EN ISO 56000:2025
(Main)Innovation management - Fundamentals and vocabulary (ISO 56000:2025)
Innovation management - Fundamentals and vocabulary (ISO 56000:2025)
This document defines terms for and establishes the fundamental concepts and principles of innovation management.
This document is applicable to:
a) all types of organizations, regardless of type, sector, maturity-level or size;
b) all types of innovations (e.g. product, service, process, model, method);
c) all forms of innovation (e.g. incremental to radical, disruptive);
d) all types of approaches (e.g. internal and open innovation, user-, market-, design- and technology-driven innovation activities).
Innovationsmanagement- Grundlagen und Begriffe (ISO 56000:2025)
1.1 Dieses Dokument enthält das Vokabular, grundlegende Konzepte und Grundsätze des Innovations-managements und seiner systematischen Verwirklichung. Es gilt für:
a) Organisationen, die ein Innovationsmanagementsystem verwirklichen oder Innovationsmanagement-beurteilungen durchführen;
b) Organisationen, die ihre Fähigkeit zur wirksamen Steuerung von Innovationsaktivitäten verbessern müssen;
c) Nutzer, Kunden und andere relevante interessierte Parteien (z. B. Lieferanten, Partner, Förderorgani-sationen, Investoren, Universitäten und öffentliche Behörden), die das Vertrauen in die Innovations-fähigkeiten einer Organisation suchen;
d) Organisationen und interessierte Parteien, die danach streben, die Kommunikation durch allgemeines Verständnis der im Innovationsmanagement verwendeten Begriffe zu verbessern;
e) Anbieter von Schulung, Beurteilung oder Beratung zu Innovationsmanagement und Innovationsmanage¬mentsystemen;
f) Entwickler von Innovationsmanagement und in Bezug stehenden Normen.
1.2 Dieses Dokument soll anwendbar sein auf:
a) alle Arten von Organisationen, ungeachtet der Art, der Branche, des Reifegrads oder der Größe;
b) alle Arten von Innovationen, z. B. ein Produkt, eine Dienstleistung, ein Prozess, Modell und Verfahren, von inkrementeller bis zu radikaler Innovation reichend;
c) alle Arten von Ansätzen, z. B. interne und offene Innovation, nutzer-, markt-, technologie- oder designgesteuerte Innovationsaktivitäten.
Dieses Dokument legt Begriffe fest, die für sämtliche Innovationsmanagement- und Innovationsmanage-mentsystemnormen gelten, die durch das ISO/TC 279 erarbeitet wurden.
Management de l’innovation - Principes essentiels et vocabulaire (ISO 56000:2025)
Le présent document définit les termes et établit les concepts fondamentaux et les principes du management de l’innovation.
Le présent document s’applique à:
a) tous les types d’organismes, quels que soient leur type, leur secteur, leur niveau de maturité ou leur taille;
b) tous les types d’innovations (par exemple produit, service, processus, modèle et méthode);
c) toutes les formes d’innovation (par exemple d’incrémentale à radicale, de rupture);
d) tous les types d’approches (par exemple innovation interne et ouverte, activités d’innovation induites par les utilisateurs, le marché, la conception et la technologie).
Upravljanje inovacij - Osnove in slovar (ISO 56000:2025)
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
oSIST prEN ISO/DIS 56000:2024
01-april-2024
Upravljanje inovacij - Osnove in slovar (ISO/DIS 56000:2024)
Innovation management - Fundamentals and vocabulary (ISO/DIS 56000:2024)
Innovationsmanagement - Grundlagen und Begriffe (ISO/DIS 56000:2024)
Management de l’innovation - Principes essentiels et vocabulaire (ISO/DIS 56000:2024)
Ta slovenski standard je istoveten z: prEN ISO 56000
ICS:
01.040.03 Storitve. Organizacija Services. Company
podjetja, vodenje in kakovost. organization, management
Uprava. Transport. and quality. Administration.
Sociologija. (Slovarji) Transport. Sociology.
(Vocabularies)
03.100.40 Raziskave in razvoj Research and development
oSIST prEN ISO/DIS 56000:2024 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
oSIST prEN ISO/DIS 56000:2024
oSIST prEN ISO/DIS 56000:2024
DRAFT
International
Standard
ISO/DIS 56000
ISO/TC 279
Innovation management —
Secretariat: AFNOR
Fundamentals and vocabulary
Voting begins on:
Management de l’innovation — Principes essentiels et
2024-02-22
vocabulaire
Voting terminates on:
ICS: 03.100.40; 01.040.03; 03.100.01 2024-05-16
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
BE CONSIDERED IN THE LIGHT OF THEIR
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
NATIONAL REGULATIONS.
RECIPIENTS OF THIS DRAFT ARE INVITED
TO SUBMIT, WITH THEIR COMMENTS,
NOTIFICATION OF ANY RELEVANT PATENT
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Reference number
ISO/DIS 56000:2024(en)
oSIST prEN ISO/DIS 56000:2024
DRAFT
ISO/DIS 56000:2024(en)
International
Standard
ISO/DIS 56000
ISO/TC 279
Innovation management —
Secretariat: AFNOR
Fundamentals and vocabulary
Voting begins on:
Management de l’innovation — Principes essentiels et
vocabulaire
Voting terminates on:
ICS: 03.100.40; 01.040.03; 03.100.01
THIS DOCUMENT IS A DRAFT CIRCULATED
FOR COMMENTS AND APPROVAL. IT
IS THEREFORE SUBJECT TO CHANGE
AND MAY NOT BE REFERRED TO AS AN
INTERNATIONAL STANDARD UNTIL
PUBLISHED AS SUCH.
