iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CEN

EN 26:1997

(Main)

Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum 1998)

Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum 1998)

The object of this standard is to define the classification and the principal constructional and operational characteristics of gas-fired instantaneous water heater for sanitary uses. It covers safety, rational use of energy and fitness for purpose. It applies to instantaneous water heaters for sanitary uses, with a permanent pilot or automatic ignition, with a nominal useful output not exceeding 45 kW and capable of operating with the gases of the various Wobbe number ranges.

Gasbeheizte Durchlauf-Wasserheizer für den sanitären Gebrauch mit atmosphärischen Brennern (einschließlich Corrigendum 1998)

Diese Norm legt die Einteilung und die wesentlichen Konstruktions- und Funktionsanforderungen von gasbeheizten Durchlauf-Wasserheizern für den sanitären Gebrauch fest. Sie gilt für die Sicherheit, den wirtschaftlichen Energieeinsatz und die Gebrauchsgüte. Sie gilt für Durchlauf-Wasserheizer für den sanitären Gebrauch mit dauernd brennender Zündflamme oder automatischer Zündung und einer Nennwärmeleistung bis 45 kW, die Gase mit den unterschiedlichen Wobbeindebereichen verwenden.

Appareils de production instantanée d'eau chaude pour usages sanitaires équipés de brûleurs atmosphériques utilisant les combustibles gazeux

Cette norme a pour objet de définir la classification et les principales caractéristiques de construction et de fonctionnement des appareils de production instantanée d'eau chaude pour usages sanitaires utilisant les combustibles gazeux. Elle s'applique pour la sécurité, l'utilisation rationnelle de l'énergie et l'aptitude à la fonction.

Pretočni plinski grelniki z atmosferskim gorilnikom za pripravo sanitarne tople vode (vključno s popravkom 1998)

General Information

Status
Withdrawn
Publication Date
21-Jan-1997
Withdrawal Date
12-May-2015
ICS
91.140.65 - Water heating equipment
Technical Committee
CEN/TC 48 - Domestic gas-fired water heaters
Drafting Committee
CEN/TC 48/WG 1 - Revision of EN 26
Current Stage
9960 - Withdrawal effective - Withdrawal
Completion Date
13-May-2015
Directive
2009/142/EC - DIRECTIVE 2009/142/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 30 November 2009 relating to appliances burning gaseous fuels
90/396/EEC - Appliances burning gaseous fuels
Mandate
M/BC/CEN/89/6 - Standardization request to CEN concerning appliances burning gaseous fuels
Ref Project
SIST EN 26:2004 - Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum 1998)

Relations

Replaced By
EN 26:2015 - Gas-fired instantaneous water heaters for the production of domestic hot water
Effective Date
24-Oct-2011
Amended By
EN 26:1997/A1:2000 - Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
Effective Date
08-Jun-2022
Amended By
EN 26:1997/A2:2004 - Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
Effective Date
08-Jun-2022
Amended By
EN 26:1997/A3:2006 - Gas-fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners
Effective Date
08-Jun-2022
Corrected By
EN 26:1997/AC:1998 - Gas-fired instantaneous water heaters for sanitary uses production, fitted with atmospheric burners (Including Corrigendum 1998)
Effective Date
08-Jun-2022

Buy Standard

EN 26:1997EN 26:1997
PreviousNext
Standard + National Annex and/or Foreword
EN 26:1997
Foreword and/or annex in Slovenian language, body of the standard in English language
145 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CEN
EN 26:2023(Main)
Gas-fired instantaneous water heaters for the production of domestic hot water
SIST EN 26:2024

