iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN ISO 9902-4:2001/A2:2014

(Amendment)

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014)

Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014)

2013-08-21 EMA: Draft for // vote received in ISO/CS (see notification of 2013-08-20 in dataservice).
2012-11-08 GVN: Draft for // ENQ available at ISO/CS (see notification in dataservice on 2012-11-07)

Textilmaschinen — Geräuschmessverfahren — Teil 4: Garnverarbeitungs-, Seilereiwaren- und Seilereimaschinen (ISO 9902-4:2001/Amd.2:2014)

Matériel pour l'industrie textile - Code d'essai acoustique - Partie 4: Machines de transformation du fil et machines de production de cordages et articles de corderie - Amendement 2 (ISO 9902-4:2001/Amd 2:2014)

Tekstilni stroji - Preskusni postopki za merjenje hrupa - 4. del: Stroji za predelavo preje in stroji za proizvodnjo sukanca in vlaken/niti - Dopolnilo A2 (ISO 9902-4:2001/Amd 2:2014)

4. del standarda dopolnjuje 1. del in skupaj z njim določa zahteve za priključitev, delovanje in merjenje, potrebne za merjenje, deklariranje in preverjanje hrupa, ki ga oddajajo različne vrste strojev za pripravo preje in predilnih strojev. Uporablja se za inženirske metode (razred 2) in raziskovalne metode (razred 3), opredeljene v navedenih standardih. Obravnava stroje za: – predelavo preje (npr. stroji za združevanje, sukanje in teksturiranje, stroji za odvijanje in navijanje preje, stroji za navijanje v klobčič) itd.

General Information

Status
Published
Publication Date
17-Jun-2014
Withdrawal Date
30-Dec-2014
ICS
17.140.20 - Noise emitted by machines and equipment
59.120.01 - Textile machinery in general
59.120.10 - Spinning, twisting and texturing machines
59.120.99 - Other textile machinery
Technical Committee
CEN/TC 214 - Textile machinery and allied machinery
Drafting Committee
CEN/TC 214/WG 4 - Measurement and reduction of noise
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Start Date
18-Jun-2014
Completion Date
18-Jun-2014
Directive
2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
Mandate
M/BC/CEN/88/13 - Standardization request to CEN/CENELEC relating to machinery
Ref Project
SIST EN ISO 9902-4:2002/A2:2014 - Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014)

Relations

Amends
EN ISO 9902-4:2001 - Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery (ISO 9902-4:2001)
Effective Date
08-Oct-2012
EN ISO 9902-4:2002/A2:2014EN ISO 9902-4:2002/A2:2014
PreviousNext
Amendment
EN ISO 9902-4:2002/A2:2014
English language
8 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-september-2014
Tekstilni stroji - Preskusni postopki za merjenje hrupa - 4. del: Stroji za predelavo
preje in stroji za proizvodnjo sukanca in vlaken/niti - Dopolnilo A2 (ISO 9902-
4:2001/Amd 2:2014)
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope
manufacturing machinery - Amendment 2 (ISO 9902-4:2001/Amd 2:2014)
Textilmaschinen - Geräuschmessverfahren - Teil 4: Garnverarbeitungs-, Seilereiwaren-
und Seilereimaschinen - Änderung 2 (ISO 9902-4:2001/Amd 2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Partie 4: Machines de
transformation du fil et machines de production de cordages et articles de corderie -
Amendement 2 (ISO 9902-4:2001/Amd 2:2014)
Ta slovenski standard je istoveten z: EN ISO 9902-4:2001/A2:2014
ICS:
17.140.20 Emisija hrupa naprav in Noise emitted by machines
opreme and equipment
59.120.01 Tekstilni stroji na splošno Textile machinery in general
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN ISO 9902-4:2001/A2
NORME EUROPÉENNE
EUROPÄISCHE NORM
June 2014
ICS 17.140.20; 59.120.10
English Version
Textile machinery - Noise test code - Part 4: Yarn processing,
cordage and rope manufacturing machinery - Amendment 2
(ISO 9902-4:2001/Amd 2:2014)
Matériel pour l'industrie textile - Code d'essai acoustique - Textilmaschinen - Geräuschmessverfahren - Teil 4:
Partie 4: Machines de transformation du fil et machines de Garnverarbeitungs-, Seilereiwaren- und Seilereimaschinen -
production de cordages et articles de corderie - Änderung 2 (ISO 9902-4:2001/Amd 2:2014)
Amendement 2 (ISO 9902-4:2001/Amd 2:2014)
This amendment A2 modifies the European Standard EN ISO 9902-4:2001; it was approved by CEN on 7 May 2014.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for inclusion of this
amendment into the relevant national standard without any alteration. Up-to-date lists and bibliographical references concerning such
national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN member.

