EN 15507:2008
(Main)Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
Packaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades
This European Standard specifies material parameters, test requirements and procedures for the comparative testing of grades of high molecular weight high density polyethylene (PE-HD-HMW) and medium molecular weight high density polyethylene (PE-HD-MMW), used for the manufacture of packagings and IBCs for the transport of dangerous goods. It is intended to be used in conjunction with selective testing for packagings for liquids. The standard is not intended to be used for comparative testing of recycled plastics material.
NOTE This European Standard is intended to be used in conjunction with one or more of the international regulations set out in the Bibliography.
Verpackung - Verpackungen zur Beförderung gefährlicher Güter - Vergleichende Werkstoffprüfung von Polyethylensorten
Diese Europäische Norm legt Werkstoffkennwerte, Prüfanforderungen und Prüfverfahren für die
vergleichende Prüfung von Sorten hochmolekularen Polyethylens hoher Dichte (High Density Polyethylene –
PE-HD-HMW) und mittelmolekularen Polyethylens hoher Dichte (High Density Polyethylene – PE-HD-MMW),
für die Herstellung von Verpackungen und Großpackmitteln (IBC) für die Beförderung gefährlicher Güter fest.
Es ist vorgesehen, sie in Verbindung mit der selektiven Prüfung von Verpackungen für flüssige Stoffe
anzuwenden. Die Norm ist nicht für die vergleichende Prüfung von Recycling-Kunststoffen vorgesehen.
ANMERKUNG Diese Europäische Norm ist dafür gedacht, in Verbindung mit einer oder mehreren der in den Literaturhinweisen
aufgeführten internationalen Vorschriften angewendet zu werden.
Emballage - Emballages pour le transport des marchandises dangereuses - Essais comparatifs de diverses qualités de polyéthylène
La présente Norme européenne spécifie les paramètres des matériaux, les exigences et les modes opératoires d’essai permettant de procéder à des essais comparatifs des qualités de polyéthylène haute densité à poids moléculaire élevé (HDPE-HMW) et de polyéthylène haute densité à poids moléculaire moyen (HDPE-MMW) utilisées pour la fabrication d’emballages et de grands récipients pour vrac (GRV) destinés au transport de marchandises dangereuses. Elle est destinée à être associée à des essais sélectifs d’emballages de liquides. La norme n’est pas destinée aux essais comparatifs de matières plastiques recyclées.
NOTE 1 La présente Norme européenne est destinée à être associée à une ou plusieurs réglementations internationales mentionnées dans la Bibliographie.
Embalaža - Transportna embalaža za nevarne snovi - Preskušanje in primerjava kakovosti polietilena
General Information
Relations
Standards Content (Sample)
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Embalaža - Transportna embalaža za nevarne snovi - Preskušanje in primerjava kakovosti polietilenaVerpackung - Verpackungen zur Beförderung gefährlicher Güter - Vergleichende Werkstoffprüfung von PolyethylensortenEmballage - Emballages pour le transport des marchandises dangereuses - Essais comparatifs de diverses qualités de polyéthylenePackaging - Transport packaging for dangerous goods - Comparative material testing of polyethylene grades55.040SDNLUDQMHPackaging materials and accessories13.300Varstvo pred nevarnimi izdelkiProtection against dangerous goodsICS:Ta slovenski standard je istoveten z:EN 15507:2008SIST EN 15507:2009en,fr,de01-marec-2009SIST EN 15507:2009SLOVENSKI
STANDARD
EUROPEAN STANDARDNORME EUROPÉENNEEUROPÄISCHE NORMEN 15507December 2008ICS 13.300; 55.040 English VersionPackaging - Transport packaging for dangerous goods -Comparative material testing of polyethylene gradesEmballage - Emballages pour le transport desmarchandises dangereuses - Essais comparatifs dediverses qualités de polyéthylèneVerpackung - Verpackungen zur Beförderung gefährlicherGüter - Vergleichende Werkstoffprüfung vonPolyethylensortenThis European Standard was approved by CEN on 8 November 2008.CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this EuropeanStandard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the CEN Management Centre or to any CEN member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translationunder the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as theofficial versions.CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland,France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal,Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.EUROPEAN COMMITTEE FOR STANDARDIZATIONCOMITÉ EUROPÉEN DE NORMALISATIONEUROPÄISCHES KOMITEE FÜR NORMUNGManagement Centre: rue de Stassart, 36
B-1050 Brussels© 2008 CENAll rights of exploitation in any form and by any means reservedworldwide for CEN national Members.Ref. No. EN 15507:2008: ESIST EN 15507:2009
(ISO 16101:2004) EN ISO 16104, Packaging — Transport packaging for dangerous goods — Test methods (ISO 16104:2003) EN ISO 16467, Packaging — Transport packaging for dangerous goods — Test methods for IBCs
