EN 60519-1:2011

Safety in electroheating installations - Part 1: General requirements

IEC 60519-1:2010 specifies the general safety requirements applicable to industrial electroheating installations. This fourth edition cancels and replaces the third edition published in 2003. It constitutes a technical revision. The main technical changes with respect to the previous edition are as follows: - scope and object have been modified, voltage limits and classification removed; - terms/definitions, normative references and bibliography have been updated and completed; - Clause 4 on classification of equipment according to process frequency has been modified; - Clause 5 (General requirements) has been redrafted and new provisions have been added (e.g. relating to single fault conditions and EMF issues), following the recommendations of IEC Guide 104; - Clause 8 has been redrafted, the contents of subclauses 8.2 and 8.3 has been moved to a new normative Annex A and 8.4 has been deleted; - a new Clause 12 (Protection against other hazards) has been added; - clauses dealing with marking and documentation have been amended. The French version of this standard has not been voted upon.

Sicherheit in Elektrowärmeanlagen - Teil 1: Allgemeine Anforderungen

Sécurité dans les installations électrothermiques - Partie 1: Exigences générales

La CEI 60519-1:2010 spécifie les exigences générales de sécurité applicables aux installations électrothermiques industrielles. Cette quatrième édition annule et remplace la troisième édition parue en 2003. Elle constitue une révision technique. Dans cette quatrième édition de la CEI 60519-1, les modifications techniques significatives par rapport à l'édition antérieure sont les suivantes: - le domaine d'application et l'objet ont été modifiés; - les limites de tension et la classification ont été supprimées; - les termes/définitions, les références normatives et la bibliographie ont été mis à jour et complétés; - l'Article 4 relatif à la classification de l'équipement conformément à la fréquence du processus a été modifié; - l'Article 5 (Exigences générales) a été remanié et de nouvelles dispositions ont été ajoutées (par exemple, concernant les conditions de premier défaut et les questions de champs électromagnétiques), suivant les recommandations du Guide 104 de la CEI; - L'Article 8 a été révisé, le contenu des paragraphes 8.2 et 8.3 a été déplacé dans la nouvelle Annexe normative A et 8.4 a été supprimé; - l'Article 12 (Protection contre d'autres dangers) a été ajouté; - les articles relatifs au marquage et à la documentation ont été amendés. La version française de cette norme n'a pas été soumise au vote.

Varnost pri električnih grelnih inštalacijah - 1. del: Splošne zahteve (IEC 60519-1:2010)

Ta del IEC 60519 določa splošne varnostne zahteve, ki veljajo za industrijske električne grelne inštalacije. Če se te zahteve razlikujejo od tistih v drugih publikacijah IEC, je zagotovljena enaka stopnja varnosti. Zahteve veljajo za industrijske inštalacije, namenjene električnemu gretju in obdelovalni tehnologiji, temeljijo na električnem gretju z mogočo uporabo: – opreme za neposredno in posredno uporovno gretje, – opreme za električne uporovne grelne trakove, – opremo za indukcijsko gretje, – opremo, ki uporablja učinke sil EM na tekoče kovine, – opremo za obločno gretje, vključno s potopljenim obločnim gretjem, – opremo za ponovno taljenje žlindre, – opremo za gretje z plazmo, – opreme za mikrovalovno gretje, – opreme za dielektrično gretje, – opreme za gretje z elektronskim žarkom, – opreme za lasersko gretje, – opreme za gretje z infrardečim sevanjem.

General Information

• Status: Withdrawn
• Publication Date: 27-Jan-2011
• Withdrawal Date: 02-Jan-2014
• ICS: 25.180.10 - Electric furnaces
• Technical Committee: CLC/SR 27 - Industrial electroheating equipment
• Drafting Committee: IEC/TC 27 - IEC_TC_27
• Parallel Committee: IEC/TC 27 - IEC_TC_27
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 14-Apr-2018
• Completion Date: 14-Apr-2018
• Directive: 2006/42/EC - Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast)
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Ref Project: SIST EN 60519-1:2011 - Safety in electroheating installations - Part 1: General requirements (IEC 60519-1:2010)

Relations

• Replaces: EN 60519-1:2003 - Safety in electroheat installations - Part 1: General requirements
• Effective Date: 29-Jan-2023
• Replaced By: EN 60519-1:2015 - Safety in installations for electroheating and electromagnetic processing - Part 1: General requirements
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-april-2011
1DGRPHãþD
SIST EN 60519-1:2004
9DUQRVWSULHOHNWULþQLKJUHOQLKLQãWDODFLMDKGHO6SORãQH]DKWHYH,(&