This amendment exists in three official versions (English, French, German). A version in any other language made by translation under the
responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United
Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION

EUROPÄISCHES KOMITEE FÜR NORMUNG

CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2014 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 9902-4:2001/A2:2014 E
worldwide for CEN national Members.

Contents Page
Foreword .3
Annex ZA (informative) Relationship between this European Standard and the Essential
Requirements of EU Directive 2006/42/EC .4
Foreword
This document (EN ISO 9902-4:2001/A2:2014) has been prepared by Technical Committee ISO/TC 72
"Textile machinery and accessories" in collaboration with Technical Committee CEN/TC 214 “Textile
machinery and accessories” the secretariat of which is held by SNV.
This Amendment to the European Standard EN ISO 9902-4:2001 shall be given the status of a national
standard, either by publication of an identical text or by endorsement, at the latest by December 2014, and
conflicting national standards shall be withdrawn at the latest by December 2014.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. CEN [and/or CENELEC] shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association, and supports essential requirements of EU Directive(s).
For relationship with EU Directive(s), see informative Annex ZA, which is an integral part of this document.
According to the CEN-CENELEC Internal Regulations, the national standards organizations of the following
countries are bound to implement this European Standard: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech
Republic, Denmark, Estonia, Finland, Former Yugoslav Repub
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN ISO 9902-4:2001/A1:2009(Amendment)
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1 (ISO 9902-4:2001/Amd 1:2009)
SIST EN ISO 9902-4:2002/A1:2009

This Part 4 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines for: - yarn processing (e.g. doubling, twisting and texturing machines, reeling and winding machines, ball winding machines); etc.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 9902-4:2001/A1:2009(Amendment)
Textile machinery - Noise test code - Part 4: Yarn processing, cordage and rope manufacturing machinery - Amendment 1 (ISO 9902-4:2001/Amd 1:2009)
SIST EN ISO 9902-4:2002/A1:2009

This Part 4 of the standard is a complement to Part 1 and specifies, together with it, the mounting, operating and measuring conditions required for the measurement, declaration and verification of noise emitted by different types of spinning preparatory and spinning machines. It is applicable to engineering methods (grade 2) and survey methods (grade 3) defined in the standards referred to. It concerns machines for: - yarn processing (e.g. doubling, twisting and texturing machines, reeling and winding machines, ball winding machines); etc.

  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 15004-2:2025(Main)
Fixed firefighting systems - Gas extinguishing systems - Part 2: Physical properties and system design of gas extinguishing systems for FK-5-1-12 extinguishant (ISO 14520-5:2024, modified)
oSIST prEN 15004-2:2025

This document specifies requirements for gaseous fire-extinguishing systems, with respect to FK-5-1-12 extinguishant. It includes details of physical properties, specification, usage and safety aspects.
This document is applicable only to systems operating at nominal pressures of 25 bar, 34,5 bar, 42 bar, 50 bar and 70 bar1 with nitrogen propellant. This does not preclude the use of other systems.
1   1 bar = 0,1 MPa = 105 Pa; 1 MPa = 1 N/mm².

