EN ISO 15609-2:2001

Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001)

This European Standard specifies requirements for the content of welding procedure specifications for gas welding processes.
This standard is part of a series of standards, details of this series are given in prEN ISO 15607, annex A.
Variables listed in this standard are those influencing the quality of the welded joint.

Anforderung und Anerkennung von Schweißverfahren für metallische Werkstoffe - Schweißanweisung - Teil 2: Gasschweißen (ISO 15609-2:2001)

Diese Norm legt die Anforderungen für den Inhalt der Schweißanweisungen für Gasschweißprozesse fest. Diese Norm ist Teil einer Normenreihe. Anhang B enthält eine Übersicht dieser Normenreihe. In dieser Norm sind die veränderlichen Größen aufgeführt, die die Qualität der Verbindung beeinflussen.

Descriptif et qualification d'un mode opératoire de soudage pour les matériaux métalliques - Descriptif d'un mode opératoire de soudage - Partie 2: Soudage aux gaz (ISO 15609-2:2001)

La présente norme internationale spécifie les exigences concernant le contenu des descriptifs de modes opératoires de soudage pour les procédés de soudage aux gaz. La présente norme fait partie d'une série de normes, les détails sur cette série de normes sont donnés dans l'annexe A du prISO 15607. Les variables énumérées dans la présente norme sont celles qui ont une influence sur la qualité de l'assemblage soudé.

Popis in kvalifikacija varilnih postopkov za kovinske materiale - Popis varilnega postopka - 2. del: Plamensko varjenje (ISO 15609-2:2001)

General Information

• Status: Withdrawn
• Publication Date: 31-Aug-2001
• Withdrawal Date: 01-Oct-2019
• ICS: 25.160.10 - Welding processes
• Technical Committee: CEN/TC 121 - Welding
• Drafting Committee: CEN/TC 121/SC 4 - Quality management in the field of welding
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Completion Date: 02-Oct-2019
• Directive: 97/23/EC - Directive 97/23/EC of the European Parliament and of the Council of 29 May 1997 on the approximation of the laws of the Member States concerning pressure equipment
• Mandate: M/071 - Mandate to CEN for standardization in the field of Pressure equipment
• Ref Project: SIST EN ISO 15609-2:2002 - Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2001)

Relations

• Replaced By: EN ISO 15609-2:2019 - Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2019)
• Effective Date: 08-Jun-2022
• Amended By: EN ISO 15609-2:2001/A1:2003 - Specification and qualification of welding procedures for metallic materials - Welding procedure specification - Part 2: Gas welding (ISO 15609-2:2003)
• Effective Date: 08-Jun-2022

Standards Content (Sample)

SLOVENSKI STANDARD
01-maj-2002
Popis in kvalifikacija varilnih postopkov za kovinske materiale - Popis varilnega
postopka - 2. del: Plamensko varjenje (ISO 15609-2:2001)
Specification and qualification of welding procedures for metallic materials - Welding
procedure specification - Part 2: Gas welding (ISO 15609-2:2001)
Anforderung und Anerkennung von Schweißverfahren für metallische Werkstoffe -
Schweißanweisung - Teil 2: Gasschweißen (ISO 15609-2:2001)
Descriptif et qualification d'un mode opératoire de soudage pour les matériaux
métalliques - Descriptif d'un mode opératoire de soudage - Partie 2: Soudage aux gaz
(ISO 15609-2:2001)
Ta slovenski standard je istoveten z: EN ISO 15609-2:2001
ICS:
25.160.10 Varilni postopki in varjenje Welding processes
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 15609-2
NORME EUROPÉENNE
EUROPÄISCHE NORM
September 2001
ICS 25.160.10
English version
Specification and qualification of welding procedures for metallic
materials - Welding procedure specification - Part 2: Gas
welding (ISO 15609-2:2001)
Descriptif et qualification d'un mode opératoire de soudage Anforderung und Anerkennung von Schweißverfahren für
pour les matériaux métalliques - Descriptif d'un mode metallische Werkstoffe - Schweißanweisung - Teil 2:
opératoire de soudage - Partie 2: Soudage aux gaz (ISO Gasschweißen (ISO 15609-2:2001)
15609-2:2001)
This European Standard was approved by CEN on 2 May 2001.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,
Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2001 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 15609-2:2001 E
worldwide for CEN national Members.

Contents
page
Foreword.3
1 Scope .4
2 Normative references .4
3 Terms and definitions.4
4 Technical contents of Welding Procedure Specification (WPS).4
4.1 General.4
4.2 Information related to the manufacturer .5
4.3 Information related to the parent material.5
4.4 Information common to all welding procedures.5
Annex A (informative)  Manufacturer's Welding Procedure Specification (WPS) .7
Annex ZA (informative) Clauses of this European Standard addressing essential requirements or other
provisions of EU directives.8
Foreword
The text of EN ISO 15609-2:2001 has been prepared by Technical Committee CEN/TC 121 "Welding", the
secretariat of which is held by DS, in collaboration with Technical Committee ISO/TC 44 "Welding and allied
processes".
This European Standard shall be given the status of a national standard, either by publication of an identical text or
by endorsement, at the latest by March 2002, and conflicting national standards shall be withdrawn at the latest by
March 2002.
This European Standard has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative annex ZA, which is an integral part of this standard.
The annexes A and ZA are informative.
According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland,
France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden,
Switzerland and the United Kingdom.
1 Scope
...