iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

EN 61535:2009/A1:2013

(Amendment)

Installation couplers intended for permanent connection in fixed installations

Installation couplers intended for permanent connection in fixed installations

2012-05-24: Publication editing allocated to cpalagi@cencenelec.eu

Installationssteckverbinder für dauernde Verbindung in festen Installationen

Coupleurs d'installation pour connexions permanentes dans les installations fixes

Inštalacijske spojke za trajni spoj v fiksnih napeljavah (inštalacijah) (IEC 61535:2009/A1:2012)

Ta standard se uporablja za dvo- do petžične inštalacijske spojke skupaj z ozemljitvijo, če je priložena, z nazivno napetostjo do vključno 500 V izmenične napetosti in nazivno spojno zmogljivostjo do vključno 10 mm za trajne spoje v notranjih električnih inštalacijah. Inštalacijske spojke z dodatnimi stiki za napetosti, razen omrežnih napetosti, ne spadajo na področje uporabe tega standarda.

General Information

Status
Withdrawn
Publication Date
21-Feb-2013
Withdrawal Date
19-Jun-2015
ICS
29.120.99 - Other electrical accessories
Technical Committee
CLC/SR 23 - Electrical accessories
Drafting Committee
IEC/TC 23 - IEC_TC_23
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
20-Nov-2022
Completion Date
20-Nov-2022
Directive
2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
Ref Project
SIST EN 61535:2009/A1:2013 - Installation couplers intended for permanent connection in fixed installations (IEC 61535:2009/A1:2012)

Relations

Replaced By
EN IEC 61535:2019 - Installation couplers intended for permanent connection in fixed installations
Effective Date
24-Dec-2019
Amends
EN 61535:2009 - Installation couplers intended for permanent connection in fixed installations
Effective Date
28-Jan-2023

Buy Standard

EN 61535:2009/A1:2013EN 61535:2009/A1:2013
PreviousNext
Amendment
EN 61535:2009/A1:2013
English language
5 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61535:2009/A1:2013
01-april-2013
Inštalacijske spojke za trajni spoj v fiksnih napeljavah (inštalacijah) (IEC
61535:2009/A1:2012)
Installation couplers intended for permanent connection in fixed installations (IEC
61535:2009/A1:2012)
Installationssteckverbinder für dauernde Verbindung in festen Installationen (IEC
61535:2009/A1:2012)
Coupleurs d'installation pour connexions permanentes dans les installations fixes (CEI
61535:2009/A1:2012)
Ta slovenski standard je istoveten z: EN 61535:2009/A1:2013
ICS:
29.120.30 9WLþLYWLþQLFHVSRMNH Plugs, socket-outlets,
couplers
SIST EN 61535:2009/A1:2013 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61535:2009/A1:2013

---------------------- Page: 2 ----------------------

SIST EN 61535:2009/A1:2013

EUROPEAN STANDARD
EN 61535/A1

NORME EUROPÉENNE
February 2013
EUROPÄISCHE NORM

ICS 29.120.99


English version


Installation couplers intended
for permanent connection in fixed installations
(IEC 61535:2009/A1:2012)


Coupleurs d'installation pour connexions Installationssteckverbinder für dauernde
permanentes dans les installations fixes Verbindung in festen Installationen
(CEI 61535:2009/A1:2012) (IEC 61535:2009/A1:2012)





This amendment A1 modifies the European Standard EN 61535:2009; it was approved by CENELEC on 2012-
06-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
the conditions for giving this amendment the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the CEN-CENELEC Management Centre or to any CENELEC member.

This amendment exists in three official versions (English, French, German). A version in any other language
made by translation under the responsibility of a CENELEC member into its own language and notified to the
CEN-CENELEC Management Centre has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany,
Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels


© 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61535:2009/A1:2013 E

---------------------- Page: 3 ----------------------

SIST EN 61535:2009/A1:2013
EN 61535:2009/A1:2013 - 2 -

Foreword
The text of document 23/577/FDIS, future edition 1 of IEC 61535:2009/A1, prepared by IEC/TC 23
"Electrical accessories" was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as
EN 61535:2009/A1:2013.

The following dates are fixed:
(dop) 2013-08-22
• latest date by which the document has
to be implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2015-06-20

standards conflicting with the
document have to be withdrawn

Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such patent
rights.

Endorsement notice
The text of the International Standard IEC 61535:2009/A1:2012 was approved by CENELEC as a
European Standard without any modification.

---------------------- Page: 4 ----------------------

SIST EN 61535:2009/A1:2013



IEC 61535

®


Edition 1.0 2012-05




INTERNATIONAL



STANDARD




NORME



INTERNATIONALE




AMENDMENT 1

AMENDEMENT 1





Installation couplers intended for permanent connection in fixed installations



Coupleurs d’installation pour connexions permanentes dans les installations


fixes

















INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

PRICE CODE
INTERNATIONALE

CODE PRIX C


ICS 29.120.99 ISBN 978-2-83220-080-3



Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internation
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
EN 62080:2009(Main)
Sound signalling devices for household and similar purposes
SIST EN 62080:2010

This International Standard applies to sound signalling devices with integral enclosures or to sound signalling devices intended to be fitted into or supplied with enclosures according to IEC 60670 intended for household and similar purposes with rated voltages greater than 50 V a.c. or 75 V d.c. and not exceeding 250 V a.c. or 250 V d.c., and with rated power inputs not exceeding 100 VA. This standard applies to fixed, portable and plug-in devices for indoor or outdoor use.

