Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires

Specifies requirements for portable general purpose luminaires, other than handlamps, for use with tungsten filament, tubular fluorescent and other discharge lamps on supply voltages not exceeding 250 V.

Leuchten - Teil 2: Besondere Anforderungen - Hauptabschnitt 4: Ortsveränderliche Leuchten für allgemeine Zwecke

Luminaires - Partie 2: Règles particulières - Section 4: Luminaires portatifs à usage général

Détaille les prescriptions applicables aux luminaires portatifs à usage général, autres que les baladeuses, à utiliser avec des lampes à filament de tungstène, des lampes tubulaires fluorescentes, et autres lampes à décharge, pour tensions d'alimentation ne dépassant pas 250 V.

Svetilke - 2. del: Posebne zahteve - 4. del: Prenosne svetilke za splošno uporabo (IEC 60598-2-4:1997)

General Information

Status
Withdrawn
Publication Date
13-Jul-1997
Withdrawal Date
31-Mar-1998
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
30-Mar-2021
Completion Date
30-Mar-2021

Relations

Buy Standard

Standard
EN 60598-2-4:1999
English language
10 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)


SLOVENSKI STANDARD
01-julij-1999
1DGRPHãþD
SIST EN 60598-2-4:1995
Svetilke - 2. del: Posebne zahteve - 4. del: Prenosne svetilke za splošno uporabo
(IEC 60598-2-4:1997)
Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose
luminaires
Leuchten - Teil 2: Besondere Anforderungen - Hauptabschnitt 4: Ortsveränderliche
Leuchten für allgemeine Zwecke
Luminaires - Partie 2: Règles particulières - Section 4: Luminaires portatifs à usage
général
Ta slovenski standard je istoveten z: EN 60598-2-4:1997
ICS:
29.140.40 Svetila Luminaires
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

NORME
CEI
INTERNATIONALE
IEC
60598-2-4
INTERNATIONAL
Deuxième édition
STANDARD
Second edition
1997-04
Luminaires –
Partie 2:
Règles particulières –
Section 4: Luminaires portatifs
à usage général
Luminaires –
Part 2:
Particular requirements –
Section 4: Portable general purpose
luminaires
 IEC 1997 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni utilisée No part of this publication may be reproduced or utilized in
sous quelque forme que ce soit et par aucun procédé, électronique any form or by any means, electronic or mechanical, including
ou mécanique, y compris la photocopie et les microfilms, sans photocopying and microfilm, without permission in writing from
l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: +41 22 919 0300 e-mail: inmail@iec.ch IEC web site http: //www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
PRICE CODE G
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60598-2-4 © IEC:1997 – 3 –
CONTENTS
Page
FOREWORD . 5
Clause
4.1 General. 7
4.1.1 Scope . 7
4.1.2 Normative reference. 7
4.2 General test requirements . 7
4.3 Definitions. 7
4.4 Classification of luminaires. 7
4.5 Marking. 7
4.6 Construction. 9
4.7 Creepage distances and clearances . 9
4.8 Provision for earthing . 9
4.9 Terminals. 9
4.10 External and internal wiring . 11
4.11 Protection against electric shock . 11
4.12 Endurance tests and thermal tests . 11
4.13 Resistance to dust and moisture. 11
4.14 Insulation resistance and electric strength . 13
4.15 Resistance to heat, fire and tracking. 13

60598-2-4 © IEC:1997 – 5 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
___________
LUMINAIRES –
Part 2: Particular requirements –
Section 4: Portable general purpose luminaires
FOREWORD
1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization
comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to
promote international co-operation on all questions concerning standardization in the electrical and electronic
fields. To this end and in addition to other activities, the IEC publishes International Standards. Their
preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt
with may participate in this preparatory work. International, governmental and non-governmental organizations
liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International
Organization for Standardization (ISO) in accordance with conditions determined by agreement between the
two organizations.
2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an
international consensus of opinion on the relevant subjects since each technical committee has representation
from all interested National Committees.
3) The documents produced have the form of recommendations for international use and are published in the
form of standards, technical reports or guides and they are accepted by the National Committees in that
sense.
4) In order to promote international unification, IEC National Committees undertake to apply IEC International
Standards transparently to the maximum extent possible in their national and regional standards. Any
divergence between the IEC Standard and the corresponding national or regional standard shall be clearly
indicated in the latter.
5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any
equipment declared to be in conformity with one of its standards.
6) Attention is drawn to the possibility that some of the elements of this International Standard may be the
subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 60598-2-4 has been prepared by subcommittee 34D: Luminaires, of
IEC technical committee 34: Lamps and related equipment.
This second edition cancels and replaces the first edition published in 1979 and amendment 3,
published in 1990, and constitutes a technical revision.
The text of this standard is based on the first edition, amendment 3 and the following
documents:
F
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.