EN ISO 8826-1:1995
(Main)Technical drawings - Rolling bearings - Part 1: General simplified representation (ISO 8826-1:1989)
Technical drawings - Rolling bearings - Part 1: General simplified representation (ISO 8826-1:1989)
The principle of the drawing method in this part is that only essential features are shown, preferably in outline. The degree of simplification depends on the kind of object represented, the scale of the drawing and the purpose of the documentation. Part 2 deals with the detailed simplified representation.
Technische Zeichnungen - Wälzlager - Teil 1: Allgemeine vereinfachte Darstellung (ISO 8826-1:1989)
Dieser Teil von ISO 8826 legt Regeln für die allgemeine, vereinfachte Darstellung von Wälzlagern fest. Diese Darstellung ist anzuwenden, wenn es nicht nötig ist, die genaue Form und die Einzelheiten der Wälzlager zu zeigen, z.B. in Zusammenbau-Zeichnungen.
Dessins techniques - Roulements - Partie 1: Représentation simplifiée générale (ISO 8826-1:1989)
La présente partie de l'ISO 8826 prescrit la représentation simplifiée générale des roulements. Il convient d'utiliser cette représentation lorsqu'il n'est pas important de montrer la forme exacte et les détails du roulement, par exemple dans des dessins d'assemblage.
Tehnične risbe - Kotalni ležaji - 1. del: Splošno poenostavljeno prikazovanje (ISO 8826-1:1989)
General Information
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-1998
7HKQLþQHULVEH.RWDOQLOHåDMLGHO 6SORãQRSRHQRVWDYOMHQRSULND]RYDQMH ,62
Technical drawings - Rolling bearings - Part 1: General simplified representation (ISO
8826-1:1989)
Technische Zeichnungen - Wälzlager - Teil 1: Allgemeine vereinfachte Darstellung (ISO
8826-1:1989)
Dessins techniques - Roulements - Partie 1: Représentation simplifiée générale (ISO
8826-1:1989)
Ta slovenski standard je istoveten z: EN ISO 8826-1:1995
ICS:
01.100.20 Konstrukcijske risbe Mechanical engineering
drawings
21.100.20 Kotalni ležaji Rolling bearings
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
IS0
INTERNATIONAL
8826-l
STANDARD
First edition
1989-08-01
Technical drawings - Rolling bearings -
Part 1:
General simplified representation
Desks techniques - Roulements -
Partie 1: Rep&en ta tion simpfifide g&n&ale
Reference number
IS0 8826-l : 1989 (E)
IS0 8826-l : 1989 (E)
Foreword
IS0 (the International Organization for Standardization) is a worldwide federation of
national standards bodies (IS0 member bodies). The work of preparing International
Standards is normally carried out through IS0 technical committees. Each member
body interested in a subject for which a technical committee has been established has
the right to be represented on that committee. International organizations, govern-
mental and non-governmental, in liaison with ISO, also take part in the work. IS0
collaborates closely with the International Electrotechnical Commission (IEC) on all
matters of electrotechnical standardization.
Draft International Standards adopted by the technical committees are circulated to
the member bodies for approval before their acceptance as International Standards by
the IS0 Council. They are approved in accordance with IS0 procedures requiring at
least 75 % approval by the member bodies voting.
International Standard IS0 8826-l was prepared by Technical Committee ISO/TC 10,
Technical drawings.
IS0 8826 will consist of the following parts, under the general title Technical drawings
- Rolling bearings:
-
Part I: General simplified representation
-
Part 2: De tailed simplified representation
0 IS0 1989
All rights reserved. No part of this publication may be reproduced or utilized in any form or by any
means, electronic or mechanical, including photocopying and microfilm, without permission in
writing from the publisher.
International Organization for Standardization
Case postale 56 l CH-1211 Geneve 20 l Switzerland
Printed in Switzerland
ii
IS0 8826-l : 1989 (E)
Introduction
IS0 8826 provides rules for the simplified representation of rolling bearings.
The principle of drawing practice is to depict the object to scale using lines. In
simplified representations, only essential features are shown, preferably in outline (in
order to save time and effort).
The degree of simplification depends on the kind of object represented, the scale of the
drawing and the purpose of the
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.