EN 14678-1:2006+A1:2009

LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers

This European Standard covers the requirements for the design, manufacture, testing and marking of LPG dispensers for automotive LPG filling stations with a design pressure of 25 bar (2 500 KPa), where the piping has a maximum DN 40 and any vessel fitted that has a volume less than 2 litres.  This standard does not cover dispensers with integral pumps.
NOTE   This standard may also be used for piping greater than DN 40 and/or vessels greater than 2 litres, but then  the PED should be consulted.
This standard also covers the requirements for the LPG parts in multi-fuel dispensers.

Flüssiggas-Geräte und Ausrüstungsteile - Bau- und Arbeitsweise von Flüssiggas-Geräten für Autogas-Tankstellen - Teil 1: Zapfsäulen

Equipements pour GPL et leurs accessoires - Construction et caractéristiques des équipements GPL dans les stations-service - Partie 1: Distributeurs

La présente Norme européenne traite des exigences relatives à la conception, à la construction, aux essais et au
marquage des distributeurs de GPL pour stations-service délivrant du GPL carburant ayant une pression maximale
admissible de 25 bar (2 500 kPa), lorsque la DN de la tuyauterie est au maximum égale à 40 et que tout récipient
installé a un volume inférieur à 2 l. La présente norme ne traite pas des distributeurs munis de pompes intégrées.
NOTE La présente norme peut également être utilisée pour des tuyauteries plus grandes que DN 40 et/ou pour des
récipients de volume supérieur à 2 l, mais il convient alors de consulter la DESP.
La présente norme traite également des exigences relatives aux parties GPL dans les distributeurs multi-carburants.

Oprema in pribor za UNP - Izdelava in lastnosti opreme za UNP za bencinske servise - 1. del: Naprave za točenje goriva

General Information

• Status: Withdrawn
• Publication Date: 21-Apr-2009
• Withdrawal Date: 19-Mar-2013
• ICS: 75.200 - Petroleum products and natural gas handling equipment
• Technical Committee: CEN/TC 286 - Liquefied petroleum gas equipment and accessories
• Drafting Committee: CEN/TC 286/WG 6 - Automative LPG system
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Mar-2013
• Completion Date: 20-Mar-2013
• Directive: 94/9/EC - Directive 94/9/EC of the European Parliament and the Council of 23 March 1994 on the approximation of the laws of the Member States concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Mandate: M/BC/CEN/92/46 - Standardization mandate assigned to CEN/CENELEC concerning equipment and protective systems intended for use in potentially explosive atmospheres
• Ref Project: SIST EN 14678-1:2006+A1:2009 - LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers

Relations

• Merged From: EN 14678-1:2006 - LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
• Effective Date: 18-Jan-2023
• Replaced By: EN 14678-1:2013 - LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
• Effective Date: 27-Mar-2013

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.EHQFLQVNHFlüssiggas-Geräte und Ausrüstungsteile - Bau- und Arbeitsweise von Flüssiggas-Geräten für Autogas-Tankstellen - Teil 1: ZapfsäulenEquipements pour GPL et leurs accessoires - Construction et caractéristiques des équipements GPL dans les stations-service - Partie 1: DistributeursLPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers75.200Petroleum products and natural gas handling equipmentICS:Ta slovenski standard je istoveten z:EN 14678-1:2006+A1:2009SIST EN 14678-1:2006+A1:2009en,fr01-junij-2009SIST EN 14678-1:2006+A1:2009SLOVENSKI
STANDARDSIST EN 14678-1:20061DGRPHãþD



SIST EN 14678-1:2006+A1:2009



EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN 14678-1:2006+A1
April 2009 ICS 75.200 Supersedes EN 14678-1:2006English Version
LPG equipment and accessories - Construction and performance of LPG equipment for automotive filling stations - Part 1: Dispensers
Equipements pour GPL et leurs accessoires - Construction et caractéristiques des équipements GPL dans les stations-service - Partie 1: Distributeurs
Flüssiggas-Geräte und Ausrüstungsteile - Bau- und Arbeitsweise von Flüssiggas-Geräten für Autogas-Tankstellen - Teil 1: Zapfsäulen This European Standard was approved by CEN on 9 January 2006 and includes Amendment 1 approved by CEN on 21 March 2009.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN Management Centre or to any CEN member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the CEN Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION EUROPÄISCHES KOMITEE FÜR NORMUNG
Management Centre:
Avenue Marnix 17,
B-1000 Brussels © 2009 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members. Ref. No. EN 14678-1:2006+A1:2009: ESIST EN 14678-1:2006+A1:2009



EN 14678-1:2006+A1:2009 (E) 2 Contents Page Foreword . 4 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Requirements . 7 4.1 Electrical equipment . 7 4.1.1 General . 7 4.1.2 Cabling insulation resistance . 7 4.1.3 Cables used in hazardous area . 8 4.1.4 Dead man push button . 8 4.1.5 Insulation and isolation . 8 4.1.6 Chemical cells in non-hazardous areas . 8 4.2 Design . 9 4.2.1 Design pressure .
...