EN 60934:2001

Circuit-breakers for equipment (CBE)

Applicable to mechanical switching devices designed as 'circuit-breakers for equipment' (CBE) intended to provide protection to circuits within electrical equipment for a.c. not exceeding 440 V and/or d.c. not exceeding 250 V, and a rated current not exceeding 125 A.

Geräteschutzschalter (GS)

Disjoncteurs pour équipement (DPE)

S'applique aux dispositifs mécaniques de coupure désignés sous le nom de "disjoncteurs pour équipement" (DPE) destinés à la protection interne des équipements électriques pour des tensions n'excédant pas 440 V en courant alternatif et/ou 250 V en courant continu et un courant assigné n'excédant pas 125 A.

Odklopniki za opremo (CBE) (IEC 60934:2000)

Ta mednarodni standard se uporablja za mehanske stikalne naprave, ki so izdelane kot »odklopniki za opremo« (CBE), ki se uporabljajo za zaščito tokokrogov znotraj električne opreme.
OPOMBA 1: Izraz »oprema« vključuje aparate.
OPOMBA 2: Zaščiteni deli so navadno motorji, transformatorji, notranje ožičenje itd. Odklopniki za opremo imajo lahko višjo nazivno kratkostično zmogljivost, kot se zahteva v pogojih preobremenitve, in lahko imajo pogojno kratkostično tokovno obremenljivost v povezavi z določeno napravo za zaščito pred kratkim stikom (SCPD). Ta standard se uporablja tudi za stikalne naprave za zaščito električne opreme v primeru podnapetosti in/ali prenapetosti. Uporablja se za izmenični tok, ki ne presega 440 V, in/ali enosmerni tok, ki ne presega 250 V, ter nazivni tok, ki ne presega 125 A. Ta standard zajema odklopnike za opremo, ki so namenjeni za:
– samodejno prekinitev in nesamodejno ali samodejno obnovitev;
– samodejno prekinitev, nesamodejno ali samodejno obnovitev in ročne stikalne operacije. Zajema tudi stikala odklopnikov za opremo, v katerih so sredstva za samodejno prekinitev ovirana ali ob izdelavi niso prisotna (glej točko 3.1.3). OPOMBA 3: Ta standard se lahko uporablja tudi kot vodilni dokument za izmenične napetosti do 630 V. OPOMBA 4: Zahteve za odklopnike za opremo, ki so primerni za izolacijo, so v obravnavi. Ta standard vsebuje vse zahteve, ki so nujne za zagotovitev skladnosti z obratovalnimi značilnostmi, ki so za te naprave zahtevane v tipskih preskusih. Vsebuje tudi podrobnosti glede preskusnih zahtev in metod preskušanja, ki so nujne za zagotovitev ponovljivosti rezultatov preskusov.

General Information

• Status: Withdrawn
• Publication Date: 25-Jan-2001
• Withdrawal Date: 31-Oct-2003
• ICS: 29.120.40 - Switches
• ICS: 29.120.50 - Fuses and other overcurrent protection devices
• Technical Committee: CLC/TC 23E - Circuit breakers and similar devices for household and similar applications
• Drafting Committee: IEC/SC 23E - IEC_SC_23E
• Parallel Committee: IEC/SC 23E - IEC_SC_23E
• Current Stage: 9960 - Withdrawal effective - Withdrawal
• Start Date: 20-Sep-2022
• Completion Date: 20-Sep-2022
• Directive: 2006/95/EC - Directive 2006/95/EC of the European Parliament and of the Council of 12 December 2006 on the harmonisation of the laws of Member States relating to electrical equipment designed for use within certain voltage limits (codified version)
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Directive: 73/23/EEC - Electrical equipment designed for use within certain voltage limits
• Ref Project: SIST EN 60934:2003 - Circuit-breakers for equipment (CBE)

Relations

• Replaces: EN 60934:1994/A11:1998 - Circuit-breakers for equipment (CBE)
• Effective Date: 28-Jan-2023
• Replaces: EN 60934:1994/A2:1997 - Circuit-breakers for equipment (CBE)
• Effective Date: 28-Jan-2023
• Replaces: EN 60934:1994/A1:1994 - Circuit-breakers for equipment (CBE)
• Effective Date: 28-Jan-2023
• Replaced By: EN IEC 60934:2019 - Circuit breakers for equipment (CBE)
• Effective Date: 23-Jan-2023
• Amended By: EN 60934:2001/A2:2013 - Circuit-breakers for equipment (CBE)
• Effective Date: 28-Jan-2023
• Amended By: EN 60934:2001/A1:2007 - Circuit-breakers for equipment (CBE)
• Effective Date: 28-Jan-2023

Standards Content (Sample)

