CEN/TS 16794-1:2019
(Main)Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443
Public transport - Communication between contactless readers and fare media - Part 1: Implementation requirements for ISO/IEC 14443
This document constitutes the 3rd edition of CEN/TS 16794-1. It sets out the technical requirements to be met by contactless Public Transport (PT) devices in order to be able to interface together using the ISO/IEC 14443 series contactless communications protocol.
This document applies to PT devices:
- PT readers which are contactless fare management system terminals acting as a PCD contactless reader based on the ISO/IEC 14443 series;
- PT objects which are contactless fare media acting as a PICC contactless object based on the ISO/IEC 14443 series.
This edition addresses interoperability of consumer-market NFC mobile devices, compliant to NFC Forum specifications, with above mentioned PT devices, aligns with the 4th edition of the ISO/IEC 14443 series and maintains the possibility for PT readers to comply with the requirements from EMV Contactless Interface Specification [1] and the present document.
An interface–oriented test approach is used to evaluate the conformity of PT devices and is defined in CEN/TS 16794-2.
Application-to-application exchanges executed once contactless communication has been established at RF level fall outside the scope of this document. In line with the rules on independence between OSI protocol layers, this document works on the assumption that application-to-application exchanges are not contingent on the type of contactless communication established or the parameters used for the low-level protocol layers that serve as the platform for these application-to-application exchanges.
Öffentlicher Verkehr - Kommunikation zwischen berührungslosen Lesegeräten und Fahrscheinmedien - Teil 1: Implementierungsanforderungen zur ISO/IEC 14443
Transport Public - Système billettique interopérable - Communication entre terminaux et objets sans contact - Partie 1: Exigences d’implémentation pour l’ISO/IEC 14443
Javni prevoz - Komunikacija med brezkontaktnimi čitalniki/terminali in prevoznimi mediji - 1. del: Zahteve za izvajanje ISO/IEC 14443
Ta dokument predstavlja 3. izdajo standarda CEN/TS 16794 1. Določa tehnične zahteve, ki jih morajo izpolnjevati brezkontaktne naprave javnega prevoza (PT), da jim je omogočeno skupno delovanje s pomočjo brezkontaktnega komunikacijskega protokola skupine standardov ISO/IEC 14443.
Dokument se uporablja za naprave javnega prevoza:
– čitalnike javnega prevoza, ki so brezkontaktni terminali za prevozne medije in delujejo kot brezkontaktni čitalniki PCD na podlagi skupine standardov ISO/IEC 14443;
– predmete javnega prevoza, ki so brezkontaktni prevozni mediji, ki delujejo kot brezkontaktni predmet PICC na podlagi skupine standardov ISO/IEC 14443.
Ta izdaja obravnava interoperabilnost potrošniških mobilnih naprav NFC, ki so v skladu s specifikacijami foruma NFC, z zgoraj omenjenimi napravami javnega prevoza, je usklajena s četrto izdajo skupine standardov ISO/IEC 14443 in omogoča, da čitalniki javnega prevoza izpolnjujejo zahteve specifikacij brezkontaktnega vmesnika pri transakcijah EMV [1] in tega dokumenta.
Za ocenjevanje skladnosti naprav javnega prevoza se uporablja vmesniško usmerjen preskusni pristop, ki je opredeljen v standardu CEN/TS 16794 2.
Izmenjave med aplikacijami, ki so izvedene po vzpostavitvi brezkontaktne komunikacije na radiofrekvenčni stopnji, ne spadajo na področje uporabe tega dokumenta. V skladu s pravili o neodvisnosti med plastmi protokolov OSI ta dokument predpostavlja, da izmenjave med aplikacijami niso odvisne od vrste vzpostavljene brezkontaktne komunikacije ali parametrov, ki se uporabljajo za protokole nižjih plasti, ki služijo kot platforma za te izmenjave med aplikacijami.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
SIST-TS CEN/TS 16794-1:2019
01-december-2019
Nadomešča:
SIST-TS CEN/TS 16794-1:2017
Javni prevoz - Komunikacija med brezkontaktnimi čitalniki/terminali in prevoznimi
mediji - 1. del: Zahteve za izvajanje ISO/IEC 14443
Public transport - Communication between contactless readers and fare media - Part 1:
Implementation requirements for ISO/IEC 14443
Öffentlicher Verkehr - Kommunikation zwischen berührungslosen Lesegeräten und
Fahrscheinmedien - Teil 1: Implementierungsanforderungen zur ISO/IEC 14443
Ta slovenski standard je istoveten z: CEN/TS 16794-1:2019
ICS:
35.240.15 Identifikacijske kartice. Čipne Identification cards. Chip
kartice. Biometrija cards. Biometrics
35.240.60 Uporabniške rešitve IT v IT applications in transport
prometu
SIST-TS CEN/TS 16794-1:2019 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
---------------------- Page: 1 ----------------------
SIST-TS CEN/TS 16794-1:2019
---------------------- Page: 2 ----------------------
SIST-TS CEN/TS 16794-1:2019
CEN/TS 16794-1
TECHNICAL SPECIFICATION
SPÉCIFICATION TECHNIQUE
October 2019
TECHNISCHE SPEZIFIKATION
ICS 35.240.15; 35.240.60 Supersedes CEN/TS 16794-1:2017
English Version
Public transport - Communication between contactless
readers and fare media - Part 1: Implementation
requirements for ISO/IEC 14443
Transport Public - Système billettique interopérable - Öffentlicher Verkehr - Kommunikation zwischen
Communication entre terminaux et objets sans contact berührungslosen Lesegeräten und Fahrscheinmedien -
- Partie 1: Exigences d'implémentation pour l'ISO/IEC Teil 1: Implementierungsanforderungen zur ISO/IEC
14443 14443
This Technical Specification (CEN/TS) was approved by CEN on 17 June 2019 for provisional application.
The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to
submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.
CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS
available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in
parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and
United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2019 CEN All rights of exploitation in any form and by any means reserved Ref. No. CEN/TS 16794-1:2019 E
worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST-TS CEN/TS 16794-1:2019
CEN/TS 16794-1:2019 (E)
Contents Page
European foreword . 4
1 Scope . 5
2 Normative references . 5
3 Terms and definitions . 6
4 Symbols and abbreviations . 7
5 Conformance . 7
6 Dual conformance of PT devices to the CEN/TS 16794 series and EMV Contactless
Interface Specification . 7
7 Interoperability of PT devices and NFC mobile devices . 8
7.1 Description of the “concept for interoperability” . 8
7.2 References for implementation and test of NFC mobile devices . 9
7.3 Limitations .
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.