iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 1324:2007

(Main)

Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives

Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives

This European Standard specifies the test method for the determination of the shear adhesion strength of dispersion ceramic tile adhesives.
This European Standard applies to all dispersion ceramic tile adhesives for internal tile installations on walls and floors.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives can also be used for other types of tiles (natural and agglomerated stones etc.), if they do not adversely affect the stones.

Mörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit von Dispersionsklebstoffen

Diese Europäische Norm legt das Prüfverfahren fest, das zur Bestimmung der Haftscherfestigkeit von Dispersionsklebstoffen für keramische Fliesen und Platten anzuwenden ist.
Diese Europäische Norm gilt für alle Dispersionsklebstoffe für die Verarbeitung von keramischen Fliesen und Platten an Wänden und Böden im Innenbereich.
In dieser Europäischen Norm sind keine Leistungsanforderungen oder Empfehlungen für die Ausführung und Verarbeitung von keramischen Fliesen und Platten enthalten.
ANMERKUNG   Mörtel und Klebstoffe für keramische Fliesen und Platten können auch für andere Arten von Fliesen und Platten (Naturwerkstein, Betonwerkstein usw.) verwendet werden, wenn diese Materialien hierdurch nicht beeinträchtigt werden.

Colles à carrelage - Détermination de l'adhérence par cisaillement des adhésifs en dispersion

La présente Norme européenne spécifie la méthode d’essai devant être utilisée pour déterminer l’adhérence par cisaillement des adhésifs en dispersion pour carrelage.
La présente Norme européenne s’applique à touts les adhésifs en dispersion pour carreaux céramiques destinés à la pose intérieure sur les murs et les sols.
La présente Norme européenne ne contient pas d’exigences de performance, ni de recommandations pour la conception et la pose du carrelage.
NOTE   Les adhésifs pour carreaux céramiques peuvent également être utilisées pour d’autres types de carrelages (carreaux de pierres naturelles ou de pierres reconstituées etc.) lorsqu’elles sont compatibles.

Lepila za ploščice - Ugotavljanje strižne adhezijske trdnosti disperzijskih lepil

General Information

Status
Withdrawn
Publication Date
28-Aug-2007
Withdrawal Date
14-Feb-2017
ICS
83.180 - Adhesives
91.100.10 - Cement. Gypsum. Lime. Mortar
Technical Committee
CEN/TC 67 - Ceramic tiles
Drafting Committee
CEN/TC 67/WG 3 - Adhesives and grouts for tiles
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
15-Feb-2017
Directive
305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
89/106/EEC - Construction products
Mandate
M/119 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on floorings
Ref Project
SIST EN 1324:2007 - Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives

Relations

Replaces
EN 1324:1996 - Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives
Effective Date
22-Dec-2008
Replaces
EN 1324:1996/A1:1998 - Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesives
Effective Date
22-Dec-2008
Replaced By
EN 12004-2:2017 - Adhesives for ceramic tiles - Part 2: Test methods
Effective Date
22-Feb-2017

Buy Standard

EN 1324:2007EN 1324:2007
PreviousNext
Standard
EN 1324:2007
English language
11 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Adhesives for tiles - Determination of shear adhesion strength of dispersion adhesivesAdhésifs pour carrelage - Détermination de l'adhérence par cisaillement d'un adhésif en dispersionMörtel und Klebstoffe für Fliesen und Platten - Bestimmung der Haftfestigkeit von DispersionsklebstoffenTa slovenski standard je istoveten z:EN 1324:2007SIST EN 1324:2007en,de91.100.10Cement. Mavec. Apno. MaltaCement. Gypsum. Lime. Mortar83.180LepilaAdhesivesICS:SIST EN 1324:1998/A1:2000SIST EN 1324:19981DGRPHãþDSLOVENSKI
STANDARDSIST EN 1324:200701-december-2007

EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 1324August 2007ICS 83.180; 91.100.10Supersedes EN 1324:1996
English VersionAdhesives for tiles - Determination of shear adhesion strength ofdispersion adhesivesAdhésifs pour carrelage - Détermination de l'adhérence parcisaillement d'un adhésif en dispersionMörtel und Klebstoffe für Fliesen und Platten - Bestimmungder Haftfestigkeit von DispersionsklebstoffenThis European Standard was approved by CEN on 21 January 2007.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2007 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 1324:2007: E

