EN 61010-2-051:2015
(Main)Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
IEC 61010-2-051:2015 is applicable to electrically operated laboratory equipment and its accessories for mechanical mixing and stirring, where mechanical energy influences the shape or size or homogeneity of materials and their accessories. Such devices may contain heating elements. It has the status of a group safety publication in accordance with IEC Guide 104. This third edition cancels and replaces the second edition published in 2003. It constitutes a technical revision and includes the following change from the second edition: - exclusion of equipment, whose size and weight make unintentional movement unlikely, from the drop test in Clause 8, - added requirement for interlock systems containing electric/electronic or programmable components to Clause 15, - notes have been re-phrased according to ISO/IEC Directives.
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-051: Besondere Anforderungen an Laborgeräte zum Mischen und Rühren
Règles de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-051: Exigences particulières pour appareils de laboratoire utilisés pour mixer et agiter
L'IEC 61010-2-051:2015 est applicable aux appareils de laboratoire électriques et à leurs accessoires, destinés à mélanger et à agiter, et qui, par l'énergie mécanique dispensée, modifient la forme, la taille ou l'homogénéité des matériaux et de leurs accessoires. De tels appareils peuvent contenir des éléments de chauffage. Elle a le statut d'une publication groupée de sécurité conformément au Guide IEC 104. Cette troisième édition annule et remplace la deuxième édition parue en 2003. Cette édition constitue une révision technique et inclut les modifications suivantes par rapport à la deuxième édition: - exclusion des appareils dont la taille et le poids rendent peu probables les mouvements involontaires, de l'essai de chute à l'Article 8, - ajout de l'exigence à l'Article 15, pour les systèmes de verrouillage contenant des composants électriques/électroniques ou programmables, - reformulation des notes selon les Directives ISO/IEC.
Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-051. del: Posebne zahteve za laboratorijsko opremo za mešanje in premešavanje (IEC 61010-2-051:2015)
Ta del standarda IEC 61010 velja za električno upravljano laboratorijsko opremo in njeno dodatno opremo za mehansko mešanje in premešavanje, kjer mehanska energija vpliva na obliko ali velikost ali homogenost materialov in njihovih pripomočkov. Take naprave lahko vsebujejo grelne elemente.
OPOMBA Če vsa oprema ali njen del sodi v okvir enega ali več drugih delov standarda IEC 61010 in v okvir tega standarda, bo treba upoštevati tudi zahteve teh drugih delov standardov. Standard za opremo, ki vsebuje grelne elemente, je IEC 61010-2-010.
General Information
Relations
Standards Content (Sample)
SLOVENSKI STANDARD
01-september-2015
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RULQODERUDWRULMVNR
XSRUDERGHO 3RVHEQH]DKWHYH]DODERUDWRULMVNRRSUHPR]DPHãDQMHLQ
SUHPHãDYDQMH ,(&
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
(IEC 61010-2-051:2015)
6LFKHUKHLWVEHVWLPPXQJHQIUHOHNWULVFKH0HVV6WHXHU5HJHOXQG/DERUJHUlWH7HLO
%HVRQGHUH$QIRUGHUXQJHQDQ/DERUJHUlWH]XP0LVFKHQXQG5KUHQ
,(&
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire -- Partie 2-051: Prescriptions particulières pour appareils de laboratoire
utilisés pour mixer et agiter (IEC 61010-2-051:2015)
Ta slovenski standard je istoveten z: EN 61010-2-051:2015
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.
EUROPEAN STANDARD EN 61010-2-051
NORME EUROPÉENNE
EUROPÄISCHE NORM
April 2015
ICS 19.080; 71.040.20 Supersedes EN 61010-2-051:2003
English Version
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-051: Particular requirements
for laboratory equipment for mixing and stirring
(IEC 61010-2-051:2015)
Règles de sécurité pour appareils électriques de mesurage, Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
de régulation et de laboratoire - Partie 2-051: Exigences Regel- und Laborgeräte - Teil 2-051: Besondere
particulières pour appareils de laboratoire utilisés pour Anforderungen an Laborgeräte zum Mischen und Rühren
mixer et agiter (IEC 61010-2-051:2015)
(IEC 61010-2-051:2015)
This European Standard was approved by CENELEC on 2015-04-14. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia,
Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
© 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
Ref. No. EN 61010-2-051:2015 E
Foreword
The text of document 66/552/FDIS, future edition 3 of IEC 61010-2-051, prepared by
IEC/TC 66 "Safety of measuring, control and laboratory equipment" was submitted to the
IEC-CENELEC parallel vote and approved by CENELEC as EN 61010-2-051:2015.