SLOVENSKI STANDARD
01-marec-2003
1DGRPHãþD
SIST EN 60934:1996
SIST EN 60934:1996/A11:1999
SIST EN 60934:1996/A2:1997
Odklopniki za opremo (CBE) (IEC 60934:2000)
Circuit-breakers for equipment (CBE)
Geräteschutzschalter (GS)
Disjoncteurs pour équipement (DPE)
Ta slovenski standard je istoveten z: EN 60934:2001
ICS:
29.120.40 Stikala Switches
29.120.50 9DURYDONHLQGUXJD Fuses and other overcurrent
PHGWRNRYQD]DãþLWD protection devices
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

EUROPEAN STANDARD EN 60934
NORME EUROPÉENNE
EUROPÄISCHE NORM January 2001
ICS 29.120.40;29.120.50 Supersedes EN 60934:1994 + A1:1994 + A2:1997 + A11:1998
English version
Circuit-breakers for equipment (CBE)
(IEC 60934:2000)
Disjoncteurs pour équipement (DPE) Geräteschutzschalter (GS)
(CEI 60934:2000) (IEC 60934:2000)
This European Standard was approved by CENELEC on 2000-11-01. CENELEC members are bound
to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this
European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and
notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic,
Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway,
Portugal, Spain, Sweden, Switzerland and United Kingdom.
CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
Central Secretariat: rue de Stassart 35, B - 1050 Brussels
© 2001 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 60934:2001 E
Foreword
The text of document 23E/430/FDIS, future edition 3 of IEC 60934, prepared by SC 23E,
Circuit-breakers and similar equipment for household use, of IEC TC 23, Electrical accessories, was
submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60934 on
2000-11-01.
This European Standard supersedes EN 60934:1994 + A1:1994 + A2:1997 + A11:1998.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2001-08-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2003-11-01
Annexes designated "normative" are part of the body of the standard.
Annexes designated "informative" are given for information only.
In this standard, annexes A, B, C, D, E, G, H, J, K and ZA are normative and annex F is informative.
Annex ZA has been added by CENELEC.
In this standard the following print types are used:
- requirements: in roman type;
- test specifications: in italic type;
- notes: in smaller roman type.
__________
Endorsement notice
The text of the International Standard IEC 60934:2000 was approved by CENELEC as a European
Standard without any modification.
__________
- 3 - EN 60934:2001
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
This European Standard incorporates by dated or undated reference, provisions from other
publications. These normative references are cited at the appropriate places in the text and the
publications are listed hereafter. For dated references, subsequent amendments to or revisions of
any of these publications apply to this European Standard only when incorporated in it by
amendment or revision. For undated references the latest edition of the publication referred to
applies (including amendments).
NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
Publication Year Title EN/HD Year
IEC 60050-151 1978 International Electrotechnical Vocabulary--
(IEV)
Chapter 151: Electrical and magnetic
devices
IEC 60050-441 1984 Chapter 441: Switchgear, controlgear and--
fuses
IEC 60050-604 1987 Chapter 604: Generation, transmission--
and distribution of electricity - Operation
IEC 60050-826 1982 Chapter 826: Electrical installations of
buildings
+ A1 1990
+ A2 1995
+ A3 1999 HD 384.2 S2 2001
IEC 60060-1 1989 High-voltage test techniques HD 588.1 S1 1991
+ corr. March 1990 Part 1: General definitions and test
requirements
1)
IEC 60068-2-20 1979 Basic environmental testing procedures HD 323.2.20 S3 1988
Part 2: Tests - Test T: Soldering
IEC 60099-1 1991 Surge arresters EN 60099-1 1994
Part 1: Non-linear resistor type gapped
surge arresters for a.c. systems
2)
IEC 60227 Series Polyvinyl chloride insulated cables of HD 21 Series
rated voltages up to and including
450/750 V
IEC 60269 Series Low-voltage fuses EN 60269 Series

1)
HD 323.2.20 S3 includes A2:1987 to IEC 60068-2-20.
2)
The HD 21 series is related to but not equivalent to the IEC 60227 series.