  • Draft
    15 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 7730:2025(Main)
Ergonomics of the thermal environment - Analytical determination and interpretation of thermal comfort using calculation of the PMV and PPD indices and local thermal comfort criteria (ISO 7730:2025)
kSIST FprEN ISO 7730:2025

This document specifies a method to evaluate the general thermal comfort of people in a space and the degree of discomfort (thermal dissatisfaction) of people exposed to moderate thermal environments. It defines the analytical determination and interpretation of thermal comfort using calculation of predicted mean vote (PMV) and predicted percentage of dissatisfied (PPD) and local thermal comfort criteria, giving the environmental conditions considered acceptable for general thermal comfort as well as those representing local discomfort.
It is applicable to healthy men and women exposed to indoor environments where thermal comfort is desirable, but where moderate deviations from thermal comfort occur, in the design of new environments or the assessment of existing ones.
Although developed specifically for the work environment, this document is applicable to other kinds of environment as well.

  • Draft
    39 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 27269:2025(Main)
Health informatics - International patient summary (ISO 27269:2025)
kSIST FprEN ISO 27269:2025

This document defines the core data set for a concise international patient summary (IPS), which supports continuity of care for a person and assists with coordination of their care.
This document provides an abstract definition of a patient summary from which derived models are implementable.
This document does not cover the workflow processes of data entry, data collection, data summarization, subsequent data presentation, assimilation, or aggregation. Furthermore, this document does not cover the summarization act itself, i.e. the intelligence, skills and competences, that results in the data summarization workflow. It is not an implementation guide that is concerned with the various technical layers beneath the application layer. Representation by various coding schemes, additional structures and terminologies are not part of this document.

  • Draft
    79 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17829:2025(Main)
Solid biofuels - Determination of length and diameter of pellets (ISO 17829:2025)
kSIST FprEN ISO 17829:2025

This document specifies the methods for determination of the diameter and length of pellets. Concerning the pellet length, methods for the determination of fractions of specified lengths, such as pellets > 40 mm and particles < 10 mm and for determination of the average length are included.

  • Draft
    17 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 12369-2:2025(Main)
Wood-based panels - Characteristic values for structural design - Part 2: Plywood
kSIST FprEN 12369-2:2025

This document provides information on the characteristic values for use in designing structures incorporating wood-based panels. The characteristic values given are as defined in EN 1995 1 1.
When utilizing the classification system for derivation of plywood characteristic values, this document can only be applied with reference to EN 636.
This document includes the characteristic values of the mechanical properties for plywood complying with EN 636 in bending, tension, compression, panel shear and planar shear. EN 636 classifies bending properties into two sets of classes, one for stiffness and another for strength. Stiffness and strength in tension and compression are related to the same properties in bending.
For shear properties, fixed values determined by correlation to density are provided.
Where optimized values are needed, the characteristic values are determined directly by testing in accordance with EN 789 and EN 1058 or by combination of testing according to the latter two standards and calculation according to EN 14272.
This document applies to panels complying with the three following conditions:
—   5 layers or more and 6 mm overall thickness and more;
—   the ratio of the cumulative thickness of veneers in alternate directions does not exceed 2.5;
—   wood species with a mean density greater than 350 kg/m3 and not exceeding 750 kg/m3.

  • Draft
    20 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1998-3:2025(Main)
Eurocode 8 - Design of structures for earthquake resistance - Part 3: Assessment and retrofitting of buildings and bridges
kSIST FprEN 1998-3:2025

