EN 61535:2009

Installation couplers intended for permanent connection in fixed installations

IEC 61535:2009 applies to two up to five wire installation couplers including earth, if provided, with a rated voltage up to and including 500 V a.c. and a rated connecting capacity up to and including 10 mm² for permanent connection in indoor electrical installations. Installation couplers with additional contacts for voltages other than mains voltages are outside the scope of this standard.

Installationssteckverbinder für dauernde Verbindung in festen Installationen

Coupleurs d'installation pour connexions permanentes dans les installations fixes

La CEI 61535:2009 s'applique aux coupleurs d'installation comportant de deux à cinq conducteurs y compris le conducteur de terre (le cas échéant), de tension assignée jusqu'à 500 V inclus en courant alternatif et de capacité de connexion assignée jusqu'à 10 mm² inclus, pour connexion permanente dans installations électriques intérieures. Les coupleurs d'installation avec des contacts supplémentaires pour des tensions autres que la tension d'alimentation du réseau ne sont pas couverts par la présente norme.

Inštalacijske spojke za trajni spoj v fiksnih napeljavah (inštalacijah) (IEC 61535:2009)

Ta standard se uporablja za dvo- do petžične inštalacijske spojke skupaj z ozemljitvijo, če je priložena, z nazivno napetostjo do vključno 500 V izmenične napetosti in nazivno spojno zmogljivostjo do vključno 10 mm za trajne spoje v notranjih električnih inštalacijah. Inštalacijske spojke z dodatnimi stiki za napetosti, razen omrežnih napetosti, ne spadajo na področje uporabe tega standarda.

General Information

• Status: Withdrawn
• Publication Date: 02-Jul-2009
• Withdrawal Date: 30-Apr-2012
• ICS: 29.120.99 - Other electrical accessories
• Technical Committee: CLC/SR 23 - Electrical accessories
• Drafting Committee: IEC/TC 23 - IEC_TC_23
• Parallel Committee: IEC/TC 23 - IEC_TC_23
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Nov-2022
• Completion Date: 20-Nov-2022
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 61535:2009 - Installation couplers intended for permanent connection in fixed installations (IEC 61535:2009)

Relations

• Replaced By: EN IEC 61535:2019 - Installation couplers intended for permanent connection in fixed installations
• Effective Date: 07-Jun-2022
• Amended By: EN 61535:2009/A1:2013 - Installation couplers intended for permanent connection in fixed installations
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN 61535:2009
01-september-2009
Inštalacijske spojke za trajni spoj v fiksnih napeljavah (inštalacijah) (IEC
61535:2009)
Installation couplers intended for permanent connection in fixed installations (IEC
61535:2009)
Installationssteckverbinder für dauernde Verbindung in festen Installationen (CEI
61535:2009)
Coupleurs d'installation pour connexions permanentes dans les installations fixes (IEC
61535:2009)
Ta slovenski standard je istoveten z: EN 61535:2009
ICS:
29.120.30 9WLþLYWLþQLFHVSRMNH Plugs, socket-outlets,
couplers
SIST EN 61535:2009 en,fr
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------

SIST EN 61535:2009

---------------------- Page: 2 ----------------------

SIST EN 61535:2009

EUROPEAN STANDARD
EN 61535

NORME EUROPÉENNE
July 2009
EUROPÄISCHE NORM

ICS 29.120.99


English version


Installation couplers
intended for permanent connection
in fixed installations
(IEC 61535:2009)


Coupleurs d'installation  Installationssteckverbinder
pour connexions permanentes für dauernde Verbindung
dans les installations fixes in festen Installationen
(CEI 61535:2009) (IEC 61535:2009)




This European Standard was approved by CENELEC on 2009-05-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the
Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain,
Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: Avenue Marnix 17, B - 1000 Brussels


© 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 61535:2009 E

---------------------- Page: 3 ----------------------

SIST EN 61535:2009
EN 61535:2009 - 2 -
Foreword
The text of document 23/466/FDIS, future edition 1 of IEC 61535, prepared by IEC TC 23, Electrical
accessories, was submitted to the IEC-CENELEC parallel vote.
A draft amendment, prepared by the CENELEC Reporting Secretariat SR 23, including a normative
CENELEC annex to the future standard, was submitted to the formal vote.
The combined texts were approved by CENELEC as EN 61535 on 2009-05-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2010-05-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2012-05-01
In this standard, the following print types are used:
– requirements proper: in roman type.
– test specifications: in italic type.
– explanatory matter: in smaller roman type.
For this European Standard, any text concerning particular conditions in certain European countries – which
are included in the main body of the International Standard – shall be disregarded and has been replaced by
the normative Annex ZA, Special national conditions.
Annexes ZA and ZB have been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 61535:2009 was approved by CENELEC as a European Standard
without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60309 NOTE  Harmonized in EN 60309 series (partially modified).
IEC 60320 NOTE  Harmonized in EN 60320 series (not modified).
IEC 60364-4-41 NOTE  Harmonized as HD 60364-4-41:2007 (modified).
IEC 61995 NOTE  Harmonized in EN 61995 series (partially modified).
__________

---------------------- Page: 4 ----------------------

SIST EN 61535:2009
- 3 - EN 61535:2009
Add the following annexes:

Annex ZA
(normative)

Special national conditions
Special national condition: National characteristic or practice that cannot be changed even over a long
period, e.g. climatic conditions, electrical earthing condit
...