EN IEC 62641:2022
(Main)Conductors for overhead lines - Aluminium and aluminium alloy wires for concentric lay stranded conductors
Conductors for overhead lines - Aluminium and aluminium alloy wires for concentric lay stranded conductors
IEC 62641:2022 specifies the mechanical and electrical properties of round and formed wires for equivalent diameters up to the values according to Table 3 for aluminium and aluminium alloys and according to Table 4 for thermal resistant alloys. This document is applicable to aluminium and aluminium alloy wires for the manufacture of concentric lay overhead electrical stranded conductors with or without gap(s) for power transmission purposes. The various materials and their designations are listed in Table 1. For calculation purposes, the values listed in Table 1 are used. This first edition cancels and replaces the second edition of IEC 60104 published in 1987, the first edition of IEC 60121 published in 1960, the first edition of IEC 60889 published in 1987, and the first edition of IEC 62004 published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous editions of IEC 60104, IEC 60121, IEC 60889 and IEC 62004:
designations of aluminium alloys are modified;
aluminium alloys A4, AL4 and AL5 are added;
wire diameter ranges for indicating mechanical properties are modified and extended;
test methods are merged.
Leiter für Freileitungen - Drähte aus Aluminium und Aluminiumlegierung für Leiter aus konzentrisch verseilten Drähten
Conducteurs pour lignes aériennes - Fils d’aluminium et en alliage d’aluminium pour conducteurs toronnés à couches concentriques
La CEI 62641:2022 spécifie les propriétés mécaniques et électriques des fils ronds et de forme pour des diamètres équivalents jusqu’aux valeurs indiquées dans le Tableau 3 pour l’aluminium et les alliages d’aluminium et dans le Tableau 4 pour les alliages résistants à la chaleur. Le présent document s’applique aux fils d’aluminium et en alliage d’aluminium destinés à la fabrication de conducteurs toronnés à couches concentriques pour lignes électriques aériennes, avec ou sans espace(s) pour le transport d’énergie. Les différents matériaux et leurs désignations sont énumérés dans le Tableau 1. Les valeurs indiquées dans ce Tableau 1 sont utilisées pour les calculsCette première édition annule et remplace la deuxième édition de l’IEC 60104 parue en 1987, la première édition de l’IEC 60121 parue en 1960, la première édition de l’IEC 60889 parue en 1987 et la première édition de l’IEC 62004 parue en 2007. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport aux éditions précédentes de l’IEC 60104, l’IEC 60121, l’IEC 60889 et l’IEC 62004:
les désignations des alliages d’aluminium sont modifiées;
les alliages d’aluminium A4, AL4 et AL5 sont ajoutés;
les plages de diamètre du fil qui indiquent les propriétés mécaniques sont modifiées et étendues;
les méthodes d’essai sont fusionnées.
Vodniki za nadzemne vode - Aluminijaste žice in žice iz aluminijeve zlitine za koncentrične pletene vodnike (IEC 62641:2022)
Ta dokument določa mehanske in električne lastnosti okroglih oziroma oblikovanih žic za enakovredne premere do vrednosti, navedenih v preglednici 3 za aluminij in aluminijeve zlitine ter v preglednici 4 za toplotno odporne zlitine. Ta dokument se uporablja za aluminijaste žice in žice iz aluminijeve zlitine za proizvodnjo koncentričnih nadzemnih električnih pletenih vodnikov, z iskrišči ali brez njih, za namene prenosa moči.
Različni materiali in njihove oznake so navedeni v preglednici 1. Pri izračunih se uporabljajo vrednosti iz preglednice 1.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-januar-2023
Nadomešča:
SIST EN 50183:2000
SIST EN 60889:2002
Vodniki za nadzemne vode - Aluminijaste žice in žice iz aluminijeve zlitine za
koncentrične pletene vodnike (IEC 62641:2022)
Conductors for overhead lines - Aluminium and aluminium alloy wires for concentric lay
stranded conductors (IEC 62641:2022)
Leiter für Freileitungen - Drähte aus Aluminium und Aluminiumlegierung für Leiter aus
konzentrisch verseilten Drähten (IEC 62641:2022)
Conducteurs pour lignes aériennes - Fils d'aluminium et en alliage d'aluminium pour
conducteurs toronnés à couches concentriques (IEC 62641:2022)
Ta slovenski standard je istoveten z: EN IEC 62641:2022
ICS:
29.240.20 Daljnovodi Power transmission and
distribution lines
77.150.10 Aluminijski izdelki Aluminium products
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN IEC 62641
NORME EUROPÉENNE
EUROPÄISCHE NORM May 2022
ICS 29.060.01; 29.240.20 Supersedes EN 62004:2009, EN 50183:2000,
EN 60889:1997
English Version
Conductors for overhead lines - Aluminium and aluminium alloy
wires for concentric lay stranded conductors
(IEC 62641:2022)
Conducteurs pour lignes aériennes - Fils d'aluminium et en Leiter für Freileitungen - Drähte aus Aluminium und
alliage d'aluminium pour conducteurs toronnés à couches Aluminiumlegierung für Leiter aus konzentrisch verseilten
concentriques Drähten
(IEC 62641:2022) (IEC 62641:2022)
This European Standard was approved by CENELEC on 2022-04-08. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2022 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN IEC 62641:2022 E
European foreword
The text of document 7/713/FDIS, future edition 1 of IEC 62641, prepared by IEC/TC 7 "Overhead
electrical conductors" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
as EN IEC 62641:2022.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2023-04-11
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2025-04-11
document have to be withdrawn
This document supersedes EN 62004:2009, EN 50183:2000 and EN 60889:1997 and all of its
amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 62641:2022 was approved by CENELEC as a European
Standard without any modification.