This European Standard defines the specifications and test methods concerning the construction, safety, rational use of energy and fitness for purpose, and also the classification and marking of gas-fired instantaneous water heaters for sanitary uses, hereafter called “water heaters”.
This European Standard applies to water heaters:
-   of types AAS, B11, B11BS, B12, B12BS, B13, B13BS, B14, B22, B23, B32, B33, B44, B52, B53, C11, C12, C13, C21, C22, C23, C32, C33, C42, C43, C52, C53, C62, C63, C72, C73, C82and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   equipped with atmospheric burners assisted by a fan for the supply of combustion air or evacuation of combustion products or fully premix burners;
-   using one or more combustible gases corresponding to the three gas families and at the pressures stated in accordance to EN 437;
-   of nominal heat input not exceeding 70 kW;
-   with an ignition burner or with direct ignition of the main burner.
In this European Standard, the heat inputs are expressed in relation to the net calorific value (Hi).
This European Standard does not contain all the requirements necessary for:
-   boiling water appliances;
-   appliances intended to be connected to a mechanical means of evacuating the combustion products;
-   appliances which fulfil a dual role of space heating and heating water for sanitary use;
-   appliances making use of the heat of condensation of the water contained in the combustion products;
-   water heaters of types B21, B31, B41, B42, B43 and B51.
This European Standard only covers water heaters where the fan, if any, is an integral part of the appliance.
This European Standard:
-   does not apply to appliances not intended to be connected to a flue when they are not fitted with an atmosphere sensing device;
-   takes account of the information given in Technical Report CEN/CR 1472:1994 with respect to marking.
Type B appliances should be with a combustion products discharge safety device to comply with essential requirement 3.4.3 of the Gas Appliances Directive 2009/142/EC. In this European Standard, the appliance is identified as type B11BS.
Appliances intended to be installed outdoors or in a room separate from inhabited rooms and provided with appropriate ventilation are not required to have this combustion products discharge safety device but, in this case, appropriate warnings on the packaging, and in the instructions should clearly define the limited authorized use for this type of appliance. In this European Standard, the appliance is identified as type B11.
The main symbols used in this European Standard are summarized in Annex F.

  • Standard
    168 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 89:2015(Main)
Gas-fired storage water heaters for the production of domestic hot water
SIST EN 89:2015

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage water heaters for domestic hot water uses, hereafter called "appliance".
This European Standard applies to appliances:
-   of types B11, B11BS, C11, C12, C13, C21, C31,, C32, C33, C42, C43, C51,C52, C53, C62, C63, C72, C73, C81 connected to an individual flue duct, C82 and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   using one or more combustible gases corresponding to the three gas families and the pressures indicated in EN 437;
-   of nominal heat input not exceeding 150 kW (net calorific value);
-   fitted with electrically operated mechanical flue dampers that are positioned downstream of the heat exchanger.

  • Standard
    159 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 26:2015/prA1:2016(Amendment)
Gas-fired instantaneous water heaters for the production of domestic hot water
SIST EN 26:2015/oprA1:2016

This European Standard defines the specifications and test methods concerning the construction, safety, rational use of energy and fitness for purpose, and also the classification and marking of gas-fired instantaneous water heaters for sanitary uses, hereafter called “water heaters”.
This European Standard applies to water heaters:
-   of types AAS, B11, B11BS, B12, B12BS, B13, B13BS, B14, B22, B23, B32, B33, B44, B52, B53, C11, C12, C13, C21, C22, C23, C32, C33, C42, C43, C52, C53, C62, C63, C72, C73, C82and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   equipped with atmospheric burners assisted by a fan for the supply of combustion air or evacuation of combustion products or fully premix burners;
-   using one or more combustible gases corresponding to the three gas families and at the pressures stated in accordance to EN 437;
-   of nominal heat input not exceeding 70 kW;
-   with an ignition burner or with direct ignition of the main burner.
In this European Standard, the heat inputs are expressed in relation to the net calorific value (Hi).
This European Standard does not contain all the requirements necessary for:
-   boiling water appliances;
-   appliances intended to be connected to a mechanical means of evacuating the combustion products;
-   appliances which fulfil a dual role of space heating and heating water for sanitary use;
-   appliances making use of the heat of condensation of the water contained in the combustion products;
-   water heaters of types B21, B31, B41, B42, B43 and B51.
This European Standard only covers water heaters where the fan, if any, is an integral part of the appliance.
This European Standard:
-   does not apply to appliances not intended to be connected to a flue when they are not fitted with an atmosphere sensing device;
-   takes account of the information given in Technical Report CEN/CR 1472:1994 with respect to marking.
Type B appliances should be with a combustion products discharge safety device to comply with essential requirement 3.4.3 of the Gas Appliances Directive 2009/142/EC. In this European Standard, the appliance is identified as type B11BS.
Appliances intended to be installed outdoors or in a room separate from inhabited rooms and provided with appropriate ventilation are not required to have this combustion products discharge safety device but, in this case, appropriate warnings on the packaging, and in the instructions should clearly define the limited authorized use for this type of appliance. In this European Standard, the appliance is identified as type B11.
The main symbols used in this European Standard are summarized in Annex F.