Safety in electroheating installations - Part 1: General requirements (IEC 60519-1:2010)
Sicherheit in Elektrowärmeanlagen - Teil 1: Allgemeine Anforderungen (IEC 60519-
1:2010)
Sécurité dans les installations électrothermiques - Partie 1: Exigences générales (CEI
60519-1:2010)
Ta slovenski standard je istoveten z: EN 60519-1:2011
ICS:
25.180.10 (OHNWULþQHSHþL Electric furnaces
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD
EN 60519-1
NORME EUROPÉENNE
January 2011
EUROPÄISCHE NORM
ICS 25.180.10 Supersedes EN 60519-1:2003

English version
Safety in electroheating installations -
Part 1: General requirements
(IEC 60519-1:2010)
Sécurité dans les installations Sicherheit in Elektrowärmeanlagen -
électrothermiques - Teil 1: Allgemeine Anforderungen
Partie 1: Exigences générales (IEC 60519-1:2010)
(CEI 60519-1:2010)
This European Standard was approved by CENELEC on 2011-01-03. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus,
the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy,
Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia,
Spain, Sweden, Switzerland and the United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Management Centre: Avenue Marnix 17, B - 1000 Brussels

© 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60519-1:2011 E
Foreword
The text of document 27/770/FDIS, future edition 4 of IEC 60519-1, prepared by IEC TC 27, Industrial
electroheating, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as
EN 60519-1 on 2011-01-03.
This European Standard supersedes EN 60519-1:2003.
The main technical changes with respect to EN 60519-1:2003 are as follows:
– scope and object have been modified, voltage limits and classification removed;
– terms/definitions, Annex ZA and bibliography have been updated and completed;
– Clause 4 on classification of equipment according to process frequency has been modified;
– Clause 5 (General requirements) has been redrafted and new provisions have been added (e.g.
relating to single fault conditions and EMF issues), following the recommendations of IEC Guide 104;
– Clause 8 has been redrafted, the contents of subclauses 8.2 and 8.3 has been moved to a new
normative Annex A and 8.4 has been deleted;
– a new Clause 12 (Protection against other hazards) has been added;
– clauses dealing with marking and documentation have been amended.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent
rights.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2011-10-03
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2014-01-03
Annex ZA has been added by CENELEC.
__________
Endorsement notice
The text of the International Standard IEC 60519-1:2010 was approved by CENELEC as a European
Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards indicated:
IEC 60398:1999 NOTE  Harmonized as EN 60398:1999 (not modified).
IEC 61000-3-2 NOTE  Harmonized as EN 61000-3-2.
IEC 61000-3-3 NOTE  Harmonized as EN 61000-3-3.
IEC 61000-3-11 NOTE  Harmonized as EN 61000-3-11.
IEC 61000-6-2 NOTE  Harmonized as EN 61000-6-2.
IEC 62311:2007 NOTE  Harmonized as EN 62311:2008 (modified).
ISO 12100-1:2003 NOTE  Harmonized as EN ISO 12100-1:2003 (not modified).

- 3 - EN 60519-1:2011
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications

The following referenced documents are indispensable for the application of this document. For dated
references, only the edition cited applies. For undated references, the latest edition of the referenced
document (including any amendments) applies.

NOTE  When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD
applies.
Publication Year Title EN/HD Year

IEC 60050-841 2004 International Electrotechnical Vocabulary - -
(IEV) -
Part 841: Industrial electroheat

IEC 60071-1 - Insulation co-ordination - EN 60071-1 -
Part 1: Definitions, principles and rules

IEC 60110-1 1998 Power capacitors for induction heating EN 60110-1 1998
installations -
Part 1: General
IEC 60204-1 (mod) 2005 Safety of machinery - Electrical equipment of EN 60204-1 2006
+ A1 2008 machines - + corr. February 2010
Part 1: General requirements + A1 2009

IEC 60204-11 - Safety of machinery - Electrical equipment of EN 60204-11 -
machines -
Part 11: Requirements for HV equipment for
voltages above 1 000 V a.c. or 1 500 V d.c.
and not exceeding 36 kV
IEC 60364-1 (mod) 2005 Low-voltage electrical installations - HD 60364-1 2008
Part 1: Fundamental principles, assessment
of general characteristics, definitions