1 S
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 12004-1:2017(Main)
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
SIST EN 12004-1:2017

This European Standard is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This European Standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.
This European Standard specifies the performance requirements for the adhesives for ceramic tiles.
It also specifies the appurtenant test methods, assessment and verification of constancy of performance (AVCP), as well as classification, designation and marking of adhesives for ceramic tiles.
This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles.
Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12004-2:2017(Main)
Adhesives for ceramic tiles - Part 2: Test methods
SIST EN 12004-2:2017

This European Standard specifies the methods for determining characteristics for adhesives used in internal and external installation of ceramic tiles.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
The following test methods are described:
-   determination of open time (8.1);
-   determination of slip (8.2);
-   determination of tensile adhesion strength for cementitious adhesives (8.3);
-   determination of shear adhesion strength of dispersion adhesives (8.4);
-   determination of shear adhesion strength of reaction resin adhesives (8.5);
-   determination of transverse deformation of cementitious adhesives (8.6).
NOTE   Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones, etc.), if they do not adversely affect the stones.
WARNING - This European Standard can involve hazardous materials and operations. Persons using this standard should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12004-3(Main)
Adhesives for ceramic tiles - Part 3: Terminology, specifications, designation and marking
oSIST prEN 12004-3:2022

This document specifies the additional characteristics for the adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document provides the terminology concerning the products, working methods, application properties, etc., for ceramic tile adhesives.
This document does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives are also used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 12004-1(Main)
Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
kSIST FprEN 12004-1:2020

This document is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document specifies the essential characteristics and the respective threshold levels of the adhesives for ceramic tiles.
It also specifies the appurtenant test methods and the assessment and verification of constancy of performance (AVCP).
NOTE   This document does not provide criteria or recommendations for the design and installation of ceramic tiles.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12004-1:2017(Main)
Adhesives for ceramic tiles - Part 1: Requirements, assessment and verification of constancy of performance, classification and marking
SIST EN 12004-1:2017

This European Standard is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This European Standard gives the terminology concerning the products, working methods, application properties, etc, for ceramic tile adhesives.
This European Standard specifies the performance requirements for the adhesives for ceramic tiles.
It also specifies the appurtenant test methods, assessment and verification of constancy of performance (AVCP), as well as classification, designation and marking of adhesives for ceramic tiles.
This European Standard does not provide criteria or recommendations for the design and installation of ceramic tiles.
Ceramic tile adhesives may also be used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12004-2:2017(Main)
Adhesives for ceramic tiles - Part 2: Test methods
SIST EN 12004-2:2017

This European Standard specifies the methods for determining characteristics for adhesives used in internal and external installation of ceramic tiles.
This European Standard does not contain performance requirements or recommendations for the design and installation of ceramic tiles.
The following test methods are described:
-   determination of open time (8.1);
-   determination of slip (8.2);
-   determination of tensile adhesion strength for cementitious adhesives (8.3);
-   determination of shear adhesion strength of dispersion adhesives (8.4);
-   determination of shear adhesion strength of reaction resin adhesives (8.5);
-   determination of transverse deformation of cementitious adhesives (8.6).
NOTE   Ceramic tile adhesives can be used also for other kinds of tiles (natural and agglomerated stones, etc.), if they do not adversely affect the stones.
WARNING - This European Standard can involve hazardous materials and operations. Persons using this standard should be familiar with normal laboratory practice. This European Standard does not purport to address all the safety problems, if any, associated with its use. It is the responsibility of the user to establish appropriate safety and health practices and to ensure compliance with any European and national regulatory conditions.