Publication Year Title EN/HD Year
IEC 60417-1 1998 Graphical symbols for use on equipment EN 60417-1 1999
Part 1: Overview and application
IEC 60529 1989 Degrees of protection provided by EN 60529 1991
enclosures (IP Code) + corr May 1993
IEC 60664 Series Insulation coordination for equipment--
within low-voltage systems
IEC 60664-1 1992 Part 1: Principles, requirements and tests HD 625.1 S1 1996
(mod) + corr. November 1996
IEC 60664-3 1992 Part 3: Use of coatings to achieve HD 625.3 S1 1997
insulation coordination of printed board
assemblies
3)
IEC 60695-2-1/X Series Fire hazard testing EN 60695-2-1/X Series
Part 2: Test methods - Section 1: Glow-
wire test methods
4)
IEC 60898 1995 Electrical accessories - Circuit-breakers--
for overcurrent protection for household
and similar installations
IEC 60947-1 1999 Low-voltage switchgear and controlgear EN 60947-1 1999
(mod) Part 1: General rules + corr. October 1999
IEC 60950 (mod) 1999 Safety of information technology EN 60950 2000
+ corr. January 2000 equipment
IEC 61000-4-2 1995 Electromagnetic compatibility (EMC) EN 61000-4-2 1995
Part 4-2: Testing and measurement
techniques - Electrostatic discharge
immunity test
IEC 61000-4-3
1995 Part 4-3: Testing and measurement EN 61000-4-3 1996
(mod)
techniques - Radiated, radio-frequency,
electromagnetic field immunity test
IEC 61000-4-4 1995 Part 4-4: Testing and measurement EN 61000-4-4 1995
techniques - Electrical fast transient/burst
immunity test
IEC 61000-4-5 1995 Part 4-5: Testing and measurement EN 61000-4-5 1995
techniques - Surge immunity test
CISPR 22 (mod) 1997 Information technology equipment - Radio EN 55022 1998
disturbance characteristics - Limits and + corr. August 1999
methods of measurement
3)
EN 60695-2-1/X:1996 are superseded by EN 60695-2-10:2001 to EN 60695-2-13:2001, which are based on
IEC 60695-2-10:2000 to IEC 60685-2-13:2000.
4)
IEC 60898:1987 + corrigendum May 1988 + A2:1990 + A3:1990 + corrigendum August 1990, mod., are harmonized as
EN 60898:1991. This European Standard applies with its corrigendum October 1991 and its amendments A1:1991
(IEC/A1:1989) and A11:1994 up to A19:2000.

NORME CEI
INTERNATIONALE IEC
INTERNATIONAL
Troisième édition
STANDARD
Third edition
2000-10
Disjoncteurs pour équipement (DPE)
Circuit-breakers for equipment (CBE)
 IEC 2000 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in
utilisée sous quelque forme que ce soit et par aucun procédé, any form or by any means, electronic or mechanical,
électronique ou mécanique, y compris la photocopie et les including photocopying and microfilm, without permission in
microfilms, sans l'accord écrit de l'éditeur. writing from the publisher.
International Electrotechnical Commission 3, rue de Varembé Geneva, Switzerland
Telefax: [phone] e-mail: [e-mail] IEC web site http://www.iec.ch
CODE PRIX
Commission Electrotechnique Internationale
XE
PRICE CODE
International Electrotechnical Commission
Pour prix, voir catalogue en vigueur
For price, see current catalogue

60934  IEC:2000 – 3 –
CONTENTS
Page
FOREWORD .11
Clause
1 Scope and object . 15
2 Normative references. 15
3 Definitions. 19
3.1 Definitions related to protection and switching devices. 19
3.2 General terms. 21
3.3 Definitions related to current . 23
3.4 Definitions related to voltage. 25
3.5 Definitions related to constructional elements of a CBE . 27
3.6 Definitions related to releases in CBEs . 29
3.7 Definitions related to insulation and clearances in a CBE. 31
3.8 Definitions related to operation of CBEs. 35
3.9 Definitions related to the operating characteristic of CBEs . 39
3.10 Definitions related to characteristic quantities . 39
3.11 Definitions concerning coordination of CBEs and SCPDs associated
in the same circuit. 41
3.12 Definitions related to terminals and terminations. 43
3.13 Definitions related to tests . 49
4 Classification .49
4.1 Quantity of poles. 49
4.2 Method of mounting . 49
4.3 Method of connection. 49
4.4 Method of operation. 51
4.5 Mode of tripping. 51
4.6 Influence of the ambient temperature. 51
4.7 Trip-free behaviour . 53
4.8 Influence of the mounting position. 53
4.9 Electrical performance . 53
5 Characteristics of CBEs . 53
5.1 List of characteristics . 53
5.2 Rated quantities. 53
5.3 Standard and preferred values. 57
6 Marking and other product information . 59
7 Standard conditions for operation in service. 61
7.1 Ambient air temperature . 61
7.2 Altitude . 61
7.3 Atmospheric conditions. 63
8 Requirements for construction and operation . 63
8.1 Mechanical design . 63
8.2 Protection against electric shock. 87
8.3 Temperature-rise . 87
8.4 Dielectric properties. 89
8.5 Conditions for automatic operation. 91
8.6 Electrical performance . 95

60934  IEC:2000 – 5 –
Clause Page
8.7 Performance under conditional short-circuit current conditions. 95
8.8 Resistance to mechanical shock and impact . 95
8.9 Resistance to heat . 95
8.10 Resistance to abnormal heat and to fire.
...