FprEN 13757-3
(Main)Communication systems for meters - Part 3: Application protocols
Communication systems for meters - Part 3: Application protocols
This document specifies application protocols for communication systems for meters and remote reading of meters.
This document specifies application protocols, especially the M-Bus application protocol.
This document is intended to be used with the lower layer specifications determined in the EN 13757-series.
Kommunikationssysteme für Zähler - Teil 3: Anwendungsprotokolle
Dieses Dokument legt Anwendungsprotokolle für Kommunikationssysteme für Zähler fest.
Dieses Dokument legt Anwendungsprotokolle, insbesondere das M-Bus-Anwendungsprotokoll fest.
Dieses Dokument soll mit den in EN 13757-2, EN 13757-4, EN 13757-5, EN 13757-6 und EN 13757-7 festgelegten Spezifikationen der unteren Schicht verwendet werden.
Systèmes de communication pour compteurs - Partie 3 : Protocoles d'application
Le présent document spécifie des protocoles d’application pour les systèmes de communication pour compteurs.
Le présent document spécifie des protocoles d’application, notamment le protocole d’application M-Bus.
Le présent document est destiné à être utilisé avec les spécifications relatives aux couches inférieures déterminées dans l’EN 13757-2, l’EN 13757-4, l’EN 13757-5, l’EN 13757-6 et l’EN 13757-7.
Komunikacijski sistemi za merilnike - 3. del: Aplikacijski protokoli
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2023
Komunikacijski sistemi za merilnike - 3. del: Aplikacijski protokoli
Communication systems for meters - Part 3: Application protocols
Kommunikationssysteme für Zähler - Teil 3: Anwendungsprotokolle
Systèmes de communication pour compteurs - Partie 3 : Protocoles d'application
Ta slovenski standard je istoveten z: prEN 13757-3
ICS:
33.200 Daljinsko krmiljenje, daljinske Telecontrol. Telemetering
meritve (telemetrija)
35.100.70 Uporabniški sloj Application layer
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
DRAFT
EUROPEAN STANDARD
prEN 13757-3
NORME EUROPÉENNE
EUROPÄISCHE NORM
July 2023
ICS Will supersede EN 13757-3:2018
English Version
Communication systems for meters - Part 3: Application
protocols
Systèmes de communication pour compteurs - Partie 3 Kommunikationssysteme für Zähler - Teil 3:
: Protocoles d'application Anwendungsprotokolle
This draft European Standard is submitted to CEN members for enquiry. It has been drawn up by the Technical Committee
CEN/TC 294.
If this draft becomes a European Standard, CEN members are bound to comply with the CEN/CENELEC Internal Regulations
which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
This draft European Standard was established by CEN in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CEN member into its own language and notified to the CEN-CENELEC
Management Centre has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia,
Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway,
Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Türkiye and
United Kingdom.
Recipients of this draft are invited to submit, with their comments, notification of any relevant patent rights of which they are
aware and to provide supporting documentation.
Warning : This document is not a European Standard. It is distributed for review and comments. It is subject to change without
notice and shall not be referred to as a European Standard.
EUROPEAN COMMITTEE FOR STANDARDIZATION
COMITÉ EUROPÉEN DE NORMALISATION
EUROPÄISCHES KOMITEE FÜR NORMUNG
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2023 CEN All rights of exploitation in any form and by any means reserved Ref. No. prEN 13757-3:2023 E
worldwide for CEN national Members.
prEN 13757-3:2023 (E)
Contents Page
European foreword . 4
Introduction . 5
1 Scope . 7
2 Normative references . 7
3 Terms and definitions . 7
4 Abbreviations and symbols . 8
4.1 Abbreviations . 8
4.2 Symbols . 9
5 Selection of an application protocol . 9
6 M-Bus protocol . 10
6.1 General . 10
6.2 M-Bus data record . 10
6.3 Data Information Block (DIB) . 11
6.4 Value Information Block (VIB) . 14
6.5 Sensor specific Information . 33
6.6 Manufacturer specific unstructured data block . 39
7 Application reset and application select . 39
7.1 Application reset . 39
7.2 Application select with subcode . 39
7.3 Overview about CI-Fields for Application reset and Application select . 42
7.4 Rules for application selection . 43
7.5 Rules for block selection. 43
7.6 Selected application block in M-Bus Application protocol . 44
8 Clock synchronization . 44
9 Report of alarm status (slave to master) . 44
10 Report of application error . 44
10.1 General . 44
10.2 Status field . 44
10.3 General application layer errors . 44
11 Switching baud rate for M-Bus link layer according to EN 13757-2 . 46
12 Synchronize action . 46
13 Manufacturer specific protocols . 46
14 Other application protocols . 47
15 Image transfer . 47
Annex A (normative) Coding of data records . 48
Annex B (normative) Interpretation of hex-codes A –F in BCD-data fields . 56
h h
Annex C (normative) VIF coding for special units . 57
Annex D (informative) Alarm protocol. 59
Annex E (informative) Special sequences for M-Bus devices . 60
prEN 13757-3:2023 (E)
Annex F (normative) Transmission of profiles . 66
Annex G (normative) Compact M-Bus frame. 72
Annex H (normative) Translating M-Bus type record descriptors to OBIS-type record
descriptors . 77
Annex I (normative) Image Transfer . 99
Bibliography . 121
prEN 13757-3:2023 (E)
European foreword
This document (prEN 13757-3:2023) has been prepared by Technical Committee CEN/TC 294
“Communication systems for meters”, the secretariat of which is held by DIN.
