 1: Petroleum and natural gas industries - Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020/DAM 1:2023)
SIST EN ISO 13680:2020/oprA1:2023
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11960:2021(Main)
Petroleum and natural gas industries - Steel pipes for use as casing or tubing for wells (ISO 11960:2020)
SIST EN ISO 11960:2021

This document specifies the technical delivery conditions for steel pipes (casing, tubing and pup joints), coupling stock, coupling material and accessory material.
By agreement between the purchaser and manufacturer, this document can also be applied to other plain-end pipe sizes and wall thicknesses.
This document is applicable to the following connections:
—     short round thread casing (SC);
—     long round thread casing (LC);
—     buttress thread casing (BC);
—     non-upset tubing (NU);
—     external upset tubing (EU);
—     integral-joint tubing (IJ).
NOTE 1  For further information, see API Spec 5B.
For such connections, this document specifies the technical delivery conditions for couplings and thread protection.
NOTE 2  Supplementary requirements that can optionally be agreed for enhanced leak resistance connections (LC) are given in A.9 SR22.
This document can also be applied to tubulars with connections not covered by ISO or API standards.
This document is applicable to products including the following grades of pipe: H40, J55, K55, N80, L80, C90, R95, T95, P110, C110 and Q125.
This document is not applicable to threading requirements.
NOTE 3  Dimensional requirements on threads and thread gauges, stipulations on gauging practice, gauge specifications, as well as, instruments and methods for inspection of threads are given in API Spec 5B.

  • Standard
    281 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13680:2020(Main)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020)
SIST EN ISO 13680:2020

This document specifies the technical delivery conditions for corrosion-resistant alloy seamless tubular products for casing, tubing, coupling stock and accessory material (including coupling stock and accessory material from bar) for two product specification levels:
—     PSL-1, which is the basis of this document;
—     PSL-2, which provides additional requirements for a product that is intended to be both corrosion and cracking resistant for the environments and qualification method specified in Annex G and in the ISO 15156 series.
At the option of the manufacturer, PSL-2 products can be provided in lieu of PSL-1.
NOTE 1  The corrosion-resistant alloys included in this document are special alloys in accordance with ISO 4948-1 and ISO 4948-2.
NOTE 2  For the purpose of this document, NACE MR0175 is equivalent to the ISO 15156 series.
NOTE 3  Accessory products can be manufactured from coupling stock and tubular material, or from solid bar stock or from bored and heat heat-treated bar stock as covered in Annex F.
This document contains no provisions relating to the connection of individual lengths of pipe.
This document contains provisions relating to marking of tubing and casing after threading.
This document is applicable to the following five groups of products:
a)   group 1, which is composed of stainless alloys with a martensitic or martensitic/ferritic structure;
b)   group 2, which is composed of stainless alloys with a ferritic-austenitic structure, such as duplex and super-duplex stainless alloy;
c)   group 3, which is composed of stainless alloys with an austenitic structure (iron base);
d)   group 4, which is composed of nickel-based alloys with an austenitic structure (nickel base);
e)   group 5, which is composed of bar only (Annex F) in age-hardened (AH) nickel-based alloys with austenitic structure.
NOTE 4  Not all PSL-1 categories and grades can be made cracking resistant in accordance with the ISO 15156 series and are, therefore, not included in PSL-2.

  • Standard
    136 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 11961:2018(Main)
Petroleum and natural gas industries - Steel drill pipe (ISO 11961:2018)
SIST EN ISO 11961:2019

This document specifies the technical delivery conditions for steel drill-pipes with upset pipe-body ends and weld-on tool joints for use in drilling and production operations in petroleum and natural gas industries for three product specification levels (PSL-1, PSL-2 and PSL-3). The requirements for PSL-1 form the basis of this document. The requirements that define different levels of standard technical requirements for PSL-2 and PSL-3 are in Annex G.
This document covers the following grades of drill-pipe:
—          grade E drill-pipe;
—          high-strength grades of drill-pipe, grades X, G and S;
—          enhanced H2S resistance drill pipe, grades D and F.
A typical drill-pipe configuration is given, showing main elements and lengths (see Figure B.1). The main dimensions and masses of the grades of drill-pipe are given in both SI units (see Table A.1) and in USC units (see Table C.1).
This document can also be used for drill-pipe with tool joints not specified by ISO or API standards.
By agreement between purchaser and manufacturer, this document can also be applied to other drill-pipe body and/or tool-joint dimensions. This document lists supplementary requirements that can optionally be agreed between purchaser and manufacturer, for testing, performance verification and non-destructive examination (see Annex E).
This document does not consider performance properties, nor performance degradation of the product when in service.
NOTE 1    In this document, drill-pipe is designated by label 1, label 2, grade of material (E, X, G, S, D and F), upset type and type of rotary shouldered connection. Designations are used for the purpose of identification in ordering.
NOTE 2    Reference can be made to ISO 10424-2 or API Spec 7-2 for the detailed requirements for the threading of drill-pipe tool joints.
NOTE 3    Reference can be made to API RP 7G for the performance properties of the drill-pipe.

  • Standard
    120 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 13680:2020/prA1(Amendment)
Petroleum and natural gas industries - Corrosion-resistant alloy seamless tubular products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions - Amendment 1: Petroleum and natural gas industries - Corrosion-resistant alloy seamless products for use as casing, tubing, coupling stock and accessory material - Technical delivery conditions (ISO 13680:2020/DAM 1:2023)
SIST EN ISO 13680:2020/oprA1:2023
  • Draft
    21 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17972:2024(Main)
Food authenticity - Food authenticity and fraud - Concepts, terms and definitions
SIST EN 17972:2025

This document provides technical definitions of terms relating to authenticity and fraud when referring to food products. All terms and definitions are in the context of food supply chains, but most of them can also be applied when referring to feed products and the feed supply chain.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12735-2:2024(Main)
Copper and copper alloys - Seamless, round tubes for air conditioning and refrigeration - Part 2: Tubes for equipment
SIST EN 12735-2:2025

This document specifies the requirements, sampling, test methods and conditions of delivery for seamless round copper tubes, smooth or inner finned, used for heat exchangers and their internal connecting pipes in the manufacturing of refrigeration and air conditioning equipment.
It is applicable to tubes with an outside diameter from 3,97 mm up to and including 219 mm.
NOTE   The tubes are supplied in straight length or as coils.

  • Draft
    27 pages
    English language
    sale 10% off
    e-Library read for
    1 day