Glass in building - Determination of thermal transmittance (U value) - Calculation method

This European Standard specifies a calculation method to determine the thermal transmittance of glazing with flat and parallel surfaces.
This European Standard applies to uncoated glass (including glass with structured surfaces, e.g. patterned glass), coated glass and materials not transparent in the far infrared which is the case for soda lime glass products, borosilicate glass and glass ceramic. It applies also to multiple glazing comprising such glasses and/or materials. It does not apply to multiple glazing which include in the gas space sheets or foils that are far infrared transparent. The procedure specified in this European Standard determines the U value ) (thermal transmittance) in the central area of glazing.
The edge effects due to the thermal bridge through the spacer of a sealed glazing unit or through the window frame are not included. Furthermore, energy transfer due to solar radiation is not taken into account. The effects of Georgian and other bars are excluded from the scope of this European Standard.
The Standard for the calculation of the overall U value of windows, doors and shutters (see A.1) gives normative reference to the U value calculated for the glazing components according to this standard.
For the purpose of product comparison, a vertical position of the glazing is specified. In addition, U values are calculated using the same procedure for other purposes, in particular for predicting:
-   heat loss through glazing;
-   conduction heat gains in summer;
-   condensation on glazing surfaces;
-   the effect of the absorbed solar radiation in determining the solar factor (see Clause 2).
Reference should be made to [3], [4] and [5] or other European Standards dealing with heat loss calculations for the application of glazing U values determined by this standard.
A procedure for the determination of emissivity is given in EN 12898.
The rules have been made as simple as possible consistent with accuracy.

Glas im Bauwesen - Bestimmung des Wärmedurchgangskoeffizienten (U-Wert) - Berechnungsverfahren

Dieses Dokument legt ein Berechnungsverfahren zur Bestimmung des Wärmedurchgangskoeffizienten von Verglasungen mit ebenen und parallelen Oberflächen fest.
Dieses Dokument gilt für unbeschichtetes Glas (einschließlich Glas mit strukturierter Oberfläche, z. B. Ornamentglas), beschichtetes Glas und für Materialien, die im fernen Infrarotbereich undurchlässig sind, z. B. Produkte aus Kalknatronglas, Borosilicatglas, Glaskeramik, Erdalkali-Silicatglas und Alumo-Silicatglas. Es gilt ebenfalls für Mehrfachverglasungen aus derartigen Gläsern und/oder Materialien. Für Mehrfachverglasungen mit Schichten oder Folien im Gaszwischenraum, die im fernen Infrarotbereich durchlässig sind, gilt dieses Dokument nicht.
Mit dem in dieser Europäischen Norm festgelegten Verfahren wird der U-Wert (Wärmedurchgangs-koeffizient) im mittleren Bereich einer Verglasung bestimmt.
Die Randwirkungen infolge der Wärmebrücke durch den Abstandhalter einer hermetisch abgeschlossenen Verglasung oder durch den Fensterrahmen sind nicht berücksichtigt. Die Wärmeübertragung durch Sonneneinstrahlung wurde ebenfalls nicht berücksichtigt. Die von Sprossen und anderen Leisten/Riegeln ausgehenden Einwirkungen fallen nicht in den Anwendungsbereich dieser Norm.
Der nach der vorliegenden Norm berechnete U-Wert für Verglasungselemente ist bei der Berechnung des Gesamt-U-Werts von Fernster, Türen und anderen Abschlüssen [1] zu verwenden.
Zum Zweck des Vergleichs von Produkten ist eine senkrechte Lage der Verglasung festgelegt. Zusätzlich werden nach demselben Verfahren U-Werte für weitere Zwecke berechnet, besonders für die Voraussage von:
- Wärmeverlusten durch Verglasungen;
- Erhöhungen der Wärmeleitung im Sommer;
- Tauwasserbildung auf Glasoberflächen;
- Auswirkungen der absorbierten Sonnenstrahlung auf die Bestimmung des Sonnenfaktors [2].
Bei der Anwendung von nach dieser Norm bestimmten U-Werten sollte auf [3], [4] und [5] oder weitere Europäische Normen, die sich mit Berechnungen von Wärmeverlusten befassen, Bezug genommen werden.
Weiterhin wird ein Verfahren für die Ermittlung des Emissionsvermögens in EN 12898:2019 angegeben.
Die Regeln wurden entsprechend der Genauigkeit so einfach wie möglich gestaltet.