(ISO 16467:2003) The use of the test methods described in this European Standard is to facilitate usage in selective testing procedures, as described in Clause 8 eliminating or reducing the requirement to carry out the full test procedures described in the standards above each time a new grade of high density polyethylene is used for the manufacture of the same design type. The test requirements and procedures in the standards above for plastics packagings and IBCs meet the provisions set out in the multimodal United Nations Recommendations on the transport of Dangerous Goods [1]. These UN Recommendations are given legal entity by the provisions of a series of modal agreements and regulations for the international transport of dangerous goods, details of which can be found in the Bibliography. These international agreements include: the European Agreement concerning the International Carriage of Dangerous goods by Road (ADR), (covering most of Europe as well as parts of Asia and Northern Africa) [2]; the International Civil Aviation Organisation’s Technical Instructions for the Safe Transport of Dangerous Goods by Air (ICAO TIs), (world-wide) [3]; the International Maritime Dangerous Goods Code (IMDG Code), (world-wide) [4]; regulations concerning the International Carriage of dangerous Goods by Rail (RID), (covering most of Europe, parts of North Africa and the Middle East) [5]. The application of this standard will need to take account of the requirements of these international agreements and the relevant national regulations [6], [7] for domestic transport of dangerous goods. It is important to note that there will be certain modal differences from the UN Recommendations and that the schedule for revision of the UN Recommendations and modal provisions may lead to temporary inconsistencies with this European Standard, which is regularly updated to reflect the latest version of the UN Recommendations. This European Standard has been submitted for reference into the RID and/or the technical annexes of the ADR. SIST EN 15507:2009
This European Standard is intended to be used in conjunction with one or more of the international regulations set out in the Bibliography. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN ISO 179-1, Plastics — Determination of Charpy impact properties — Part 1: Non-instrumented impact test (ISO 179-1:2000) EN ISO 1133:2005, Plastics — Determination of the mass flow rate (MFR) and the melt volume flow rate (MVR) of thermoplastics (ISO 1133:2005) EN ISO 1183-1, Plastics — Methods for determining the density of non-cellular plastics — Part 1: Immersion method, liquid pyknometer method and titration method (ISO 1183-1:2004) EN ISO 1872-2:2007, Plastics — Polyethylene (PE) moulding and extrusion materials — Part 2: Preparation of test specimens and determination of properties (ISO 1872-2:2007) EN ISO 16101:2004, Packaging — Transport packaging for dangerous goods — Plastics compatibility testing (ISO 16101:2004) EN ISO 16104:2003, Packaging — Transport packaging for dangerous goods — Test methods
(ISO 16104:2003) EN ISO 16467:2003, Packaging — Transport packages for dangerous goods — Test methods for IBCs
(ISO 16467:2003) EN ISO 23667:2007, Packaging — Transport packages for dangerous goods — Rigid plastics and plastics composite IBCs — Compatibility testing (ISO 23667:2007) ISO 16770:2004, Plastics — Determination of environmental stress cracking (ESC) of polyethylene (PE) — Full-notch creep test (FNCT) 3 Terms and definitions For the purposes of this document, the terms and definitions given in Annex A of EN ISO 16101:2004 and the following apply: 3.1 high molecular weight high density polyethylene (PE-HD-HMW) natural Polyethylene with a density of > 940 kg/m3, when measured at 23 °C after annealing at 100 °C for
30 min, and a melt flow rate at 190 °C per 21,6 kg load of < 12 g / 600 s when measured according to
EN ISO 1133:2005, Condition G SIST EN 15507:2009
30 min, and a melt flow rate at 190 °C per 2,16 kg load of < 0,5 g per 600 s and > 0,1 g per 600 s in accordance with EN ISO 1133:2005, Condition D, or a melt flow rate at 190 °C per 5 kg load < 3,0 g per 600 s and > 0,5 g per 600 s in accordance with EN ISO 1133:2005, Condition T NOTE Natural Polyethylene refers to material with no pigments or colorants. 4 Test requirements 4.1 General When a manufacturer of a plastics packaging or IBC wants to change to a new grade of high density polyethylene for its manufacture, test results to the following requirements may be used in conjunction with a selective testing procedure to reduce the amount of design type testing of the design type with the new grade. As a minimum requirement, a test with water as the test medium in accordance with EN ISO 16104 or
EN ISO 16467 shall be carried out for the packaging design type manufactured from the new grade. The following test requirements in 4.2 to 4.6 shall be met in the comparative testing of the grade with existing approvals, (Material A), and the replacement grade, (Material B). The comparative testing of the grades to the procedures defined in 7.1 to 7.5 shall be carried out concurrently in a single laboratory.
For the procedures 7.2 to 7.5, test sheets (see 5.2) compression moulded by the same mould type (e.g. using a positive mould or semi-positive mould) shall be used. 4.2 Melt flow rate When tested in accordance with 7.1 the value of melt flow rate shall be within the following limits: MFR Material B
≥
70 % MFR Material A; MFR Material B ≤ 130 % MFR Material A. NOTE The determination of melt flow rate is solely intended as a classification test for the grade and does not relate to any of the tests for packaging described in EN ISO 16101, EN ISO 16104, EN ISO 16467 or EN ISO 23667. 4.3 Density When tested in accordance with 7.2 the density in kg/m3 shall be:
Density Material B (DB) ≥
Density Material A (DA
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.