EN 62271-206:2011
(Main)High-voltage switchgear and controlgear - Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV
High-voltage switchgear and controlgear - Part 206: Voltage presence indicating systems for rated voltages above 1 kV and up to and including 52 kV
IEC 62271-206:2011 is applicable to voltage presence indicating systems (VPIS) incorporated in a.c. switchgear and controlgear covered by IEC 62271-200 or IEC 62271-201. Voltage presence indicating systems are devices used to provide information to operators about the voltage condition of the main circuit of the switchgear in which they are installed. This first edition of IEC 62271-206 cancels and replaces the first edition of IEC 61958. This edition constitutes a minor revision. The main changes with respect of the first edition of IEC 61958 are an actualization of references and the degree of protection which has been changed from IPXXB to IP2X.
Hochspannungs-Schaltgeräte und -Schaltanlagen - Teil 206: Spannungsanzeigesysteme für Bemessungsspannungen über 1 kV bis einschließlich 52 kV
Appareillage à haute tension - Partie 206: Systèmes indicateurs de présence de tension assignées supérieures à 1 kV et inférieures ou égales à 52 kV
La CEI 62271-206:2011 est applicable aux systèmes indicateurs de présence de tension (VPIS) incorporés dans l'appareillage pour courant alternatif conforme à la CEI 62271 200 ou à la CEI 62271-201. Les systèmes indicateurs de présence de tension sont des dispositifs utilisés pour informer l'exploitant sur l'état de tension du circuit principal de l'appareillage dans lequel ils sont installés. Cette première édition de la CEI 62271-206 annule et remplace la première édition de la CEI 61958. Cette édition constitue une révision mineure. Les principaux changements par rapport à l'édition de la CEI 61958 sont l'actualisation des références et le degré de protection qui passe de IPXXB à IPX2.
Sestavi predizdelanih visokonapetostnih stikalnih in krmilnih naprav - 206. del: Sistemi za javljanje prisotnosti napetosti (IEC 62271-206:2011)
Ta del IEC 62271 velja za sisteme za javljanje prisotnosti napetosti (VPIS), vgrajene v izmenične stikalne in krmilne naprave, ki jih zajema IEC 62271-200 ali IEC 62271-201. Sistemi za javljanje prisotnosti napetosti so naprave, ki upravljavcem zagotavljajo informacije o stanju napetosti glavnega vezja stikalnih naprav, v katerih so nameščene. Samo javljanje sistemov VPIS ni dovolj za dokaz, da sistem ni aktiven: če delovni postopki tako zahtevajo, se morajo uporabiti ustrezni detektorji napetosti v skladu z IEC 61243-1, IEC 61243-2 in IEC 61243-5.
Ta standard velja tudi za komparatorje, ki so posebej namenjeni uporabi s sistemi VPIS.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-maj-2011
1DGRPHãþD
SIST EN 61958:2002
Sestavi predizdelanih visokonapetostnih stikalnih in krmilnih naprav - 206. del:
Sistemi za javljanje prisotnosti napetosti (IEC 62271-206:2011)
High-voltage prefabricated switchgear and controlgear assemblies - Part 206: Voltage
presence indicating systems (IEC 62271-206:2011)
Hochspannungs-Schaltanlagen - Teil 206: Spannungsanzeigesysteme (IEC 62271-
206:2011)
Ensembles préfabriqués d'appareillages haute tension - Partie 206: Systèmes
indicateurs de présence de tension (CEI 62271-206:2011)
Ta slovenski standard je istoveten z: EN 62271-206:2011
ICS:
13.260 9DUVWYRSUHGHOHNWULþQLP Protection against electric
XGDURP'HORSRGQDSHWRVWMR shock. Live working
29.130.10 Visokonapetostne stikalne in High voltage switchgear and
krmilne naprave controlgear
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD
EN 62271-206
NORME EUROPÉENNE
March 2011
EUROPÄISCHE NORM
ICS 29.130.10 Supersedes EN 61958:2001
English version
High-voltage switchgear and controlgear -
Part 206: Voltage presence indicating systems for rated voltages above
1 kV and up to and including 52 kV
(IEC 62271-206:2011)
Appareillage à haute tension - Hochspannungs-Schaltgeräte und -
Partie 206: Systèmes indicateurs de Schaltanlagen -
présence de tension assignées Teil 206: Spannungsanzeigesysteme für
supérieures à 1 kV et inférieures ou Bemessungsspannungen über 1 kV bis
égales à 52 kV einschließlich 52 kV
(CEI 62271-206:2011) (IEC 62271-206:2011)
This European Standard was approved by CENELEC on 2011-03-03. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62271-206:2011 E
Foreword
The text of document 17C/491/FDIS, future edition 1 of IEC 62271-206, prepared by SC 17C,
High-voltage switchgear and controlgear assemblies, of IEC TC 17, Switchgear and controlgear, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62271-206 on
2011-03-03.
This European Standard supersedes EN 61958:2001.