Verre dans la construction - Détermination du coefficient de transmission thermique, U - Méthode de calcul

Le présent document spécifie une méthode de calcul du coefficient de transmission thermique des vitrages à surfaces planes et parallèles.
Le présent document est applicable au verre sans couche (y compris le verre avec surfaces structurées, par exemple le verre imprimé), au verre recouvert d’une couche et aux matériaux opaques au rayonnement infrarouge lointain, ce qui est le cas pour les produits verriers sodo-calciques, le verre borosilicate, les vitrocéramiques, le verre de silicate alcalino-terreux et le verre aluminosilicate. Il est également applicable aux vitrages multiples qui comportent de tels verres et/ou matériaux. Il n’est pas applicable aux vitrages multiples qui comportent dans la lame de gaz des panneaux ou feuilles transparents au rayonnement infrarouge de grande longueur d’onde.
La procédure spécifiée dans la présente Norme européenne permet de déterminer la valeur U (coefficient de transmission thermique) dans la zone centrale du vitrage.
Les effets de bord dus au pont thermique de l’intercalaire d’un vitrage isolant ou du châssis de fenêtre ne sont pas inclus. Par ailleurs, il n’est pas tenu compte du transfert d’énergie dû au rayonnement solaire. Les effets des croisillons insérés et autres barres sont exclus du domaine d’application de la présente norme.
La présente norme, qui permet de calculer la valeur U pour les composants verriers, est citée comme référence normative dans la norme relative au calcul du U global de fenêtres, portes et autres fermetures [1].
Pour faciliter la comparaison entre vitrages, ceux-ci sont spécifiés comme étant en position verticale. En outre, les valeurs U sont calculées à d’autres fins en utilisant la même procédure, en particulier pour la détermination des caractéristiques suivantes :
- perte de chaleur au travers des vitrages ;
- gains de chaleur par conduction en été ;
- condensation sur les surfaces des vitrages ;
- appréciation du rayonnement solaire absorbé dans la détermination du facteur solaire [2].
Il convient de se reporter à [3], [4] et [5] ou à d’autres Normes européennes concernant les calculs de déperditions thermiques pour l’application des valeurs U obtenues selon la présente norme.
Une procédure de détermination de l’émissivité est donnée dans l’EN 12898:2019.
Les règles ont été établies de manière à être les plus simples possible sans pour autant nuire à l’exactitude.

Steklo v gradbeništvu - Določanje toplotne prehodnosti (vrednost U) - Računska metoda

General Information

Status
Not Published
Publication Date
03-Nov-2024
Current Stage
4060 - Closure of enquiry - Enquiry
Start Date
16-Feb-2023
Due Date
11-Sep-2023
Completion Date
16-Feb-2023

Relations

Buy Standard

Draft
prEN 673:2023
English language
19 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
oSIST prEN 673:2023
01-februar-2023
Steklo v gradbeništvu - Določanje toplotne prehodnosti (vrednost U) - Računska
metoda
Glass in building - Determination of thermal transmittance (U value) - Calculation method
Glas im Bauwesen - Bestimmung des Wärmedurchgangskoeffizienten (U-Wert) -
Berechnungsverfahren
Verre dans la construction - Détermination du coefficient de transmission thermique, U -
Méthode de calcul
Ta slovenski standard je istoveten z: prEN 673
ICS:
81.040.20 Steklo v gradbeništvu Glass in building
oSIST prEN 673:2023 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 673:2023

---------------------- Page: 2 ----------------------
oSIST prEN 673:2023


DRAFT
EUROPEAN STANDARD
prEN 673
NORME EUROPÉENNE

EUROPÄISCHE NORM

November 2022
ICS Will supersede EN 673:2011
English Version

Glass in building - Determination of thermal transmittance
(U value) - Calculation method
Verre dans la construction - Détermination du Glas im Bauwesen - Bestimmung des
coefficient de transmission thermique, U - Méthode de Wärmedurchgangskoeffizienten (U-Wert) -
calcul Berechnungsverfahren
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 129.

If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.

Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.

Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.


EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 673:2022 E
worldwide for CEN national Members.

---------------------- Page: 3 ----------------------
oSIST prEN 673:2023
prEN 673:2022 (E)
Contents Page
European foreword . 3
1 Scope . 4
2 Normative references . 4
3 Terms and definitions . 5
4 Symbols, dimensionless numbers and subscripts . 5
4.1 Symbols . 5
4.2 Dimensionless Numbers . 6
4.3 Subscripts . 6
5 Basic formulae . 6
5.1 General. 6
5.2 U value . 6
5.3 Internal radiative heat transfer coefficient h .
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.