EN 61158-5:2004
(Main)Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
This part of EN 61158 is one of a series produced to facilitate the interconnection of automation system components. It is related to other standards in the set as defined by the three-layer fieldbus Reference Model, which is based in part on the Basic Reference Model for Open Systems Interconnection. Both Reference Models subdivide the area of standardization for interconnection into a series of layers of specification, each of manageable size. The Application Service is provided by the Application Protocol making use of the services available from the Data Link or other immediately lower layer. This part of the EN 61158 series defines the Application Service characteristics that any immediately higher-level protocols may exploit.
Digitale Datenkommunikation in der Leittechnik - Feldbus für industrielle Leitsysteme - Teil 5: Definition der Dienste der Anwendungsschicht (Application Layer)
Communications numériques pour les systèmes de mesure et de commande - Bus de terrain utilisés dans les systèmes de commande industriels - Partie 5: Définition des services de la couche d'application
Veuillez noter que cette partie est également disponible sur un CD-ROM spécial qui contient les parties EN 61158-2 (y compris 2 amendements), EN 61158-3, EN 61158-4, EN 61158-5 et EN 61158-6 au prix préférentiel de CHF 459,00
Digital data communication for measurement and control - Fieldbus for use in industrial control systems - Part 5: Application layer service definition
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-december-2004
1DGRPHãþD
SIST EN 50170:2001
SIST EN 50170:2001/A1:2003
SIST EN 50170:2001/A2:2001
SIST EN 50254:2001
Digital data communication for measurement and control - Fieldbus for use in
industrial control systems - Part 5: Application layer service definition
Digital data communication for measurement and control - Fieldbus for use in industrial
control systems -- Part 5: Application layer service definition
Digitale Datenkommunikation in der Leittechnik - Feldbus für industrielle Leitsysteme --
Teil 5: Definition der Dienste der Anwendungsschicht (Application Layer)
Communications numériques pour les systèmes de mesure et de commande - Bus de
terrain utilisés dans les systèmes de commande industriels -- Partie 5: Définition des
services de la couche d'application
Ta slovenski standard je istoveten z: EN 61158-5:2004
ICS:
25.040.40 Merjenje in krmiljenje Industrial process
industrijskih postopkov measurement and control
35.100.70 Uporabniški sloj Application layer
35.110 Omreževanje Networking
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61158-5
NORME EUROPÉENNE
EUROPÄISCHE NORM July 2004
ICS 25.040; 35.100.70; 35.240.50 Partially supersedes EN 50170:1996 + A1:2002 + A2:1999 + A3:2002 and EN 50254:1998
English version
Digital data communication for measurement and control -
Fieldbus for use in industrial control systems
Part 5: Application layer service definition
(IEC 61158-5:2003 + corrigendum 2004)
Communications numériques pour les Digitale Datenkommunikation
systèmes de mesure et de commande - in der Leittechnik -
Bus de terrain utilisés dans les systèmes Feldbus für industrielle Leitsysteme
de commande industriels Teil 5: Definition der Dienste der
Partie 5: Définition des services Anwendungsschicht (Application Layer)
de la couche d'application (IEC 61158-5:2003 + Corrigendum 2004)
(CEI 61158-5:2003 + corrigendum 2004)
This European Standard was approved by CENELEC on 2004-03-16. CENELEC members are bound to
comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European
Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in one official version (English). A version in any other language made by
translation under the responsibility of a CENELEC member into its own language and notified to the Central
Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech
Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden,
Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2004 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61158-5:2004 E
Foreword
The text of the International Standard IEC 61158-5:2003, prepared by SC 65C, Digital
communications, of IEC TC 65, Industrial-process measurement and control, was submitted to the
Unique Acceptance Procedure and was approved by CENELEC as EN 61158-5 on 2004-03-16 with
inclusion of the accepted future IEC corrigendum.
This European Standard, together with EN 61158-2:2004 to EN 61158-4:2004, EN 61158-6:2004 and
EN 61784-1:2004, supersedes EN 50170:1996 + A1:2002 (+ corr. Aug. 2002) + A2:1999 + A3:2002
(+ corr. Aug. 2002) and EN 50254:1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2005-04-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2007-04-01
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61158-5:2003 and its corrigendum July 2004 was approved
by CENELEC as a European Standard without any modification.
__________
- 3 - EN 61158-5:2004
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.