This document is currently submitted to the CEN Enquiry.
This document will supersede EN 13757-3:2018.
This document has been prepared under a mandate given to CEN by the European Commission and the
European Free Trade Association.
This document falls under Mandate EU M/441 “Standardisation mandate to CEN, CENELEC and ETSI in
the field of measuring instruments for the development of an open architecture for utility meters
involving communication protocols enabling interoperability” by providing the relevant definitions and
methods for meter data transmission on application layer level. The M/441 Mandate is driving significant
development of standards in smart metering.
EN 13757-3:2023 includes the following significant technical changes with respect to EN 13757-3:2018:
— Support of sensor devices and alarm devices in new subclause 6.5 and Table 13;
— add new Table 14 - Bit field definition of “Installation conditions”;
— mark unused VIF/VIFE in Table 10 and Table 12 as deprecated;
— extend coding of message application in Table 26;
— add alternative non-metric units in Annex C;
— revision of the clock synchronisation protocol in Annex E.3.
EN 13757 is currently composed with the following parts:
— Communication systems for meters — Part 1: Data exchange;
— Communication systems for meters — Part 2: Wired M-Bus communication;
— Communication systems for meters — Part 3: Application protocols ;
— Communication systems for meters and remote reading of meters — Part 4: Wireless meter readout
(Radio meter reading for operation in SRD bands);
— Communication systems for meters — Part 5: Wireless M-Bus relaying;
— Communication systems for meters — Part 7: Transport and security services ;
— Communication systems for meters — Part 8: Adaptation Layer;
— CEN/TR 17167, Communication systems for meters — Accompanying TR to EN 13757-2,-3 and −7,
Examples and supplementary information.
prEN 13757-3:2023 (E)
Introduction
This document belongs to the EN 13757 series, which covers communication systems for meters.
EN 13757-1 contains generic descriptions and a communication protocol. EN 13757-2 contains a
physical and a link layer for twisted pair based Meter-Bus (M-Bus). EN 13757-4 describes wireless
communication (often called wireless M-Bus or wM-Bus). EN 13757-5 describes the wireless network
used for repeating, relaying and routing for the different modes of EN 13757-4. EN 13757-6 describes a
twisted pair local bus for short distance (Lo-Bus). EN 13757-2 describes transport mechanism and
security methods for data. The Technical Report CEN/TR 17167 contains informative annexes for
EN 13757-2, EN 13757-3 and EN 13757-7.
These upper M-Bus protocol layers can be used with various Physical Layers and with Data Link Layers
and Network Layers, which support the transmission of variable length binary transparent messages.
Frequently, the Physical and Link Layers of EN 13757-2 (twisted pair) and EN 13757-4 (wireless) as well
as EN 13757-5 (wireless with routing function) or the alternatives described in EN 13757-1 are used.
These upper M-Bus protocol layers have been optimized for minimum battery consumption of meters,
especially for the case of wireless communication, to ensure long battery lifetimes of the meters.
Secondly, it is optimized for minimum message length to minimize the wireless channel occupancy and
hence the collision rate. Thirdly, it is optimized for minimum requirements towards the meter processor
regarding requirements of RAM size, code length and computational power.
An overview of communication systems for meters is given in EN 13757-1, which also contains further
definitions.
This document concentrates on the meter communication. The meter communicates with one (or
occasionally several) fixed or mobile communication partners which again might be part of a private or
public network. These further communication systems might use the same or other application layer
protocols, security, privacy, authentication, and management methods.
To facilitate common communication systems for CEN-meters (e.g. gas, water, thermal energy and heat
cost allocators) and for electricity meters, in this standard occasionally electricity meters are mentioned.
All these references are for information only and are not standard requirements. The definition of
communication standards for electricity meters (possibly by a reference to CEN standards) remains
solely in the responsibility of CENELEC.
1)
NOTE 1 CEN/TR 17167:
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.