Technical product documentation (TPD) - Technical drawings for glassware (ISO 6414:2020)

This document establishes rules and conventions for particular use with technical drawings on glassware, for example, laboratory glassware or glassware used in other technical fields.
Optical parts are not, however, included herein.

Technische Produktdokumentation (TPD) - Technische Zeichnungen für Glasgeräte (ISO 6414:2020)

Dieses Dokument legt Regeln und Vereinbarungen für den besonderen Gebrauch von technischen Zeichnungen für Glasgeräte fest, z. B. Laborgeräte aus Glas oder Glasgeräte für den Einsatz in anderen technischen Bereichen.
Optische Teile sind in dieser Norm jedoch nicht enthalten.

Documentation technique de produits (DTP) - Dessins techniques de verrerie (ISO 6414:2020)

Le présent document établit des règles et des conventions à l'usage particulier des dessins techniques de la verrerie, par exemple la verrerie de laboratoire, ou la verrerie utilisée dans d'autres domaines techniques.
Toutefois, les parties optiques ne sont pas incluses.

Tehnična dokumentacija izdelkov - Tehnične risbe za steklenino (ISO 6414:2020)

Standard EN-ISO 6414 vzpostavlja pravila in konvencije za posebno uporabo s tehničnimi risbami na steklenini (npr. laboratorijski steklovini ali steklovini, ki se uporablja na drugih tehničnih področjih). Optični deli v tem standardu niso zajeti.

General Information

Status
Published
Publication Date
28-Jan-2020
Current Stage
6060 - Definitive text made available (DAV) - Publishing
Due Date
29-Jan-2020
Completion Date
29-Jan-2020

RELATIONS

Buy Standard

Standard
EN ISO 6414:2020
English language
21 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (sample)

SLOVENSKI STANDARD
SIST EN ISO 6414:2020
01-marec-2020
Nadomešča:
SIST EN ISO 6414:1998
Tehnična dokumentacija izdelkov - Tehnične risbe za steklenino (ISO 6414:2020)
Technical product documentation (TPD) - Technical drawings for glassware (ISO
6414:2020)

Technische Produktdokumentation (TPD) - Technische Zeichnungen für Glasgeräte (ISO

6414:2020)
Documentation technique de produits (DTP) - Dessins techniques de verrerie (ISO
6414:2020)
Ta slovenski standard je istoveten z: EN ISO 6414:2020
ICS:
01.110 Tehnična dokumentacija za Technical product
izdelke documentation
81.040.30 Izdelki iz stekla Glass products
SIST EN ISO 6414:2020 en,fr,de

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN ISO 6414:2020
---------------------- Page: 2 ----------------------
SIST EN ISO 6414:2020
EN ISO 6414
EUROPEAN STANDARD
NORME EUROPÉENNE
January 2020
EUROPÄISCHE NORM
ICS 01.100.99 Supersedes EN ISO 6414:1994
English Version
Technical product documentation (TPD) - Technical
drawings for glassware (ISO 6414:2020)

Documentation technique de produits (DTP) - Dessins Technische Produktdokumentation (TPD) - Technische

techniques de verrerie (ISO 6414:2020) Zeichnungen für Glasgeräte (ISO 6414:2020)

This European Standard was approved by CEN on 6 January 2020.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this

European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references

concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CEN

member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by

translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC Management

Centre has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,

Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,

Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and

United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

© 2020 CEN All rights of exploitation in any form and by any means reserved Ref. No. EN ISO 6414:2020 E

worldwide for CEN national Members.
---------------------- Page: 3 ----------------------
SIST EN ISO 6414:2020
EN ISO 6414:2020 (E)
Contents Page

European foreword ....................................................................................................................................................... 3

---------------------- Page: 4 ----------------------
SIST EN ISO 6414:2020
EN ISO 6414:2020 (E)
European foreword

This document (EN ISO 6414:2020) has been prepared by Technical Committee ISO/TC 10 "Technical

product documentation" in collaboration with Technical Committee CEN/SS F01 “Technical drawings”

the secretariat of which is held by CCMC.