This document is circulated as received from the committee secretariat.
IN ADDITION TO THEIR EVALUATION AS
BEING ACCEPTABLE FOR INDUSTRIAL,
© ISO 2024
TECHNOLOGICAL, COMMERCIAL AND
USER PURPOSES, DRAFT INTERNATIONAL
All rights reserved. Unless otherwise specified, or required in the context of its implementation, no part of this publication may
STANDARDS MAY ON OCCASION HAVE TO
ISO/CEN PARALLEL PROCESSING
be reproduced or utilized otherwise in any form or by any means, electronic or mechanical, including photocopying, or posting on
BE CONSIDERED IN THE LIGHT OF THEIR
the internet or an intranet, without prior written permission. Permission can be requested from either ISO at the address below
POTENTIAL TO BECOME STANDARDS TO
WHICH REFERENCE MAY BE MADE IN
or ISO’s member body in the country of the requester.
NATIONAL REGULATIONS.
ISO copyright office
RECIPIENTS OF THIS DRAFT ARE INVITED
CP 401 • Ch. de Blandonnet 8
TO SUBMIT, WITH THEIR COMMENTS,
CH-1214 Vernier, Geneva
NOTIFICATION OF ANY RELEVANT PATENT
Phone: +41 22 749 01 11
RIGHTS OF WHICH THEY ARE AWARE AND TO
PROVIDE SUPPORTING DOCUMENTATION.
Email: copyright@iso.org
Website: www.iso.org
Published in Switzerland Reference number
ISO/DIS 56000:2023(en)
ii
oSIST prEN ISO/DIS 56000:2024
ISO/DIS 56000:2023(en)
Contents Page
Foreword .iv
Introduction .v
1 Scope . 1
2 Normative references . 1
3 Terms and definitions . 1
3.1 General terms related to innovation .1
3.2 Terms related to organization .5
3.3 Terms related to objective.7
3.4 Terms related to knowledge .9
3.5 Terms related to intellectual property .9
3.6 Terms related to innovation initiative.10
3.7 Terms related to performance . 12
3.8 Terms related to assessment . 13
3.9 Other relevant concepts . 15
4 Fundamental concepts and innovation management principles .16
4.1 General .16
4.1.1 Rationale for engaging in innovation activities .16
4.1.2 Innovation activities within and across organizations .16
4.1.3 Impact of innovations .17
4.2 Fundamental concepts .17
4.2.1 Innovation .17
4.2.2 Attributes of innovation .18
4.2.3 Concepts related to innovation .19
4.2.4 Activities and processes to achieve innovation .19
4.2.5 Innovation management . 20
4.2.6 Innovation management system .21
4.2.7 Relationship with other management systems . 22
4.3 Innovation management principles . 22
4.3.1 Realization of value . 22
4.3.2 Future-focused leaders . 23
4.3.3 Strategic direction .24
4.3.4 Culture . 25
4.3.5 Exploiting insights . 26
4.3.6 Managing uncertainty .27
4.3.7 Adaptability .27
4.3.8 Systems approach . 28
Annex A (informative) Concept relationships and their graphical representation .30
Annex B (informative) Relations to vocabulary of other organizations .36
Bibliography .38
Alphabetical index of terms .40
iii
oSIST prEN ISO/DIS 56000:2024
ISO/DIS 56000:2023(en)
Foreword
ISO (the International Organization for Standardization) is a worldwide federation of national standards
bodies (ISO member bodies). The work of preparing International Standards is normally carried out through
ISO technical committees. Each member body interested in a subject for which a technical committee
has been established has the right to be represented on that committee. International organizations,
governmental and non-governmental, in liaison with ISO, also take part in the work. ISO collaborates closely
with the International Electrotechnical Commission (IEC) on all matters of electrotechnical standardization.
The procedures used to develop this document and those intended for its further maintenance are described
in the ISO/IEC Directives, Part 1. In particular, the different approval criteria needed for the different types
of ISO documents should be noted. This document was drafted in accordance with the editorial rules of the
ISO/IEC Directives, Part 2 (see www.iso.org/directives).
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
rights. ISO shall not be held responsible for identifying any or all such patent rights. Details of any patent
rights identified during the development of the document will be in the Introduction and/or on the ISO list of
patent declarations received (see www.iso.org/patents).
Any trade name used in this document is information given for the convenience of users and does not
constitute an endorsement.
For an explanation of the voluntary nature of standards, the meaning of ISO specific terms and
expressions related to conformity assessment, as well as information about ISO's adherence to
the World Trade Organization (WTO) principles in the Technical Barriers to Trade (TBT) see
www.iso.org/iso/foreword.html.
This document was prepared by Technical Committee ISO/TC 279, Innovation management.
Any feedback or questions on this document should be directed to the user’s national standards body. A
complete listing of these bodies can be found at www.iso.org/members.html.
iv
oSIST prEN ISO/DIS 56000:2024
ISO/DIS 56000:2023(en)
Introduction
0.1 General
An organization’s ability to innovate is recognized as a key factor for sustained growth, economic viability,
increased well-being and the sustainable development of society.
The innovation capabilities of an organization include the ability to understand and respond to changing
conditions of its context, to pursue new opportunities and to leverage the knowledge and creativity of
people within the organization in collaboration with external interested parties.
This document is intended to help the user by establishing a coherent, consistent and common framework
to:
a) understand the main terms, definitions, concepts and principles of innovation management;
b) support an organization to est
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.