  • Draft
    13 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 89:2015/prA1:2016(Amendment)
Gas-fired storage water heaters for the production of domestic hot water
SIST EN 89:2015/oprA1:2016

This European Standard defines the specifications and test methods for the construction, safety, rational use of energy and fitness for purpose, environment and classification and marking of gas-fired storage water heaters for domestic hot water uses, hereafter called "appliance".
This European Standard applies to appliances:
-   of types B11, B11BS, C11, C12, C13, C21, C31,, C32, C33, C42, C43, C51,C52, C53, C62, C63, C72, C73, C81 connected to an individual flue duct, C82 and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   using one or more combustible gases corresponding to the three gas families and the pressures indicated in EN 437;
-   of nominal heat input not exceeding 150 kW (net calorific value);
-   fitted with electrically operated mechanical flue dampers that are positioned downstream of the heat exchanger.

  • Draft
    11 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 26:2023(Main)
Gas-fired instantaneous water heaters for the production of domestic hot water
SIST EN 26:2024

This European Standard defines the specifications and test methods concerning the construction, safety, rational use of energy and fitness for purpose, and also the classification and marking of gas-fired instantaneous water heaters for sanitary uses, hereafter called “water heaters”.
This European Standard applies to water heaters:
-   of types AAS, B11, B11BS, B12, B12BS, B13, B13BS, B14, B22, B23, B32, B33, B44, B52, B53, C11, C12, C13, C21, C22, C23, C32, C33, C42, C43, C52, C53, C62, C63, C72, C73, C82and C83 according to CEN/TR 1749;
-   fitted with atmospheric burners;
-   equipped with atmospheric burners assisted by a fan for the supply of combustion air or evacuation of combustion products or fully premix burners;
-   using one or more combustible gases corresponding to the three gas families and at the pressures stated in accordance to EN 437;
-   of nominal heat input not exceeding 70 kW;
-   with an ignition burner or with direct ignition of the main burner.
In this European Standard, the heat inputs are expressed in relation to the net calorific value (Hi).
This European Standard does not contain all the requirements necessary for:
-   boiling water appliances;
-   appliances intended to be connected to a mechanical means of evacuating the combustion products;
-   appliances which fulfil a dual role of space heating and heating water for sanitary use;
-   appliances making use of the heat of condensation of the water contained in the combustion products;
-   water heaters of types B21, B31, B41, B42, B43 and B51.
This European Standard only covers water heaters where the fan, if any, is an integral part of the appliance.
This European Standard:
-   does not apply to appliances not intended to be connected to a flue when they are not fitted with an atmosphere sensing device;
-   takes account of the information given in Technical Report CEN/CR 1472:1994 with respect to marking.
Type B appliances should be with a combustion products discharge safety device to comply with essential requirement 3.4.3 of the Gas Appliances Directive 2009/142/EC. In this European Standard, the appliance is identified as type B11BS.
Appliances intended to be installed outdoors or in a room separate from inhabited rooms and provided with appropriate ventilation are not required to have this combustion products discharge safety device but, in this case, appropriate warnings on the packaging, and in the instructions should clearly define the limited authorized use for this type of appliance. In this European Standard, the appliance is identified as type B11.
The main symbols used in this European Standard are summarized in Annex F.

  • Standard
    168 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 16510-2-4:2022(Main)
Residential solid fuel burning appliances - Part 2-4: Independent boilers - Nominal heat output up to 50 kW
SIST EN 16510-2-4:2023

This document is applicable to independent boiler appliances for solid fuel with a nominal output up to 50 kW (hand and automatically fired independent boilers (hereafter called appliances)).
The indented use of the appliances is space heating in residential buildings. This happens directly or via provision of hot water for central heating. They are designed for use only with open vented systems at a working pressure not exceeding 2 bar.
The appliances can burn one or more types of the following solid fuels as specified:
-   wood logs;
-   compressed untreated wood;
-   wood pellets;
-   lignite briquettes;
-   solid mineral fuels;
-   peat briquettes.
The appliances are operated closed and/or open.
The appliances are typed according to their tightness depending on their designation in accordance with a possible operation together with a room ventilation system.
This document is not applicable for:
-   appliances for hot water only production and heat output < 5 kW;
-   automatic stoking devices.
This document specifies procedures for assessment and verification of constancy of performance (AVCP) of characteristics of solid fuel burning independent boiler appliances.