This European Standard shall be given the status of a national standard, either by publication of an

identical text or by endorsement, at the latest by July 2020, and conflicting national standards shall be

withdrawn at the latest by July 2020.

Attention is drawn to the possibility that some of the elements of this document may be the subject of

patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes EN ISO 6414:1994.

According to the CEN-CENELEC Internal Regulations, the national standards organizations of the

following countries are bound to implement this European Standard: Austria, Belgium, Bulgaria,

Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland,

Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of

North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the

United Kingdom.
Endorsement notice

The text of ISO 6414:2020 has been approved by CEN as EN ISO 6414:2020 without any modification.

---------------------- Page: 5 ----------------------
SIST EN ISO 6414:2020
---------------------- Page: 6 ----------------------
SIST EN ISO 6414:2020
INTERNATIONAL ISO
STANDARD 6414
Second edition
2020-01
Technical product documentation
(TPD) — Technical drawings for
glassware
Documentation technique de produits (DTP) — Dessins techniques de
verrerie
Reference number
ISO 6414:2020(E)
ISO 2020
---------------------- Page: 7 ----------------------
SIST EN ISO 6414:2020
ISO 6414:2020(E)
COPYRIGHT PROTECTED DOCUMENT
© ISO 2020

All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may

be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting

on the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address

below or ISO’s member body in the country of the requester.
ISO copyright office
CP 401 • Ch. de Blandonnet 8
CH-1214 Vernier, Geneva
Phone: +41 22 749 01 11
Fax: +41 22 749 09 47
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland
ii © ISO 2020 – All rights reserved
---------------------- Page: 8 ----------------------
SIST EN ISO 6414:2020
ISO 6414:2020(E)
Contents Page

Foreword ........................................................................................................................................................................................................................................iv

Introduction ..................................................................................................................................................................................................................................v

1 Scope ................................................................................................................................................................................................................................. 1

2 Normative references ...................................................................................................................................................................................... 1

3 Terms and definitions ..................................................................................................................................................................................... 1

4 General ............................................................................................................................................................................................................................ 1

5 Sections .......................................................................................................................................................................................................................... 2

5.1 Small sections........................................................................................................................................................................................... 2

5.2 The combination of different materials ............................................................................................................................. 3

6 Special glassware indications ................................................................................................................................................................. 3

6.1 Interchangeable conical ground joint ................................................................................................................................. 3

6.2 Interchangeable spherical ground joint ............................................................................................................................ 3

7 Thin walls ..................................................................................................................................................................................................................... 4

7.1 Drawing of wall thickness ............................................................................................................................................................. 4

7.2 Indication of diameter ...................................................................................................................................................................... 6

8 Tubes ................................................................................................................................................................................................................................ 7

8.1 Ends of tubes ............................................................................................................................................................................................ 7

8.2 Simplified coiled tubes ..................................................................................................................................................................... 7

9 Sintered filters ........................................................................................................................................................................................................ 8

10 Joints ................................................................................................................................................................................................................................. 9

10.1 General joints ........................................................................................................................................................................................... 9

10.2 The specification of adhesive...................................................................................................................................................... 9

10.3 General removable parts .............................................................................................................................................................10

10.4 Simplified drawing............................................................................................................................................................................11

11 Composite glassware .....................................................................................................................................................................................11

Bibliography .............................................................................................................................................................................................................................13

© ISO 2020 – All rights reserved iii
---------------------- Page: 9 ----------------------
SIST EN ISO 6414:2020
ISO 6414:2020(E)
Foreword

ISO (the International Organization for Standardization) is a worldwide federation of national standards

bodies (ISO member bodies). The work of preparing International Standards is normally carried out

through ISO technical committees. Each member body interested in a subject for which a technical

committee has been established has the right to be represented on that committee. International

organizations, governmental and non-governmental, in liaison with ISO, also take part in the work.

ISO collaborates closely with the International Electrotechnical Commission (IEC) on all matters of

electrotechnical standardization.

The procedures used to develop this document and those intended for its further maintenance are

described in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the

different types of ISO documents should be noted. This document was drafted in accordance with the

editorial rules of the ISO/IEC Directives, Part 2 (see www .iso .org/ directives).

Attention is drawn to
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.