EN 13082:2008+A1:2012

Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve

This European Standard covers the vapour transfer valve, used for the transfer of vapour between the tank compartment and the pipework connecting to the vapour collection adaptor.
This European Standard specifies the performance requirements and the critical dimensions of the vapour transfer valve. It also specifies the tests necessary to verify the compliance of the equipment with this European Standard. The equipment specified by this standard is suitable for use with liquid petroleum products and other dangerous substances of Class 3 of ADR [2] which have a vapour pressure not exceeding 110 kPa at 50 °C and petrol, and which have no sub-classification as toxic or corrosive.

Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Gaspendelventil

Diese Europäische Norm behandelt das Gaspendelventil, das zur Weiterleitung von Gas zwischen dem
Tankabteil und der Verbindungsleitung zur VKG-Kupplung dient.
In dieser Europäischen Norm sind die Leistungsanforderungen und die wesentlichen Maße des
Gaspendelventils festgelegt. Weiterhin sind die Prüfungen festgelegt, mit denen nachgewiesen werden kann,
ob die Ausrüstung den Anforderungen dieser Europäischen Norm entspricht. Die in dieser Norm beschriebene
Ausrüstung ist zum Umfüllen flüssiger Erdölerzeugnisse und anderer gefährlicher Güter der Klasse 3 des
ADR [2] geeignet, deren Dampfdruck bei 50 °C max. 110 kPa beträgt (einschließlich Ottokraftstoff) und die
nicht als giftig oder ätzend eingestuft sind.

Citernes de transport de matières dangereuses - Équipement de service pour citernes - Évent de transfert des vapeurs récupérées

La présente Norme européenne traite de l’évent de transfert des vapeurs récupérées utilisé pour le transfert des vapeurs entre la citerne et la tuyauterie de raccordement à l’adaptateur pour la récupération des vapeurs.
La présente Norme européenne spécifie les caractéristiques de performance et les dimensions essentielles de l’évent de transfert des vapeurs récupérées. Elle spécifie également les essais à réaliser pour vérifier la conformité des équipements à la présente Norme européenne. Les équipements spécifiés par la présente norme conviennent à une utilisation avec des produits pétroliers liquides et autres matières dangereuses de la classe 3 de l’ADR [2], dont la tension de vapeur ne dépasse pas 110 kPa à 50 °C (y compris l’essence), et qui n’appartiennent à aucune sous-classe de produits toxiques ou corrosifs.

Cisterne za prevoz nevarnega blaga - Oprema za obratovanje cistern - Ventil za izenačitev parnega tlaka (vključno z dopolnilom A1)

Ta evropski standard zajema ventil za izenačitev parnega tlaka, ki se uporablja za prenos pare med oddelkom s cisterno in cevovodom, ki je povezan s spojko za zbiralnik pare. Ta evropski standard določa zahteve za učinkovitost in kritične mere ventila za izenačitev parnega tlaka. Določa tudi preskuse, potrebne za preverjanje skladnosti opreme s tem evropskim standardom. Oprema, ki jo določa ta standard, je primerna za uporabo s tekočimi naftnimi proizvodi in drugimi nevarnimi snovmi kategorije 3 ADR, katerih parni tlak ne presega 110 kPa pri 50 °C, ter z motornim bencinom, pri čemer niso dodatno opredeljeni kot strupeni ali korozivni.

General Information

• Status: Published
• Publication Date: 14-Feb-2012
• ICS: 13.300 - Protection against dangerous goods
• ICS: 23.020.20 - Vessels and containers mounted on vehicles
• ICS: 23.060.20 - Ball and plug valves
• Technical Committee: CEN/TC 296 - Tanks for transport of dangerous goods
• Drafting Committee: CEN/TC 296/WG 7 - Service equipment (including equipment for vapour recovery, bottom loading, the confinement and handling of petroleum products)
• Current Stage: 9020 - Submission to 2 Year Review Enquiry - Review Enquiry
• Start Date: 15-Jul-2024
• Completion Date: 15-Jul-2024
• Directive: 2008/68/EC - Directve 2008/68/EC of the European Parliament and of the council of 24 September 2008 on the inland transport of the dangerous goods
• Mandate: M/086 - Mandate to CEN for standardization in the field of transport of dangerous goods
• Ref Project: SIST EN 13082:2009+A1:2012 - Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve

Relations

• Merged From: EN 13082:2008 - Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
• Effective Date: 19-Jan-2023
• Merged From: EN 13082:2008/FprA1 - Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
• Effective Date: 07-Dec-2011

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - GaspendelventilCiternes de transport de matières dangereuses - Équipement de service pour citernes - Évent de transfert des vapeurs récupéréesTanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve23.060.20Zapirni ventili (kroglasti in pipe)Ball and plug valves23.020.20Posode in vsebniki, montirani na vozilaVessels and containers mounted on vehicles13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 13082:2008+A1:2012SIST EN 13082:2009+A1:2012en,fr,de01-junij-2012SIST EN 13082:2009+A1:2012SLOVENSKI
STANDARDSIST EN 13082:20091DGRPHãþD

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 13082:2008+A1
February 2012 ICS 13.300; 23.020.20; 23.060.20 Supersedes EN 13082:2008English Version
Tanks for transport of dangerous goods - Service equipment for tanks - Vapour transfer valve
Citernes de transport de matières dangereuses - Équipement de service pour citernes - Évent de transfert des vapeurs récupérées
Tanks für die Beförderung gefährlicher Güter - Bedienungsausrüstung von Tanks - Gaspendelventil This European Standard was approved by CEN on 13 September 2008 and includes Amendment 1 approved by CEN on 24 December 2011.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2012 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 13082:2008+A1:2012: ESIST EN 13082:2009+A1:2012

Drop test apparatus . 13Annex B (normative)
Maximum height - Installation requirement . 14Bibliography . 15 SIST EN 13082:2009+A1:2012
...