Protective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance

This European Standard specifies performance requirements for clothing materials and assembly methodology utilised in the manufacture of professional motorcycle riders jackets, trousers and one-piece and divided suits which are intended to protect the wearer against mechanical injury on metalled road surfaces.
This European Standard specifies appropriate test method for the determination of impact cut resistance.

Schutzkleidung für professionelle Motorradfahrer - Jacken, Hosen und ein- oder mehrteilige Anzüge - Teil 4: Prüfverfahren zur Bestimmung der Fallschnittfestigkeit

Diese Europäische Norm legt Leistungsanforderungen an Jacken, Hosen und ein- und zweiteilige Anzüge fest, die zum Schutz professioneller Motorradfahrer vor mechanischen Verletzungen auf Schotterstraßenbelägen vorgesehen sind.
Diese Europäische Norm legt das geeignete Prüfverfahren zur Bestimmung der Fallschnittfestigkeit fest.

Vêtements de protection pour les motocyclistes professionnels - Vestes, pantalons et combinaisons une ou deux pièces - Partie 4: Méthodes d'essai pour déterminer la résistance à la coupure par impact

La présente Norme européenne spécifie les exigences applicables aux matériaux des vêtements et à la méthodologie d'assemblage, utilisés dans la fabrication des vestes, pantalons et combinaisons une ou deux pièces réservés aux motocyclistes professionnels, qui sont conçus pour protéger la personne qui les porte de toute blessure d'origine mécanique sur les revêtements routiers.
La présente Norme européenne précise la méthode d'essai appropriée pour la détermination de la résistance à la coupure par impact.

Varovalna obleka za poklicne voznike motornih koles - Jopiči, hlače in enodelne ali večdelne obleke - 4. del: Preskusna metoda za ugotavljanje odpornosti proti urezu

General Information

Status
Withdrawn
Publication Date
16-Jul-2002
Withdrawal Date
25-Feb-2020
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
26-Feb-2020

Relations

Buy Standard

Standard
EN 13595-4:2002
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Schutzkleidung für professionelle Motorradfahrer - Jacken, Hosen und ein- oder mehrteilige Anzüge - Teil 4: Prüfverfahren zur Bestimmung der FallschnittfestigkeitVetements de protection pour les motocyclistes professionnels - Vestes, pantalons et combinaisons une ou deux pieces - Partie 4: Méthodes d'essai pour déterminer la résistance a la coupure par impactProtective clothing for professional motorcycle riders - Jackets, trousers and one-piece or divided suits - Part 4: Test method for determination of impact cut resistance43.140Motorna kolesa in mopediMotor cycles and mopeds13.340.10Varovalna oblekaProtective clothingICS:Ta slovenski standard je istoveten z:EN 13595-4:2002SIST EN 13595-4:2002en01-november-2002SIST EN 13595-4:2002SLOVENSKI
STANDARD



SIST EN 13595-4:2002



EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 13595-4July 2002ICS 13.340.10English versionProtective clothing for professional motorcycle riders - Jackets,trousers and one-piece or divided suits - Part 4: Test method fordetermination of impact cut resistanceVêtements de protection pour les motocyclistesprofessionnels - Vestes, pantalons et combinaisons une oudeux pièces - Partie 4: Méthodes d'essai pour déterminer larésistance à la coupure par impactSchutzkleidung für professionelle Motorradfahrer - Jacken,Hosen und ein- oder mehrteilige Anzüge - Teil 4:Prüfverfahren zur Bestimmung der FallschnittfestigkeitThis European Standard was approved by CEN on 5 April 2002.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the Management Centre has the same status as the officialversions.CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece,Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2002 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 13595-4:2002 ESIST EN 13595-4:2002



EN 13595-4:2002 (E)2ContentspageForeword.3Introduction.41Scope.42Normative references.43Terms and definitions.44Determination of impact cut resistance.54.1Principle.54.2Apparatus.54.3Preparation of test specimens.64.4Procedure.64.5Test report.7Annex ZA (informative)
Clauses of this European Standard addressing essential requirements orother provisions of EU Directives.8SIST EN 13595-4:2002



EN 13595-4:2002 (E)3ForewordThis document EN 13595-4:2002 has been prepared by Technical Committee CEN/TC 162 "Protective clothingincluding hand and arm protec
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.