Sterilization of health care products - Moist heat - Part 1: Requirements for the development, validation and routine control of a sterilization process for medical devices (ISO 17665-1:2006)

ISO 17665-1:2006 specifies requirements for the development, validation and routine control of a moist heat sterilization process for medical devices.
Moist heat sterilization processes covered by ISO 17665-1:2006 include but are not limited to:
saturated steam venting systems;saturated steam active air removal systems;air steam mixtures;water spray;water immersion.

Sterilisation von Produkten für die Gesundheitsfürsorge - Feuchte Hitze - Teil 1: Anforderungen an die Entwicklung, Validierung und Lenkung der Anwendung eines Sterilisationsverfahrens für Medizinprodukte (ISO 17665-1:2006)

1.1   Im Anwendungsbereich enthalten
1.1.1   Dieser Teil von ISO 17665 legt Anforderungen für die Entwicklung, Validierung und Lenkung der Anwendung eines Verfahrens für die Sterilisation von Medizinprodukten durch feuchte Hitze fest.
ANMERKUNG   Obgleich der Anwendungsbereich dieses Teils von ISO 17665 auf Medizinprodukte begrenzt ist, legt er Anforderungen fest und gibt Anleitungen, die auf weitere Produkte für die Gesundheitsfürsorge anwendbar sein können.
1.1.2   Zu den durch diesen Teil von ISO 17665 erfassten Sterilisationsverfahren mit feuchter Hitze gehören, ohne darauf begrenzt zu sein:
a)   Verfahren mit gesättigtem Dampf und Systemen zur Verdrängung von Luft durch Dampf;
b)   Verfahren mit gesättigtem Dampf und Zwangsentlüftung;
c)   Dampf-Luft Gemisch-Verfahren;
d)   Wasserberieselungs-Verfahren;
e)   Verfahren mit Eintauchen in Wasser.
ANMERKUNG   Siehe auch Anhang E.
1.2   Im Anwendungsbereich nicht enthalten
1.2.1   Dieser Teil von ISO 17665 legt keine Anforderungen an die Entwicklung, Validierung und Lenkung der Anwendung eines Verfahrens zur Inaktivierung des Agnes fest, das spongiforme Enzephalopathien wie Scrapie, bovine spongiforme Enzephalitis und Creutzfeldt Jakob Krankheit auslöst. Für die Behandlung von möglicherweise mit diesem Agens kontaminierten Materialien sind in einzelnen Ländern spezifische Empfehlungen herausgegeben worden.
ANMERKUNG   Siehe auch ISO 22442 1, ISO 22442 2 und ISO 22442 3.
1.2.2   Dieser Teil von ISO 17665 gilt nicht für diejenigen Sterilisationsverfahren, deren Grundlage eine Kombination von feuchter Hitze mit anderen biologisch abtötenden Mitteln (z. B. Formaldehyd) als sterilisierendes Agens ist.
1.2.3   Dieser Teil von ISO 17665 enthält keine im Einzelnen festgelegte Anforderung zur Bezeichnung eines Medizin¬produkts als steril.
ANMERKUNG   Zu beachten sind nationale oder regionale Anforderungen zur Bezeichnung von Medizinprodukten als steril. Siehe z. B. EN 556 1 oder ANSI/AAMI ST67.

Stérilisation des produits de santé - Chaleur humide - Partie 1: Exigences pour le développement, la validation et le contrôle de routine d'un procédé de stérilisation des dispositifs médicaux (ISO 17665-1:2006)

L'ISO 17665-1:2006 spécifie les exigences relatives au développement, à la validation et au contrôle de routine du procédé de stérilisation des dispositifs médicaux à la chaleur humide.
Les procédés de stérilisation à la chaleur humide auxquels la présente Norme internationale s'applique sont les suivants, sans toutefois s'y limiter:
systèmes d'évacuation de la vapeur saturée;systèmes d'évacuation forcée de l'air/vapeur saturée;mélanges air/vapeur;vaporisation d'eau;immersion dans l'eau.

Sterilizacija izdelkov za zdravstveno nego - Vlažna toplota - 1. del: Zahteve za razvoj, validacijo in rutinsko kontrolo sterilizacijskih postopkov za medicinske pripomočke (ISO 17665-1:2006)

General Information

Status
Published
Publication Date
14-Aug-2006
Withdrawal Date
30-Aug-2009
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
15-Aug-2006
Completion Date
15-Aug-2006