  • Standard
    35 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
prEN 12004-3(Main)
Adhesives for ceramic tiles - Part 3: Terminology, specifications, designation and marking
oSIST prEN 12004-3:2022

This document specifies the additional characteristics for the adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document provides the terminology concerning the products, working methods, application properties, etc., for ceramic tile adhesives.
This document does not provide criteria or recommendations for the design and installation of ceramic tiles.
NOTE   Ceramic tile adhesives are also used for other types of tiles (natural and agglomerated stones, etc.), if they do not adversely affect these materials.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
FprEN 12004-1(Main)
Adhesives for ceramic tiles - Part 1: Essential characteristics and AVCP
kSIST FprEN 12004-1:2020

This document is applicable to the following three types of adhesives for ceramic tiles, i.e. cementitious ones for internal and external tile installations, dispersion and reaction resin ones for internal tile installations, on walls and floors.
This document specifies the essential characteristics and the respective threshold levels of the adhesives for ceramic tiles.
It also specifies the appurtenant test methods and the assessment and verification of constancy of performance (AVCP).
NOTE   This document does not provide criteria or recommendations for the design and installation of ceramic tiles.

  • Draft
    18 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17677:2024(Main)
Food processing machinery - Craft bakery and pastry depositors - Safety and hygiene requirements
kSIST FprEN 17677:2024

1.1 This document specifies safety and hygiene requirements for the design and manufacture of craft bakery and pastry depositors as described in the normative Annex A and which:
a)   are intended to be:
-   only for professional use;
-   used by one operator at a time;
-   used to deposit only pasty food (i.e.: cream, dough, batter, etc.);
-   used to deposit only on trays;
-   used as standalone machines;
-   used with manual loading of the dough into the hopper;
-   used with manual loading and unloading of the tray/s on/from the tray conveyor.
b)   can carry out only the following movements and relevant directions (see Figure 1a)):
-   Z: vertical movement of the table and/or the deposit unit;
-   X: horizontal movement of the tray conveyor;
-   Y: possible horizontal component of the movement only of the spouts themselves inside the deposit unit;
c)   are fitted with one or more hoppers whose capacity is ≤ 60 dm3 each;
d)   have a total length of the tray conveyor ≤ 1 600 mm;
e)   have a vertical movement between spouts and tray conveyor (H) ≤ 200 mm (see Figure 1c));
f)   have a deposit performance (see 3.5):
-   ≤ 60 cycles/minute with up/down movement of the table or the deposit unit;
-   ≤ 100 cycles/minute without up/down movement of the table or the deposit unit;
g)   have a trays performance (see 3.6) ≤ 4 trays/minute.
This document deals with all significant hazards, hazardous situations and events relevant to adjustment, operation and cleaning of craft bakery and pastry depositors, when they are used as intended or under conditions of misuse which are reasonably foreseeable by the manufacturer.
This document covers requirements for the safe operation of the machine, including loading, depositing, unloading and cleaning.
1.2 The following hazards are not covered by this document:
-   hazards arising from the use of an automatic hopper loading system;
-   hazards due to packaging, handling or transport;
-   hazards arising from electromagnetic compatibility issues;
-   hazards due to dismantling and disassembling;
-   hazards due to operational stop;
-   hazards due to selection of control or operating modes;
-   hazards due to failure of the power supply;
-   hazards due to surfaces, edges or angles;
-   hazards due to uncontrolled movements;
-   hazards due to machinery maintenance.
This standard does not deal with any specific requirements on noise emitted from craft bakery and pastry depositor as the generated noise does not cause a relevant hazard.
The significant hazards covered by this document are described in Annex B.
1.3 The following machines are excluded from the scope of this document:
a)   machines which deposit pasty food by means of needles (injection);
b)   machines where the trays are put onto and/or removed from the tray conveyor automatically;
c)   machines which require a blade for the cutting system;
d)   domestic appliances;
e)   machines for industrial production;
f)   machines to deposit other products than food for bakery and pastry products.
1.4 This document is not applicable to machines which are manufactured before the date of publication of this European Standard.

  • Draft
    47 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 17137:2024(Main)
Textiles and textile products - Determination of the content of compounds based on chlorobenzenes and chlorotoluenes
kSIST FprEN 17137:2024

This document specifies a test method using gas chromatography with mass selective detector (GC-MS) for detection and quantification of chlorobenzenes, chlorotoluenes, and α-chlorinated toluenes in fibres, yarns, fabrics, coated fabrics and plastics.

  • Draft
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day