The following dates are fixed:
(dop) 2016-01-14
• latest date by which the document has to be
implemented at national level by
publication of an identical national
standard or by endorsement
• latest date by which the national (dow) 2018-04-14
standards conflicting with the
document have to be withdrawn
This document supersedes EN 61010-2-051:2003.
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC [and/or CEN] shall not be held responsible for identifying any or all such
patent rights.
This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment
Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC).
Endorsement notice
The text of the International Standard IEC 61010-2-051:2015 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following note has to be added for the standard indicated:
The Bibliography of Part 1 is applicable, except as follows:
IEC 60079 (series) NOTE Harmonized as EN 60079 (series).
IEC 61010-2-010 NOTE Harmonized as EN 61010-2-010.
- 3 - EN 61010-2-051:2015
Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents, in whole or in part, are normatively referenced in this document and are
indispensable for its application. For dated references, only the edition cited applies. For undated
references, the latest edition of the referenced document (including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant
EN/HD applies.
NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.
Annex ZA of Part 1 applies.
Addition
Publication Year Title EN/HD Year
IEC 62061 - Safety of machinery - Functional safety of EN 62061 -
safety-related electrical, electronic and
programmable electronic control systems
- - +corrigendum Feb. -
ISO 13849 series Safety of machinery - Safety-related parts EN ISO 13849 series
of control systems
IEC 61010-2-051 ®
Edition 3.0 2015-03
INTERNATIONAL
STANDARD
NORME
INTERNATIONALE
GROUP SAFETY PUBLICATION
PUBLICATION GROUPÉE DE SÉCURITÉ
Safety requirements for electrical equipment for measurement, control, and
laboratory use –
Part 2-051: Particular requirements for laboratory equipment for mixing and
stirring
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire –
Partie 2-051: Exigences particulières pour appareils de laboratoire utilisés pour
mixer et agiter
INTERNATIONAL
ELECTROTECHNICAL
COMMISSION
COMMISSION
ELECTROTECHNIQUE
INTERNATIONALE
ICS 19.080, 71.040.20 ISBN 978-2-8322-2297-3
– 2 – IEC 61010-2-051:2015 © IEC 2015
CONTENTS
FOREWORD . 3
1 Scope and object . 5
2 Normative references . 5
3 Terms and definitions . 5
4 Tests . 5
5 Marking and documentation . 5
6 Protection against electric shock . 6
7 Protection against mechanical HAZARDS . 6
8 Resistance to mechanical stresses . 7
9 Protection against the spread of fire . 8
10 Equipment temperature limits and resistance to heat . 8
11 Protection against HAZARDS from fluids . 8
12 Protection against radiation, including laser sources, and against sonic and
ultrasonic pressure . 8
13 Protection against liberated gases and substances, explosion and implosion . 8
14 Components and subassemblies . 8
15 Protection by interlocks . 8
16 HAZARDS resulting from application . 9
17 RISK Assessment . 9
Annexes . 10
Bibliography . 10
IEC 61010-2-051:2015 © IEC 2015 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________
SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT
FOR MEASUREMENT, CONTROL, AND LABORATORY USE –
Part 2-051: Particular requirements for laboratory
equipment for mixing and stirring
FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
Publications.
8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
indispensable for the correct application of this publication.
9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
International Standard IEC 61010-2-051 has been prepared by IEC technical committee 66:
Safety of measuring, control and laboratory equipment.
It has the status of a group safety publication in accordance with IEC Guide 104.
This third edition cancels and replaces the second edition published in 2003. It constitutes a
technical revision and includes the following change from the second edition:
• exclusion of equipment, whose size and weight make unintentional movement unlikely,
from the drop test in Clause 8,
• added requirement for interlock systems containing electric/electronic or programmable
components to Clause 15,
• notes have been re-phrased according to ISO/IEC Directives.
– 4 – IEC 61010-2-051:2015 © IEC 2015
The text of this standard is based on the following documents:
FDIS Report on v
...
Questions, Comments and Discussion
Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.