IEC 62641 ®
Edition 1.0 2022-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Conductors for overhead lines – Aluminium and aluminium alloy wires for
concentric lay stranded conductors
Conducteurs pour lignes aériennes – Fils d’aluminium et en alliage d’aluminium
pour conducteurs toronnés à couches concentriques
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 29.060.01; 29.240.20 ISBN 978-2-8322-1080-6
– 2 – IEC 62641:2022 © IEC 2022
CONTENTS
FOREWORD . 3
INTRODUCTION . 5
1 Scope . 6
2 Normative references . 6
3 Terms and definitions . 6
4 Material . 8
5 Joints . 8
6 Tests . 8
6.1 General . 8
6.2 Place of testing . 8
6.3 Sampling rate . 9
6.4 Test methods . 9
6.4.1 Appearance . 9
6.4.2 Wire diameter . 9
6.4.3 Tensile strength . 9
6.4.4 Elongation . 9
6.4.5 Wrapping . 10
6.4.6 Bending . 10
6.4.7 Electrical resistivity . 10
6.4.8 Thermal resistance . 10
6.5 Acceptance and rejection . 11
6.6 Certificate of compliance . 11
7 Length and tolerance on length. 11
Annex A (normative) Methods of securing formed wires . 14
Annex B (informative) Thermal-resistant property . 15
B.1 Thermal-resistant properties . 15
B.2 Explanation of the Arrhenius plot . 15
B.3 Continuous operation temperature . 16
B.4 Duration and heating temperature . 16
Bibliography . 17
Figure A.1 – Methods of securing formed wires . 14
Figure B.1 – Arrhenius plot (residual strength 90 %) . 15
a b
Table 1 – Designation and properties for calculation purposes . 11
Table 2 – Tolerance on wire diameter . 12
Table 3 – Minimum mechanical properties for Ax and ALx wires . 12
Table 4 – Minimum mechanical properties for ATx wires . 13
Table 5 – Temperature and duration of heating . 13
Table 6 – Parameters for bending test of aluminium alloy wires . 13
IEC 62641:2022 © IEC 2022 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
CONDUCTORS FOR OVERHEAD LINES –
ALUMINIUM AND ALUMINIUM ALLOY WIRES
FOR CONCENTRIC LAY STRANDED CONDUCTORS
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international
co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and
in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports,
Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with
may participate in this preparatory work. International, governmental and non-governmental organizations liaising
with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for
Standardization (ISO) in accordance with conditions determined by agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence between
any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent
rights. IEC shall not be held responsible for identifying any or all such patent rights.
IEC 62641 has been prepared by IEC technical committee 7: Overhead electrical conductors.
It is an International Standard.
This first edition cancels and replaces the second edition of IEC 60104 published in 1987, the
first edition of IEC 60121 published in 1960, the first edition of IEC 60889 published in 1987,
and the first edition of IEC 62004 published in 2007. This edition constitutes a technical revision.
This edition includes the following significant technical changes with respect to the previous
editions of IEC 60104, IEC 60121, IEC 60889 and IEC 62004:
a) designations of aluminium alloys are modified;
b) aluminium alloys A4, AL4 and AL5 are added;
c) wire diameter ranges for indicating mechanical properties are modified and extended;
d) test methods are merged.
– 4 – IEC 62641:2022 © IEC 2022
The text of this International Standard is based on the following documents:
Draft Report on voting
7/713/FDIS 7/721/RVD
Full information on the voting for its ap
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.