IEC 60364-4-41 - Low-voltage electrical installations - HD 60364-4-41 -
(mod) Part 4-41: Protection for safety - Protection
against electric shock
IEC 60364-4-42 - Low voltage electrical installations - HD 60364-4-42 -
Part 4-42: Protection for safety - Protection
against thermal effects
IEC 60364-4-43 - Low voltage electrical installations - HD 60364-4-43 -
(mod) Part 4-43: Protection for safety - Protection
against overcurrent
IEC 60364-5-53 - Electrical installations of buildings - - -
Part 5-53: Selection and erection of electrical
equipment - Isolation, switching and control

IEC 60364-5-54 - Electrical installations of buildings - HD 60364-5-54 -
(mod) Part 5-54: Selection and erection of electrical
equipment - Earthing arrangements,
protective conductors and protective bonding
conductors
IEC 60417 - Graphical symbols for use on equipment - -

Publication Year Title EN/HD Year

IEC 60446 - Basic and safety principles for man-machine EN 60446 -
interface, marking and identification -
Identification of conductors by colours or
alphanumerics
IEC 60529 - Degrees of protection provided by enclosures - -
(IP Code)
IEC 60664-1 - Insulation coordination for equipment within EN 60664-1 -
low-voltage systems -
Part 1: Principles, requirements and tests

IEC 61140 - Protection against electric shock - Common EN 61140 -
aspects for installation and equipment

IEC 61936-1 (mod) - Power installations exceeding 1 kV a.c. - EN 61936-1 -
Part 1: Common rules
CISPR 11 (mod) - Industrial, scientific and medical equipment - EN 55011 -
Radio-frequency disturbance characteristics -
Limits and methods of measurement

ISO 3864-1 - Graphical symbols - Safety colours and safety - -
signs -
Part 1: Design principles for safety signs in
workplaces and public areas
ISO 7000 - Graphical symbols for use on equipment - - -
Index and synopsis
IEC 60519-1 ®
Edition 4.0 2010-11
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
Safety in electroheating installations –
Part 1: General requirements
Sécurité dans les installations électrothermiques –
Partie 1: Exigences générales
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
PRICE CODE
INTERNATIONALE
V
CODE PRIX
ICS 25.180.10 ISBN 978-2-88912-264-6
– 2 – 60519-1 Ó IEC:2010
CONTENTS
FOREW ORD . 4
INTRODUCTION . 6
1 Scope and object . 7
2 Normativ e references . 8
3 Terms and definitions . 9
4 Classification of electroheating equipment . 15
4.1 General . 15
4.2 Classification of electroheating equipment according to process frequency . 15
4.2.1 Direct current equipment . 15
4.2.2 Low-frequency equipment. 16
4.2.3 Mains-frequency equipment . 16
4.2.4 Medium-frequency equipment . 16
4.2.5 High-frequency equipment . 16
4.2.6 Microwave equipment . 16
4.2.7 Infrared equipment . 16
5 General requirements . 16
5.1 General . 16
5.2 Electroheating equipment . 17
5.3 Electric equipment of electroheating installations . 18
5.4 Electrostatic charges . 19
5.5 Magnetic, electric and electromagnetic fields . 19
5.6 Electromagnetic compatibility . 19
5.7 Ionizing radiation . 20
5.8 Liquid cooling . 20
6 Isolation and switching . 20
6.1 General . 20
6.2 Switching-off of control and auxiliary circuits . 21
6.3 Switching at high voltage levels . 21
7 Connection to the electrical supply network and internal connections . 21
7.1 General requirements . 21
7.2 Fixed electric connection . 22
7.3 Removable connection and flexible conductors . 22
8 Protection against electric shock . 22
8.1 General . 22
8.2 Direct contact – special measures. 23
8.3 Indirect contact – special measures . 23
9 Equipotential bonding . 23
9.1 General . 23
9.2 Protective bonding circuits . 23
9.2.1 General. 23
9.2.2 Protective conductors . 23
9.2.3 Continuity of the protective bonding system. 23
9.2.4 Exclusion of switching devices from the protective bonding system . 23
9.2.5 Parts that need not be connected to the protective bonding system . 23
9.2.6 Interruption of the protective bonding system . 24

60519-1 Ó IEC:2010 – 3 –
9.2.7 Protective conductor connecting points . 24
9.2.8 Protective bonding for electroheating installations with earth
leakage current above 10 mA . 24
9.3 Functional bonding .
...