1.1   Scope of EN 1998-3
(1)   This document is applicable to the assessment and retrofitting of buildings and bridges in seismic regions, namely as given in a) to c):
a)   to provide criteria for the assessment of the seismic performance of existing individual buildings and bridges;
b)   to describe the procedure to be followed in selecting necessary corrective measures;
c)   to set forth criteria for the design of retrofitting measures (i.e. design, structural analysis including intervention measures, final dimensioning of structural parts and their connections to existing structural members).
NOTE 1   For the purposes of this document, retrofitting covers both the seismic upgrading (e.g. strengthening or adding a passive system) of undamaged structures and the repair and possible upgrading of earthquake-damaged structures.
NOTE 2   Only the most common retrofit techniques are covered in this document. This does not exclude the use of other techniques, which can be developed in each country, based on the strengthening principles of this document.
NOTE 3   Annex D gives flowcharts for the application of this document.
(2)   Unless specifically stated, EN 1998-1-1 and EN 1998-5 apply.
(3)   Reflecting the performance requirements of EN 1998-1-1:2024, 4.1, this document covers the seismic assessment and retrofitting of buildings and bridges made of the more commonly used structural materials: concrete, steel and composite, timber and masonry.
NOTE   Annexes B and C contain additional guidance related to the assessment of timber and masonry structures, respectively, and to their retrofitting when necessary.
(4)   This document is intended for the assessment of individual structures, to decide on the need for structural intervention and to design the retrofitting measures that may be necessary. It is not intended for the vulnerability assessment of populations or groups of structures in seismic risk evaluations for various purposes (e.g. for determining insurance risk, for setting risk mitigation priorities, etc.).
(5)   This document provides (in its material-specific Clauses 8 to 11) criteria for the verification of the more common retrofitting techniques currently in use.
(6)   This document gives specific rules for the assessment and retrofitting relevant to existing buildings and bridges of consequence classes CC1, CC2 and CC3, as defined in EN 1990:2023, 4.3.
(7)   Although the provisions of this document are applicable to all common categories of buildings and bridges, the seismic assessment and retrofitting of monuments and heritage structures often requires different types of provisions and approaches, depending on the nature of the monuments and heritage structures.
1.2   Assumptions
(1)   The assumptions of EN 1998-1-1 apply to this document.
(2)   The provisions of this document assume that the data collection and tests are performed by experienced personnel and that the engineer responsible for the assessment, the possible design of the retrofitting and the execution of work has appropriate experience of the type of structures being upgraded or repaired.
(3)   It is assumed that inspection procedures, checklists and other data-collection procedures will be documented and filed and referred to in the assessment/design documents.

  • Draft
    201 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN ISO 17662:2025(Main)
Welding - Calibration, verification and validation of equipment used for welding, including ancillary activities (ISO 17662:2025)
SIST EN ISO 17662:2025

This document specifies requirements for calibration, verification and validation of equipment used for:
—     control of process variables during fabrication,
—     control of the properties of equipment used for welding or welding allied processes,
where the resulting output cannot be readily or economically documented by subsequent monitoring, inspection and testing. This involves process variables influencing the fitness-for-purpose and in particular the safety of the fabricated product.
NOTE            This document is based on the lists of process variables stated in International Standards for specification of welding procedures, in particular, but not exclusively in the ISO 15609 series. Future revisions of these International Standards can result in addition or deletion of parameters considered necessary to specify.
Some guidance is, in addition, given in Annex B for requirements for calibration, verification and validation as part of acceptance testing of equipment used for welding or allied processes.
This document does not specify requirements to calibrate, verify and validate as part of inspection, testing, non-destructive testing or measuring of final welded products performed in order to verify product conformance.
This document applies only to calibration, verification and validation of equipment for use in production or on site.
This document does not apply to the manufacture and installation of equipment for welding. Requirements for new equipment are formulated in directives and product codes (standards), as necessary.
Annex C provides information when other parties are involved in calibration, verification and validation activities.

  • Draft
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 1995-1-2:2025(Main)
Eurocode 5 - Design of timber structures - Part 1-2: Structural fire design
kSIST FprEN 1995-1-2:2025

1.1   Scope of EN 1995-1-2
(1) This document deals with the design of timber structures for the accidental situation of fire exposure and it is intended to be used in conjunction with EN 1995-1-1 and EN 1991-1-2.
This document only identifies differences from, or supplements to, normal temperature design.
(2) This document applies to timber structures required to fulfil a loadbearing function, separating function or both.
(3) This document gives principles and application rules for the design of structures for specified requirements in respect of the aforementioned functions and the levels of performance.
(4) This document applies to structures, or parts of structures, that are within the scope of EN 1995-1-1 and are designed accordingly.
(5) The methods given in this document are applicable to all products covered by European technical product specifications made reference to in this document.
1.2   Assumptions
(1) In addition to the general assumptions of EN 1990, the following assumptions apply:
-   the choice of the relevant design fire scenario is made by appropriate qualified and experienced personnel, or is given by the relevant national regulation;
-   any fire protection measure taken into account in the design will be adequately maintained.

  • Draft
    180 pages
    English language
    sale 10% off
    e-Library read for
    1 day