EN ISO 12543-5:1998

Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998)

This part of this European Standard specifies dimensions, limit deviations, and edge finishes of laminated glass and laminated safety glass for use in building. It does not apply to panes having an area less than 0,05 m2.

Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 5: Maße und Kantenbearbeitung (ISO 12543-5:1998)

Dieser Teil der vorliegenden Europäischen Norm legt Maße, Grenzabweichungen und Kantenbearbeitungen von Verbundglas und Verbund-Sicherheitsglas im Bauwesen fest. Er findet keine Anwendung auf Scheiben mit einer Fläche kleiner als 0,05 m2.

Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 5: Dimensions et façonnage des bords (ISO 12543-5:1998)

La présente partie de cette norme européenne spécifie les dimensions, tolérances et les types de façonnage des bords  des verres feuilletés de sécurité utilisé dans le domaine de la construction. Elle ne s'applique pas au panneaux de surface inférieure à 0,05 m2.

Steklo v stavbah - Lamelirano steklo in lamelirano varnostno steklo - 5. del: Mere in robovi (ISO 12543-5:1998)

General Information

• Status: Withdrawn
• Publication Date: 14-Jun-1998
• Withdrawal Date: 14-Aug-2011
• ICS: 81.040.20 - Glass in building
• Technical Committee: CEN/TC 129 - Glass in building
• Drafting Committee: CEN/TC 129/WG 3 - Laminated glass
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 15-Aug-2011
• Completion Date: 15-Aug-2011
• Directive: 305/2011 - Regulation (eu) No 305/2011 of the European Parliament and of the Council of 9 march 2011 laying down harmonised conditions for the marketing of construction products and repealing council directive 89/106/eec
• Directive: 89/106/EEC - Construction products
• Mandate: M/135 - Mandate to CEN/CENELEC concerning the execution of standardization work for harmonized standards on flat glass, profiled glass and glass block products
• Ref Project: SIST EN ISO 12543-5:1999 - Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:1998)

Relations

• Replaced By: EN ISO 12543-5:2011 - Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and edge finishing (ISO 12543-5:2011)
• Effective Date: 22-Dec-2008
• Parent: EN ISO 12543-1:1998 - Glass in building - Laminated glass and laminated safety glass - Part 1: Definitions and description of component parts (ISO 12543-1:1998)
• Effective Date: 22-Dec-2008

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 12543-5:1999
01-november-1999
Steklo v stavbah - Lamelirano steklo in lamelirano varnostno steklo - 5. del: Mere
in robovi (ISO 12543-5:1998)
Glass in building - Laminated glass and laminated safety glass - Part 5: Dimensions and
edge finishing (ISO 12543-5:1998)
Glas im Bauwesen - Verbundglas und Verbund-Sicherheitsglas - Teil 5: Maße und
Kantenbearbeitung (ISO 12543-5:1998)
Verre dans la construction - Verre feuilleté et verre feuilleté de sécurité - Partie 5:
Dimensions et façonnage des bords (ISO 12543-5:1998)
Ta slovenski standard je istoveten z: EN ISO 12543-5:1998
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
SIST EN ISO 12543-5:1999 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN ISO 12543-5:1999

---------------------- Page: 2 ----------------------

SIST EN ISO 12543-5:1999

---------------------- Page: 3 ----------------------

SIST EN ISO 12543-5:1999

----------
...