The main changes with respect of EN 61958:2001 are an actualization of references and the degree of
protection which has been changed from IPXXB to IP2X.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
(dop) 2011-12-03
national standard or by endorsement
– latest date by which the national standards conflicting
(dow) 2014-03-03
with the EN have to be withdrawn
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 62271-206:2011 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 62271-206:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year
IEC 60060-1 - High-voltage test techniques - EN 60060-1 -
Part 1: General definitions and test
requirements
IEC 60068-2-14 - Environmental testing - EN 60068-2-14 -
Part 2-14: Tests - Test N: Change of
temperature
IEC 60068-2-75 - Environmental testing - EN 60068-2-75 -
Part 2-75: Tests - Test Eh: Hammer tests
IEC 60529 - Degrees of protection provided by enclosures - -
(IP Code)
IEC 61243-1 (mod) - Live working - Voltage detectors - EN 61243-1 -
Part 1: Capacitive type to be used for voltages
exceeding 1 kV a.c.
IEC 61243-2 (mod) - Live working - Voltage detectors - EN 61243-2 -
Part 2: Resistive type to be used for voltages
of 1 kV to 36 kV a.c.
IEC 61243-5 (mod) - Live working - Voltage detectors - EN 61243-5 -
Part 5: Voltage detecting systems (VDS)
IEC 62271-1 2007 High-voltage switchgear and controlgear - EN 62271-1 2008
Part 1: Common specifications
IEC 62271-200 - High-voltage switchgear and controlgear - EN 62271-200 -
Part 200: AC metal-enclosed switchgear and
controlgear for rated voltages above 1 kV and
up to and including 52 kV
IEC 62271-201 - High-voltage switchgear and controlgear - EN 62271-201 -
Part 201: AC insulation-enclosed switchgear + corr. November
and controlgear for rated voltages above 1 kV
and up to and including 52 kV
IEC 62271-206 ®
Edition 1.0 2011-01
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
High-voltage switchgear and controlgear –
Part 206: Voltage presence indicating systems for rated voltages above 1 kV
and up to and including 52 kV
Appareillage à haute tension –
Partie 206: Systèmes indicateurs de présence de tension assignées supérieures
à 1 kV et inférieures ou égales à 52 kV
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
CODE PRIX T
ICS 29.130.10 ISBN 978-2-88912-314-8
– 2 – 62271-206 IEC:2011
CONTENTS
FOREWORD . 5
1 General . 7
1.1 Scope . 7
1.2 Normative references . 7
2 Service conditions. 7
3 Terms and definitions . 8
4 Ratings . 8
4.1 Rated voltage . 9
4.2 Rated insulation level . 9
4.3 Rated frequency . 9
5 Design and construction . 9
5.1 General . 9
5.1.1 Parts of VPIS . 9
5.1.2 Phase comparison . 9
5.1.3 Degree of protection (IP code) . 9
5.1.4 Impact resistance . 9
5.1.5 Testing element . 9
5.2 Threshold values for voltage presence indication . 9
5.3 Indication and perceptibility . 10
5.3.1 General . 10
5.3.2 Frequency of repetition . 10
5.3.3 Response time . 10
5.3.4 Indication until power source is exhausted. 10
5.4 Coupling element and voltage limiting device . 10
5.4.1 Insulation of coupling element . 10
5.4.2 Voltage limiting device . 10
5.4.3 Threshold voltage of voltage limiting device. 11
5.4.4 Earth fault conditions . 11
5.4.5 Maximum current delivered by the connecting point . 11
5.5 Marking . 11
5.6 Phase comparator and connecting point . 11
5.6.1 General . 11
5.6.2 Clear indication of phase comparators . 12
5.6.3 Perceptibility of indication . 12
5.6.4 Indication in case of absence of voltage on one side . 12
5.6.5 Indication in case of absence of voltage on both sides . 12
5.7 Electromagnetic compatibility (EMC) . 12
6 Type tests . 13
6.1 General . 13
6.1.1 Sequence of tests . 13
6.1.2 Test specimens . 13
6.1.3 Conditioning procedure . 13
6.1.4 Test voltages . 13
6.1.5 Test conditions . 13
6.1.6 Values of currents and voltages . 14
6.1.7 Tolerances. 14
62271-206 IEC:2011 – 3 –
6.2 Arrangement, assembly, marking, and instructions for use . 14
6.3 Clear indication of VPIS . 14
6.4 Response time of VPIS . 14
6.5 Dielectric strength of the coupling element of VPIS . 15
6.6 Maximum current delivered by the connecting point . 15
6.7 Voltage limiting device . 15
6.7.1 General . 15
6.7.2 Threshold voltage . 15
6.7.3 Current-carrying capacity . 15
6.8 Clear perceptibility of visual indication . 16
6.8.1 Test voltages . 16
6.8.2 Test set-up . 16
6.8.3 Test procedure . 16
6.8.4 Test assessment . 16
6.8.5 Perceptibility of indication at maximum applied voltage . 16
6.8.6 Perceptibility of indication at
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.