EN 61000-4-30:2003
(Main)Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods
Defines the methods for measurement and interpretation of results for power quality parameters in 50/60 Hz a.c. power supply systems. The power quality parameters considered in this standard are power frequency, magnitude of the supply voltage, flicker, supply voltage dips and swells, voltage interruptions, transient voltages, supply voltage unbalance, voltage and current harmonics and interharmonics, mains signalling on the supply voltage and rapid voltage changes. Depending on the purpose of the measurement, all or a subset of the phenomena on this list may be measured. This standard is a performance specification, not a design specification. The uncertainty tests in the ranges of influence quantities in this standard determine the performance requirements. This standard gives measurement methods but does not set thresholds.
Elektromagnetische Verträglichkeit (EMV) - Teil 4-30: Prüf- und Messverfahren - Verfahren zur Messung der Spannungsqualität
Compatibilité électromagnétique (CEM) - Partie 4-30: Techniques d'essai et de mesure - Méthodes de mesure de la qualité de l'alimentation
Définit les méthodes de mesure des paramètres de qualité de l'alimentation des réseaux à courant alternatif 50/60 Hz et la façon d'interpréter les résultats. Les paramètres de qualité de l'alimentation pris en compte dans le présent document sont la fréquence, l'amplitude de la tension d'alimentation, le papillotement ("flicker"), les creux et les surtensions temporaires d'alimentation, les coupures de tension, les tensions transitoires, le déséquilibre de tension d'alimentation, les harmoniques et interharmoniques de tension et de courant, les signaux transmis sur la tension d'alimentation et les variations rapides de tension. En fonction de l'objet de la mesure, les mesures peuvent porter soit sur une partie des phénomènes de cette liste, soit sur l'ensemble. La présente norme définit des méthodes de mesure mais ne constitue pas une spécification de réalisation. Les essais de précision dans le domaine de variation des grandeurs d'influence de la présente norme sont utilisés comme exigence fonctionnelle. La présente norme indique des méthodes de mesure sans fixer de seuils.
Electromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods (IEC 61000-4-30:2003)
General Information
Relations
Standards Content (Sample)
STANDARDElectromagnetic compatibility (EMC) - Part 4-30: Testing and measurement techniques - Power quality measurement methods (IEC 61000-4-30:2003)©
Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljenoReferenčna številkaSIST EN 61000-4-30:2003(en)ICS33.100.01
EUROPEAN STANDARD
EN 61000-4-30 NORME EUROPÉENNE EUROPÄISCHE NORM
April 2003 CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61000-4-30:2003 E
ICS 33.100.99
English version
Electromagnetic compatibility (EMC) Part 4-30: Testing and measurement techniques –
Power quality measurement methods (IEC 61000-4-30:2003)
Compatibilité électromagnétique (CEM) Partie 4-30: Techniques d'essai
et de mesure –
Méthodes de mesure de la qualité
de l'alimentation (CEI 61000-4-30:2003)
Elektromagnetische Verträglichkeit (EMV)Teil 4-30: Prüf- und Messverfahren - Verfahren zur Messung
der Spannungsqualität (IEC 61000-4-30:2003)
This European Standard was approved by CENELEC on 2003-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom.
IEC-CENELEC parallel vote and was approved by CENELEC as EN 61000-4-30 on 2003-04-01. The following dates were fixed: – latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement
(dop) 2004-01-01 – latest date by which the national standards conflicting
with the EN have to be withdrawn
(dow) 2006-04-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annex ZA is normative and annex A is informative. Annex ZA has been added by CENELEC. __________ Endorsement notice The text of the International Standard IEC 61000-4-30:2003 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60044-1 NOTE Harmonized as EN 60044-1:1999 (modified).
IEC 60044-2 NOTE Harmonized as EN 60044-2:1999 (modified).
IEC 61000-2-2 NOTE Harmonized as EN 61000-2-2:2002 (not modified).
IEC 61010 NOTE Harmonized in EN 61010 series (partly modified).