  • Standard
    81 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
FprEN IEC 61535:2023(Main)
Installation couplers intended for permanent connection in fixed installations
kSIST FprEN IEC 61535:2023

IEC 61535:2023 is available as IEC 61535:2023 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61535:2023 applies to two-wire, up to five-wire installation couplers, with or without earthing contact, if provided, with a rated voltage up to and including 500 V AC or 500 V DC and a rated connecting capacity up to and including 10 mm2 and a rated current not exceeding 32 A for permanent connection in electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this document. This third edition cancels and replaces the second edition published in 2019. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) inclusion of a definition for "live part" based on IEC 61140; b) additional optional cross medial documentation, e.g. marking with QR-Code; c) corrections on the consistent use of the expressions "earth", "earthing contact", "earthing circuit" and "protective earth(ing)" throughout the document; d) addition of missing compliance provisions to 13.3; e) update of Figure D.1 of Annex D; f) inclusion of new Annex F for cold climate requirements.

  • Draft
    54 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63044-4:2021/AC:2023-07(Corrigendum)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
SIST EN IEC 63044-4:2021/AC:2023
  • Corrigendum
    1 page
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61316:2021(Main)
Industrial cable reels
SIST EN IEC 61316:2021

IEC 61316:2021 is available as IEC 61316:2021 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.IEC 61316:2021 applies to cable reels provided with a non-detachable flexible cable with a rated operating voltage not exceeding 690 V DC and/or 690 V AC with a frequency not exceeding 500 Hz and a rated current not exceeding 63 A, primarily intended for industrial use, either indoors or outdoors, for use with accessories complying with IEC 60309-1, IEC 60309-2 or IEC 60309-4. This third edition cancels and replaces the second edition, published in 1999. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: - Implementation of the latest tests and requirements previously included in IEC 60309-1.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63044-6:2021(Main)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 6: Requirements for planning and installation
SIST EN IEC 63044-6:2021

IEC 63044-6:2021 specifies the requirements for planning and installation of HBES/BACS and the supporting infrastructure. Radio frequency (RF) HBES/BACS are also considered. Safety requirements are covered by IEC 60364 (all parts). Information and communication technology (ICT) and broadcasting and communication technology (BCT) network installations are typically interfaced with HBES/BACS. The requirements for ICT and BCT network installations are covered by ISO/IEC 14763-2. This document does not cover HBES/BACS implementation with: - optical fibre, - power lines, - power over Ethernet (PoE).

  • Standard
    43 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63044-4:2021(Main)
Home and building electronic systems (HBES) and building automation and control systems (BACS) - Part 4: General functional safety requirements for products intended to be integrated in HBES and BACS
SIST EN IEC 63044-4:2021

IEC 63044-4:2021 provides the functional safety requirements for HBES/BACS. In addition, it defines functional safety requirements for the interface of equipment intended to be connected to an HBES/BACS network. It does not apply to interfaces to other networks. This document does not provide functional safety requirements for safety-related systems. This document does not provide requirements on data protection and security.

  • Standard
    32 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN 63044-1:2017/A1:2021(Amendment)
Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1: General requirements
SIST EN 63044-1:2017/A1:2021
  • Amendment
    8 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-4-1:2019/AC:2021-04(Corrigendum)
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
SIST EN IEC 60947-4-1:2019/AC:2021

2021-04-30 - IEC Corrected version

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63210:2021(Main)
Shunt power capacitors of the self-healing type for AC systems having a rated voltage above 1 000 V
SIST EN IEC 63210:2021

his document is applicable to both self-healing capacitor units and self-healing capacitor banks intended to be used, particularly, for power-factor correction of AC power systems having a rated voltage above 1 000 V and fundamental frequencies of 15 Hz to 60 Hz. The following capacitors are excluded from this document: - shunt power capacitors of the self-healing type for AC systems having a rated voltage up to and including 1 000 V (IEC 60831-1, -2); - shunt power capacitors of the non-self-healing type for AC systems having a rated voltage up to and including 1 000 V (IEC 60931-1, -2 and -3); - shunt capacitors of the non-self-healing type for AC power systems having a rated voltage above 1 000 V (IEC 60871-1, -2, -3 and -4); - capacitors for inductive heat-generating plants operating at frequencies between 40 Hz and 24 000 Hz (IEC 60110-1 and -2); - series capacitors (IEC 60143-1, -2, -3 and -4); - AC motor capacitors (IEC 60252-1 and -2); - coupling capacitors and capacitor dividers (IEC 60358-1, -2, -3, -4); - capacitors for power electronic circuits (IEC 61071); - small AC capacitors to be used for fluorescent and discharge lamps (IEC 61048 and IEC 61049); - capacitors for suppression of radio interference; - capacitors intended to be used in various types of electrical equipment, and thus considered as components; - capacitors intended for use with DC voltage superimposed on the AC voltage. Requirements for accessories such as insulators, switches, instrument transformers and external fuses are given in the relevant IEC standards and are not covered by the scope of this document. The object of this document is to: a) formulate uniform rules regarding performances, testing and rating; b) formulate specific safety rules; c) provide a guide for installation and operation.

  • Standard
    59 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 60947-4-1:2019/AC:2020-05(Corrigendum)
Low-voltage switchgear and controlgear - Part 4-1: Contactors and motor-starters - Electromechanical contactors and motor-starters
SIST EN IEC 60947-4-1:2019/AC:2020

2020-11-24: EC formal rejection for citation under EMCD
2020-10-02 because of formal EC rejection for citation under LVD, also the AC is unchecked from LVD
TAN - // IEC Corrigendum

  • Corrigendum
    3 pages
    English and French language
    sale 10% off
    e-Library read for
    1 day