EN 61000-4-30:2003
(Main)Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
Defines the methods for measurement and interpretation of results for power quality parameters in 50/60 Hz a.c. power supply systems. The power quality parameters considered in this standard are power frequency, magnitude of the supply voltage, flicker, supply voltage dips and swells, voltage interruptions, transient voltages, supply voltage unbalance, voltage and current harmonics and interharmonics, mains signalling on the supply voltage and rapid voltage changes. Depending on the purpose of the measurement, all or a subset of the phenomena on this list may be measured. This standard is a performance specification, not a design specification. The uncertainty tests in the ranges of influence quantities in this standard determine the performance requirements. This standard gives measurement methods but does not set thresholds.
Elektromagnetische Verträglichkeit (EMV) - Teil 4-30: Prüf- und Messverfahren - Verfahren zur Messung der Spannungsqualität
Compatibilité électromagnétique (CEM) - Partie 4-30: Techniques d'essai et de mesure - Méthodes de mesure de la qualité de l'alimentation
Définit les méthodes de mesure des paramètres de qualité de l'alimentation des réseaux à courant alternatif 50/60 Hz et la façon d'interpréter les résultats. Les paramètres de qualité de l'alimentation pris en compte dans le présent document sont la fréquence, l'amplitude de la tension d'alimentation, le papillotement ("flicker"), les creux et les surtensions temporaires d'alimentation, les coupures de tension, les tensions transitoires, le déséquilibre de tension d'alimentation, les harmoniques et interharmoniques de tension et de courant, les signaux transmis sur la tension d'alimentation et les variations rapides de tension. En fonction de l'objet de la mesure, les mesures peuvent porter soit sur une partie des phénomènes de cette liste, soit sur l'ensemble. La présente norme définit des méthodes de mesure mais ne constitue pas une spécification de réalisation. Les essais de précision dans le domaine de variation des grandeurs d'influence de la présente norme sont utilisés comme exigence fonctionnelle. La présente norme indique des méthodes de mesure sans fixer de seuils.
Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods (IEC 61000-4-30:2003)
General Information
Relations
Standards Content (Sample)
SIST EN 61000-4-30:2003SLOVENSKIdecember 2003
STANDARDElectromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods (IEC 61000-4-30:2003)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61000-4-30:2003(en)ICS33.100.01
EUROPEAN STANDARD
EN 61000-4-30 NORME EUROPÉENNE EUROPÄISCHE NORM
April 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-30:2003 E
ICS 33.100.99
English version
Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques –
Power quality measurement methods (IEC 61000-4-30:2003)
Compatibilité électromagnétique (CEM) Partie 4-30: Techniques d'essai
et de mesure –
Méthodes de mesure de la qualité
de l'alimentation (CEI 61000-4-30:2003)
Elektromagnetische Verträglichkeit (EMV)Teil 4-30: Prüf- und Messverfahren - Verfahren zur Messung
der Spannungsqualität (IEC 61000-4-30:2003)
This European Standard was approved by CENELEC on 2003-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
EN 61000-4-30:2003 - 2 - Foreword The text of document 77A/398/FDIS, future edition 1 of IEC 61000-4-30, prepared by SC 77A, Low frequency phenomena, of IEC TC 77, Electromagnetic compatibility, was submitted to the
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61000-4-30 on 2003-04-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2004-01-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2006-04-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annex A is informative. Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61000-4-30:2003 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60044-1 NOTE Harmonized as EN 60044-1:1999 (modified).
IEC 60044-2 NOTE Harmonized as EN 60044-2:1999 (modified).
IEC 61000-2-2 NOTE Harmonized as EN 61000-2-2:2002 (not modified).
IEC 61010 NOTE Harmonized in EN 61010 series (partly modified).
IEC 61010-2-032 NOTE Harmonized as EN 61010-2-032:2002 (not modified). __________
- 3 - EN 61000-4-30:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-161 - 1) International Electrotechnical Vocabulary (IEV) Chapter 161: Electromagnetic compatibility
- - IEC 60050-300 - 1) Part 311: General terms relating to measurements –
Part 312: General terms relating to electrical measurements -- µ Part 313: Types of electrical measuring instruments –
Part 314: Specific terms according to the type of instrument
- - IEC 61000-2-4 - 1) Electromagnetic compatibility (EMC) Part
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.