IEC 61010-2-032 NOTE Harmonized as EN 61010-2-032:2002 (not modified). __________
- 3 - EN 61000-4-30:2003
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications This European Standard incorporates by dated or undated reference, provisions from other publications. These normative references are cited at the appropriate places in the text and the publications are listed hereafter. For dated references, subsequent amendments to or revisions of any of these publications apply to this European Standard only when incorporated in it by amendment or revision. For undated references the latest edition of the publication referred to applies (including amendments). NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-161 - 1) International Electrotechnical Vocabulary (IEV) Chapter 161: Electromagnetic compatibility
- - IEC 60050-300 - 1) Part 311: General terms relating to measurements –
Part 312: General terms relating to electrical measurements -- µ Part 313: Types of electrical measuring instruments –
Part 314: Specific terms according to the type of instrument
- - IEC 61000-2-4 - 1) Electromagnetic compatibility (EMC) Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances
EN 61000-2-4 2002 2) IEC 61000-3-8 - 1) Part 3-8: Limits - Signalling on low-voltage electrical installations - Emission levels, frequency bands and electromagnetic disturbance levels
- - IEC 61000-4-7 2002 Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto
EN 61000-4-7 2002 IEC 61000-4-15 - 1) Part 4-15: Testing and measurement techniques - Flickermeter - Functional and design specifications
EN 61000-4-15 1998 2)
1) Undated reference. 2) Valid edition at date of issue.
EN 61180 Series
NORMEINTERNATIONALECEIIECINTERNATIONALSTANDARD61000-4-30Première éditionFirst edition2003-02Compatibilité électromagnétique (CEM) –Partie 4-30:Techniques d'essai et de mesure –Méthodes de mesure de la qualitéde l'alimentationElectromagnetic compatibility (EMC) –Part 4-30:Testing and measurement techniques –Power quality measurement methodsPour prix, voir catalogue en vigueurFor price, see current catalogue IEC 2003
Droits de reproduction réservés
Copyright - all rights reservedAucune partie de cette publication ne peut être reproduite niutilisée sous quelque forme que ce soit et par aucun procédé,électronique ou mécanique, y compris la photo-copie et lesmicrofilms, sans l'accord écrit de l'éditeur.No part of this publication may be reproduced or utilized in anyform or by any means, electronic or mechanical, includingphotocopying and microfilm, without permission in writing fromthe publisher.International Electrotechnical Commission,
3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, SwitzerlandTelephone: +41 22 919 02 11
Telefax: +41 22 919 03 00
E-mail: inmail@iec.ch
Web: www.iec.chCommission Electrotechnique InternationaleInternational Electrotechnical Commission
XCODE PRIXPRICE CODEPUBLICATION FONDAMENTALE EN CEMBASIC EMC PUBLICATION
61000-4-30 © IEC:2003– 3 –CONTENTSFOREWORD.5INTRODUCTION.71Scope.92Normative references.93Definitions.114General.194.1Classes of measurement performance.194.2Organization of the measurements.194.3Electrical values to be measured.194.4Measurement aggregation over time intervals.214.5Measurement aggregation algorithm.214.6Time-clock uncertainty.234.7Flagging concept.235Power quality parameters.255.1Power frequency.255.2Magnitude of the supply voltage.255.3Flicker.275.4Supply voltage dips and swells.295.5Voltage interruptions.335.6Transient voltages.355.7Supply voltage unbalance.355.8Voltage harmonics.375.9Voltage interharmonics.375.10Mains signalling voltage on the supply voltage.395.11Rapid voltage changes.395.12Measurement of underdeviation and overdeviation parameters.396Range of influence quantities and implementation verification.416.1Range of influence quantities.416.2Implementation verification.43Annex A (informative)
Power quality measurements – Issues and guidelines.47A.1Installation precautions.47A.2Transducers.53A.3Transient voltages and currents.59A.4Rapid voltage changes.65A.5Current.65A.6Guidelines for contractual applications of power quality measurements.71A.7Trouble-shooting applications.79A.8Statistical survey applications.81A.9Voltage dip characteristics.83Bibliography.89
61000-4-30 © IEC:2003 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION ____________
ELECTROMAGNETIC COMPATIBILITY (EMC) –
Part 4-30: Testing and measurement techniques – Power quality measurement methods
FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of standards, technical specifications, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any instrument declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61000-4-30 has been prepared by subcommittee 77A: Low- frequency phenomena, of IEC technical committee 77: Electromagnetic compatibility. This standard forms part 4-30 of IEC 61000. It has the status of a basic EMC publication in accordance with IEC Guide 107. The text of this standard is based on the following documents: FDIS Report on voting 77A/398/FDIS 77A/402/RVD
Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
The committee has decided that the contents of this publication will remain unchanged until 2005. At this date, the publication will be
• reconfirmed; • withdrawn; • replaced by a revised edition, or •
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.