NOTE Where an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
1)
IEC 61131-1 1992 Programmable controllers EN 61131-1 1994
Part 1: General information
2)
IEC 61131-3 1993 Part 3: Programming languages EN 61131-3 1993
IEC 61158-3 2003 Digital data communication for EN 61158-3 2004
measurement and control - Fieldbus
for use in industrial control systems
Part 3: Data Link Layer service
definition
IEC 61158-4 2003 Part 4: Data Link Layer protocol EN 61158-4 2004
+ corr. July 2004 specification
IEC 61158-6 2003 Part 6: Application Layer protocol EN 61158-6 2004
+ corr. July 2004 specification
ISO/IEC 646 1991 Information technology - ISO 7-bit - -
coded character set for information
interchange
ISO/IEC 7498-1 1994 Information technology - Open EN ISO/IEC 7498-1 1995
systems interconnection - Basic
reference model
Part 1: The basic model
ISO/IEC 7498-3 1997 Part 3: Naming and addressing - -
ISO/IEC 8822 1994 Information technology - Open - -
Systems Interconnection -
Presentation service definition
- -
ISO/IEC 8824 1990 Information technology - Open
Systems Interconnection -
Specification of Abstract Syntax
Notation One (ASN.1)
1)
EN 61131-1:1994 is superseded by EN 61131-1:2003, which is based on IEC 61131-1:2003.
2)
EN 61131-3:1993 is superseded by EN 61131-3:2003, which is based on IEC 61131-1:2003.
Publication Year Title EN/HD Year
ISO/IEC 8859-1 1998 Information technology - 8-bit single-- -
byte coded graphic character sets
Part 1: Latin alphabet No.1
ISO/IEC 9545 1994 Information technology - Open - -
Systems Interconnection -
Application Layer structure
ISO/IEC 10646-1 1993 Information technology - Universal - -
Multiple-Octet Coded Character set
(UCS) - Part 1: Architecture and
Basic Multilingual Plane
ISO/IEC 10731 1994 Information technology - Open - -
Systems Interconnection
Basic reference model - Conventions
for the definition of OSI services
IEEE 754 1985 Standard for Binary Floating-Point - -
(R1990) Arithmetic
INTERNATIONAL IEC
STANDARD
61158-5
Third edition
2003-05
Digital data communications
for measurement and control –
Fieldbus for use in industrial
control systems –
Part 5:
Application layer service definition
IEC 2003 Copyright - all rights reserved
No part of this publication may be reproduced or utilized in any form or by any means, electronic or
mechanical, including photocopying and microfilm, without permission in writing from the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
PRICE CODE
Commission Electrotechnique Internationale
XW
International Electrotechnical Commission
Международная Электротехническая Комиссия
For price, see current catalogue
– 2 – 61158-5 IEC:2003(E)
CONTENTS
FOREWORD.24
0 Introduction.26
0.1 General .26
0.2 Nomenclature for references within this standard .26
1 Scope .27
2 Normative references.27
3 Terms and definitions.28
3.1 ISO/IEC 7498-1 terms .28
3.2 ISO/IEC 8822 terms .29
3.3 ISO/IEC 9545 terms .29
3.4 ISO/IEC 8824 terms .29
3.5 Fieldbus Data Link Layer terms .29
3.6 Fieldbus Application Layer specific definitions .30
3.7 Abbreviations and symbols .41
3.8 Conventions .42
4 Concepts .45
4.1 Overview .45
4.2 Architectural relationships .46
4.3 Fieldbus Application Layer structure.48
4.4 Fieldbus Application Layer naming and addressing .60
4.5 Architecture summary.60
4.6 FAL service procedures.61
4.7 Common FAL attributes .62
4.8 Common FAL service parameters.62
4.9 APDU size.63
5 Data type ASE .63
5.1 General .63
5.2 Formal definition of data type objects .66
5.3 FAL defined data types.67
5.4 Data type ASE service specification .102
6 Type 1 communication model specification.102
6.1 Concepts.102
6.2 ASEs .102
6.3 ARs .246
6.4 Summary of FAL classes .270
6.5 Permitted FAL services by AREP role.271
7 Type 2 communication model specification.273
7.1 Concepts.273
7.2 ASEs .281
7.3 AR.346
7.4 Summary of FAL classes .382
7.5 Permitted FAL services by AR type .383
8 Type 3 communication model specification.383
61158-5 IEC:2003(E) – 3 –
8.1 DP concepts.383
8.2 ASEs .401
8.3 Summary of AL classes .734
8.4 Permitted AL services by AREP role.735
8.5 Conformance classes .739
8.6 Application characteristics .739
9 Type 4 communication model specification.740
9.1 Concepts.
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.