Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round, cylindrical and tapered general use metal containers up to 40 000 ml

This European Standard specifies the range of nominal filling volumes in common use for round cylindrical and tapered general use containers of up to 40 000 ml volumetric capacity, metal thickness not exceeding 0,49 mm nominal.
Recommended diameters related to this range of nominal filling volumes are shown in an Annex A to this European Standard.

Verpackungen - Feinstblechverpackungen - Teil 1: Nennfüllvolumen von runden, zylindrischen und konischen wiederverschließbaren Behältern bis 40 00 ml

Diese Europäische Norm legt die Bandbreite der gebräuchlichen Nennfüllvolumen von runden, zylindrischen
und konischen wiederverschließbaren Behältern mit einem Volumen von bis zu 40 000 ml und einer Nenn-Metalldicke
von maximal 0,49 mm fest.
Anhang A dieser Europäischen Norm enthält die zu dieser Bandbreite an Nennfüllvolumen empfohlenen
Durchmesser.

Emballage - Emballages métalliques légers - Partie 1: Volumes nominaux de remplissage des récipients métalliques cylindriques, ronds et coniques à usage géneral d'un volume inférieur ou égal à 40 000 ml

La présente Norme européenne spécifie la gamme de volumes nominaux de remplissage couramment
utilisée pour les récipients ronds, cylindriques et coniques à usage général d’un volume inférieur ou égal à 40
000 ml, d’une épaisseur nominale de métal ne dépassant pas 0,49 mm.
Les diamètres recommandés en liaison avec la gamme de volumes nominaux de remplissage sont présentés
à l’Annexe A de la présente Norme européenne.

Embalaža - Pločevinke - 1. del: Nazivna polnilna prostornina za okrogle, valjaste in konične splošno uporabne kovinske posode do 40.000 ml

General Information

Status
Published
Publication Date
01-Nov-2005
Current Stage
9093 - Decision to confirm - Review Enquiry

RELATIONS

Buy Standard

Standard
EN 13025-1:2006
English language
9 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN 13025-1:2006
01-februar-2006
1DGRPHãþD
SIST EN 13025:2001

(PEDODåD3ORþHYLQNHGHO1D]LYQDSROQLOQDSURVWRUQLQD]DRNURJOHYDOMDVWHLQ

NRQLþQHVSORãQRXSRUDEQHNRYLQVNHSRVRGHGRPO

Packaging - Light gauge metal containers - Part 1: Nominal filling volumes for round,

cylindrical and tapered general use metal containers up to 40 000 ml
Verpackungen - Feinstblechverpackungen - Teil 1: Nennfüllvolumen von runden,
zylindrischen und konischen wiederverschließbaren Behältern bis 40 000 ml
Emballage - Emballages métalliques légers - Partie 1: Volumes nominaux de

remplissage des récipients métalliques cylindriques, ronds et coniques a usage géneral

d'un volume inférieur ou égal a 40 000 ml
Ta slovenski standard je istoveten z: EN 13025-1:2005
ICS:
55.120 3ORþHYLQNH7XEH Cans. Tins. Tubes
SIST EN 13025-1:2006 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN 13025-1:2006
---------------------- Page: 2 ----------------------
SIST EN 13025-1:2006
EUROPEAN STANDARD
EN 13025-1
NORME EUROPÉENNE
EUROPÄISCHE NORM
November 2005
ICS 55.120; 55.140 Supersedes EN 13025:2000
English Version
Packaging - Light gauge metal containers - Part 1: Nominal
filling volumes for round, cylindrical and tapered general use
metal containers up to 40 000 ml

Emballage - Emballages métalliques légers - Partie 1: Verpackungen - Feinstblechverpackungen - Teil 1:

Volumes nominaux de remplissage des récipients Nennfüllvolumen von runden, zylindrischen und konischen

métalliques cylindriques, ronds et coniques à usage wiederverschließbaren Behältern bis 40 00 ml

géneral d'un volume inférieur ou égal à 40 000 ml
This European Standard was approved by CEN on 12 September 2005.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European

Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national

standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation

under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official

versions.

CEN members are the national standards bodies of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France,

Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia,

Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre: rue de Stassart, 36 B-1050 Brussels

© 2005 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN 13025-1:2005: E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN 13025-1:2006
EN 13025-1:2005 (E)
Contents Page

Foreword ..........................................................................................................................................................3

Introduction......................................................................................................................................................4

1 Scope ...................................................................................................................................................5

2 Nominal filling volumes......................................................................................................................5

3 Drainability ..........................................................................................................................................5

Annex A (informative) Recommended nominal diameters of round cylindrical and tapered

general use metal containers of up to 40 000 ml..............................................................................6

Annex B (normative) Draining test methods for general use metal containers and drums......................7

Bibliography.....................................................................................................................................................9

---------------------- Page: 4 ----------------------
SIST EN 13025-1:2006
EN 13025-1:2005 (E)
Foreword

This European Standard (EN 13025-1:2005) has been prepared by Technical Committee CEN/TC 261

“Packaging”, the secretariat of which is held by AFNOR.

This European Standard shall be given the status of a national standard, either by publication of an identical

text or by endorsement, at the latest by May 2006, and conflicting national standards shall be withdrawn at the

latest by May 2006.
This European Standard supersedes EN 13025:2000.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following

countries are bound to implement this European Standard: Austria, Belgium, Cyprus, Czech Republic,

Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,

Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland

and United Kingdom.
---------------------- Page: 5 ----------------------
SIST EN 13025-1:2006
EN 13025-1:2005 (E)
Introduction

Efficient packaging is of great importance for the distribution and the protection of goods. Insufficient or

inappropriate packaging can lead to damage or wastage of the contents of the pack.

NOTE Part 1 of this European Standard is a generic representation of the range of light metal containers of the given

diameters to a maximum capacity of 40 000 ml.

Further parts may be added to this European Standard to impart more specific detail of different container

types. Such additional parts, however, will remain within the parameters of Part 1.

Annex A on the recommended nominal diameters of round cylindrical and tapered general use metal

containers of up to 40 000 ml is for information only. Annex B on test methods for drainability is normative.

The Bibliography gives reference to Standards useful in the manufacture of light gauge metal packaging.

---------------------- Page: 6 ----------------------
SIST EN 13025-1:2006
EN 13025-1:2005 (E)
1 Scope

This European Standard specifies the range of nominal filling volumes in common use for round cylindrical

and tapered general use containers of up to 40 000 ml volumetric capacity, metal thickness not exceeding

0,49 mm nominal.

Recommended diameters related to this range of nominal filling volumes are shown in an Annex A to this

European Standard.
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.