Relations

Buy Standard

Standard
EN ISO 17665-1:2006
English language
48 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day
Draft
prEN ISO 17665:2004
English language
59 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN ISO 17665-1:2006
01-oktober-2006
1DGRPHãþD
SIST EN 554:2000
6WHULOL]DFLMDL]GHONRY]D]GUDYVWYHQRQHJR9ODåQDWRSORWDGHO=DKWHYH]D
UD]YRMYDOLGDFLMRLQUXWLQVNRNRQWURORVWHULOL]DFLMVNLKSRVWRSNRY]DPHGLFLQVNH
SULSRPRþNH ,62
Sterilization of health care products - Moist heat - Part 1: Requirements for the
development, validation and routine control of a sterilization process for medical devices
(ISO 17665-1:2006)
Sterilisation von Produkten für die Gesundheitsfürsorge - Feuchte Hitze - Teil 1:
Anforderungen an die Entwicklung, Validierung und Lenkung der Anwendung eines
Sterilisationsverfahrens für Medizinprodukte (ISO 17665-1:2006)
Stérilisation des produits de santé - Chaleur humide - Partie 1: Exigences pour le
développement, la validation et le contrôle de routine d'un procédé de stérilisation des
dispositifs médicaux (ISO 17665-1:2006)
Ta slovenski standard je istoveten z: EN ISO 17665-1:2006
ICS:
11.080.01 Sterilizacija in dezinfekcija na Sterilization and disinfection
splošno in general
SIST EN ISO 17665-1:2006 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN ISO 17665-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
August 2006
ICS 11.080.01 Supersedes EN 554:1994
English Version
Sterilization of health care products - Moist heat - Part 1:
Requirements for the development, validation and routine
control of a sterilization process for medical devices (ISO 17665-
1:2006)
Stérilisation des produits de santé - Chaleur humide - Sterilisation von Produkten für die Gesundheitsfürsorge -
Partie 1: Exigences pour le développement, la validation et Feuchte Hitze - Teil 1: Anforderungen an die Entwicklung,
le contrôle de routine d'un procédé de stérilisation des Validierung und Lenkung der Anwendung eines
dispositifs médicaux (ISO 17665-1:2006) Sterilisationsverfahrens für Medizinprodukte (ISO 17665-
1:2006)
This European Standard was approved by CEN on 14 July 2006.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national
standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official
versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2006 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 17665-1:2006: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------

EN ISO 17665-1:2006 (E)





Foreword


This document (EN ISO 17665-1:2006) has been prepared by Technical Committee ISO/TC 198
"Sterilization of health care products" in collaboration with Technical Committee CEN/TC 204
"Sterilization of medical devices", the secretariat of which is held by BSI.

This European Standard shall be given the status of a national standard, either by publication of an
identical text or by endorsement, at the latest by February 2007, and conflicting national standards
shall be withdrawn at the latest by August 2009.

This document supersedes EN 554:1994.

This document has been prepared under a mandate given to CEN by the European Commission
and the European Free Trade Association, and supports essential requirements of EU Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this
document.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the
following countries are bound to implement this European Standard: Austria, Belgium, Cyprus,
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland,
Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania,
Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.


Endorsement notice

The text of ISO 17665-1:2006 has been approved by CEN as EN ISO 17665-1:2006 without any
modifications.

2

---------------------- Page: 3 ----------------------

...

SLOVENSKI OSIST prEN ISO 17665:2004

PREDSTANDARD
oct 2004
Sterilization of health care products - Moist heat - Development, validation and
routine control of a sterilization process for medical devices (ISO/DIS 17665:2004)
ICS 11.080.01 Referenčna številka
OSIST prEN ISO 17665:2004(en;fr;de)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------
EUROPEAN STANDARD
DRAFT
prEN ISO 17665
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2004
ICS Will supersede EN 554:1994
English version
Sterilization of health care products - Moist heat - Development,
validation and routine control of a sterilization process for
medical devices (ISO/DIS 17665:2004)
Stérilisation des produits de santé - Chaleur humide -
Élaboration, validation et contrôle de routine d'un
processus de stérilisation des dispositifs médicaux
(ISO/DIS 17665:2004)
This draft European Standard is submitted to CEN members for parallel enquiry. It has been drawn up by the Technical Committee
CEN/TC 204.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations which
stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CEN member into its own language and notified to the Management Centre has the same
status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,
Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,
Slovenia, Spain, Sweden, Switzerland and United Kingdom.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without notice and
shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36  B-1050 Brussels
© 2004 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN ISO 17665:2004: E
worldwide for CEN national Members.

---------------------- Page: 2 ----------------------
prEN ISO 17665:2004 (E)




Foreword

This document (prEN ISO 17665:2004) has been prepared by Technical Committee ISO/TC
198 "Sterilization of health care products" in collaboration with Technical Committee CEN/TC
204 "Sterilization of medical devices", the secretariat of which is held by BSI.

This document is currently submitted to the parallel Enquiry.

This document will supersede EN 554:1994.

This document has been prepared under a mandate given to CEN by the European
Commission and the European Free Trade Association, and supports essential requirements
of EU Directive(s).

For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of
this document.


Endorsement notice

The text of ISO 17665:2004 has been approved by CEN as prEN ISO 17665:2004 without
any modifications.

2

---------------------- Page: 3 ----------------------
prEN ISO 17665:2004 (E)

ANNEX ZA
(informative)

Relationship between this European Standard and the
Essential Requirements of EU Directive 93/42 EEC

This European Standard has been prepared under a mandate given to CEN by the European

Commission and the European Free Trade Association to provide a means of conforming to
Essential Requirements of the New Approach Directive 93/42 EEC.

Once this standard is cited in the Official Journal of the European Communities under that
Directive and has been implemented as a national standard in at least one Member State,
compliance with the normative clauses of this standard given in Table ZA. confers, within the
limits of the scope of this standard, a presumption of conformity with the corresponding
Essential Requirements of that Directive and associated EFTA regulations.
WARNING: Other requirements and other EU Directives may be applicable to the product(s)
falling within the scope of this standard.



3

---------------------- Page: 4 ----------------------
DRAFT INTERNATIONAL STANDARD ISO/DIS 17665
ISO/TC 198 Secretariat: ANSI
Voting begins on: Voting terminates on:
2004-07-29 2004-12-29
INTERNATIONAL ORGANIZATION FOR STANDARDIZATION • МЕЖДУНАРОДНАЯ ОРГАНИЗАЦИЯ ПО СТАНДАРТИЗАЦИИ • ORGANISATION INTERNATIONALE DE NORMALISATION
Sterilization of health care products — Moist heat —
Development, validation and routine control of a sterilization
process for medical devices
Stérilisation des produits de santé — Chaleur humide — Élaboration, validation et contrô
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.