  • Standard
    33 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13203-2:2022(Main)
Gas-fired domestic appliances producing hot water - Part 2: Assessment of energy consumption
SIST EN 13203-2:2022

This document is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage tank appliances; waters-heaters and combination boilers that have:
-   a heat input not exceeding 400 kW;
-   a hot water storage tank capacity (if any) not exceeding 2 000 l.
In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
The water heaters covered by the present standard are considered "conventional water heaters" as defined by the Transitional Methods (Commission Communication 2014/C 207/03) then in the calculation formula for the Annual Electricity Consumption (AEC), Qcor is equal to zero.
In case of the boiler is equipped with an internal or external Passive Flue Heat Recovery Device (PFHRD), the boiler efficiency can be assessed by applying EN 13203-2:2022 in combination with EN 13203-7:2022. In case of a PFHRD, where the technology has the ability to recover energy out of flue gasses during central heating production to be able to preheat the domestic hot water (indirect contribution), to assess this indirect contribution EN 13203-7:2022 applies. EN 13203-2:2022 is applicable for measuring and calculating the direct efficiency (direct contribution) while combining the measuring results of EN 13203-7:2022 the overall efficiency (direct and indirect) can be calculated. EN 13203-1:2015 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of the appliances. It specifies a few daily load profiles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. Where other technologies are combined with a gas-fired boiler or a water heater to produce domestic hot water, specific parts of EN 13203 apply.

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13203-5:2022(Main)
Gas-fired domestic appliances producing hot water - Part 5: Assessment of energy consumption of gas-fired appliances combined with electrical heat pump
SIST EN 13203-5:2022

This document is applicable to gas-fired appliances producing domestic hot water. It applies to both instantaneous and storage gas-fired combined with electric heat pump.
It applies to a package marketed as single unit or fully specified by the manufacturer that have:
-   a heat input not exceeding 400 kW;
-   a hot water storage tank capacity (if any) not exceeding 2 000 l.
EN 13203-1:2015 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of gas fired appliances combined with heat pump with electrically driven compressor according to EN 16147. It specifies a number of daily load profiles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. Where other technologies are combined with a gas-fired boiler or a water heater to produce domestic hot water, specific parts of EN 13203 apply.
The present document does not apply for gas boilers with recovery systems using combustion products as heat source for the electrical heat pump.
When the electrical heat pump does not work for domestic hot water production in the summer period, the present standard is not applicable for energy performances assessing, instead EN 13203-2:2022 is applicable.

  • Standard
    37 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13203-6:2022(Main)
Gas-fired domestic appliances producing hot water - Part 6: Assessment of energy consumption of adsorption and absorption heat pumps
SIST EN 13203-6:2022

This document is applicable to gas-fired appliances producing domestic hot water. It applies to sorption heat pumps connected to or including a domestic hot water storage tank. It applies to a package marketed as single unit or fully specified that have:
-   a heat input not exceeding 400 kW;
-   a hot water storage tank capacity (if any) not exceeding 2 000 l.
In the case of gas-fired sorption heat pumps, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
EN 13203-1:2015 sets out in qualitative and quantitative terms the performance in delivery of domestic hot water for a selected variety of uses. It also gives a system for presenting the information to the user. The present document sets out a method for assessing the energy performance of the appliances. It specifies a number of daily load profiles for each domestic hot water use, kitchen, shower, bath and a combination of these, together with corresponding test procedures, enabling the energy performances of different gas-fired appliances to be compared and matched to the needs of the user. Where other technologies are combined with a gas-fired sorption heat to produce domestic hot water, specific parts of EN 13203 apply.
Horizontal ground heat sources are not covered by the scope of the present document.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CEN
EN 13203-7:2022(Main)
Gas-fired domestic appliances producing hot water - Part 7: Assessment of energy consumption of combination boilers equipped with a passive flue heat recovery device
SIST EN 13203-7:2022

This document is applicable to gas-fired appliances producing domestic hot water. It applies to condensing combination boilers with passive flue heat recovery device (PFHRD) that have:
-   a heat input not exceeding 400 kW;
-   a hot water storage tank capacity (if any) not exceeding 2 000 l;
-   a declared load profile between M to 4XL.
In the case of combination boilers, with or without storage tank, domestic hot water production is integrated or coupled, the whole being marketed as a single unit.
For this document, some tests and calculation results of EN 13203-2:2022 are used to calculate the energy consumptions.

  • Standard
    26 pages
    English language
    sale 10% off
    e-Library read for
    1 day