SIST EN IEC 61010-2-051:2021

Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2018)

This part of IEC 61010 is applicable to electrically operated laboratory equipment and its
accessories for mechanical mixing and stirring, where mechanical energy influences the
shape or size or homogeneity of materials and their accessories. Such devices can contain
heating elements.
NOTE If all or part of the equipment falls within the scope of one or more other Part 2 standards of the IEC 61010
series as well as within the scope of this document, consideration is given to those other Part 2 standards. The
standard for equipment which contains heating devices is IEC 61010-2-010

Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2-051: Besondere Anforderungen an Laborgeräte zum Mischen und Rühren (IEC 61010-2-051:2018)

Exigences de sécurité pour appareils électriques de mesurage, de régulation et de laboratoire - Partie 2-051 : Exigences particulières pour appareils de laboratoire utilisés pour mélanger et agiter (IEC 61010-2-051:2018)

NEW!IEC 61010-2-051:2018 est disponible sous forme de IEC 61010-2-051:2018 RLV qui contient la Norme internationale et sa version Redline, illustrant les modifications du contenu technique depuis l'édition précédente.

L’IEC 61010-2-051:2018 est applicable aux appareils de laboratoire électriques et à leurs accessoires, destinés à mélanger et à agiter, et qui, par l’énergie mécanique dispensée, modifient la forme, la taille ou l’homogénéité des matériaux et de leurs accessoires. De tels appareils peuvent contenir des éléments de chauffage. Elle a le statut d'une publication groupée de sécurité conformément au Guide IEC 104. Cette quatrième édition annule et remplace la troisième édition parue en 2015. Cette édition constitue une révision technique. Cette édition inclut les modifications techniques majeures suivantes par rapport à l'édition précédente:
- adaptation des modifications introduites par l’Amendement 1 de l’IEC 61010-1;
- ajout à l’Article 6 de la tolérance pour la stabilité du matériel d’essai en tension alternative;
- ajout à l’Article 17 de l’appréciation du risque exigée pour le matériel destiné à être utilisé avec des fluides inflammables, dangereux ou toxiques.
Cette partie 2-051 est destinée à être utilisée conjointement avec l'IEC 61010-1. Elle a été établie sur la base de la troisième édition (2010) et de son Amendement 1 (2016).

Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko uporabo - 2-051. del: Posebne zahteve za laboratorijsko opremo za mešanje in premešavanje (IEC 61010-2-051:2018)

General Information

• Status: Published
• Public Enquiry End Date: 15-Feb-2018
• Publication Date: 27-Oct-2021
• ICS: 19.080 - Electrical and electronic testing
• ICS: 71.040.10 - Chemical laboratories. Laboratory equipment
• Technical Committee: MOV - Measuring equipment for electromagnetic quantities
• Current Stage: 6060 - National Implementation/Publication (Adopted Project)
• Start Date: 15-Sep-2021
• Due Date: 20-Nov-2021
• Completion Date: 28-Oct-2021
• Directive: 2014/35/EU - Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits
• Directive: 2014/53/EU - Directive 2014/53/EU of The European Parliament and of the Council of 16 April 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of radio equipment and repealing Directive 1999/5/EC
• Ref Project: EN IEC 61010-2-051:2021 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring

Relations

• Amended By: SIST EN IEC 61010-2-051:2021/A11:2021 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
• Effective Date: 03-Mar-2020
• Replaces: SIST EN 61010-2-051:2015 - Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring (IEC 61010-2-051:2015)
• Effective Date: 14-Sep-2021

Standards Content (Sample)

SLOVENSKI STANDARD
SIST EN IEC 61010-2-051:2021
01-december-2021
Nadomešča:
SIST EN 61010-2-051:2015
Varnostne zahteve za električno opremo za meritve, nadzor in laboratorijsko
uporabo - 2-051. del: Posebne zahteve za laboratorijsko opremo za mešanje in
premešavanje (IEC 61010-2-051:2018)
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
(IEC 61010-2-051:2018)
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-051: Besondere Anforderungen an Laborgeräte zum Mischen und Rühren
(IEC 61010-2-051:2018)
Exigences de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-051 : Exigences particulières pour appareils de laboratoire utilisés
pour mélanger et agiter (IEC 61010-2-051:2018)
Ta slovenski standard je istoveten z: EN IEC 61010-2-051:2021
ICS:
19.080 Električno in elektronsko Electrical and electronic
preskušanje testing
71.040.10 Kemijski laboratoriji. Chemical laboratories.
Laboratorijska oprema Laboratory equipment
SIST EN IEC 61010-2-051:2021 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST EN IEC 61010-2-051:2021

---------------------- Page: 2 ----------------------
SIST EN IEC 61010-2-051:2021


EUROPEAN STANDARD EN IEC 61010-2-051

NORME EUROPÉENNE

EUROPÄISCHE NORM
September 2021
ICS 19.080; 71.040.20 Supersedes EN 61010-2-051:2015 and all of its
amendments and corrigenda (if any)
English Version
Safety requirements for electrical equipment for measurement,
control and laboratory use - Part 2-051: Particular requirements
for laboratory equipment for mixing and stirring
(IEC 61010-2-051:2018)
Exigences de sécurité pour appareils électriques de Sicherheitsbestimmungen für elektrische Mess-, Steuer-,
mesurage, de régulation et de laboratoire - Partie 2-051 : Regel- und Laborgeräte -Teil 2-051: Besondere
Exigences particulières pour appareils de laboratoire Anforderungen an Laborgeräte zum Mischen und Rühren
utilisés pour mélanger et agiter (IEC 61010-2-051:2018)
(IEC 61010-2-051:2018)
This European Standard was approved by CENELEC on 2018-11-09. CENELEC members are bound to comply with the CEN/CENELEC
Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC
Management Centre or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation
under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the
same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2021 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. EN IEC 61010-2-051:2021 E

---------------------- Page: 3 ----------------------
SIST EN IEC 61010-2-051:2021
EN IEC 61010-2-051:2021 (E)
European foreword
The text of document 66/642/CDV, future edition 4 of IEC 61010-2-051, prepared by IEC/TC 66
"Safety of measuring, control and laboratory equipment" was submitted to the IEC-CENELEC parallel
vote and approved by CENELEC as EN IEC 61010-2-051:2021.
The following dates are fixed:
• latest date by which the document has to be implemented at national (dop) 2022-08-02
level by publication of an identical national standard or by endorsement
• latest date by which the national standards conflicting with the (dow) 2024-08-02
document have to be withdrawn
This document supersedes EN 61010-2-051:2015 and all of its amendments and corrigenda (if any).
Attention is drawn to the possibility that some of the elements of this document may be the subject of
patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights.
This document has been prepared under a Standardization Request given to CENELEC by the
European Commission and the European Free Trade Association, and supports essential
requirements of EU Directive(s) / Regulation(s).
For the relationship with EU Directive(s) / Regulation(s), see informative Annex ZZ, which is an
integral part of EN IEC 61010-2-051:2021/A11:2021.
Any feedback and questions on this document should be directed to the users’ national committee. A
complete listing of these bodies can be found on the CENELEC website.
Endorsement notice
The text of the International Standard IEC 61010-2-051:2018 was approved by CENELEC as a
European Standard without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 61010-2-010 NOTE Harmonized as EN IEC 61010-2-010
IEC 62061 NOTE Harmonized as EN 62061
ISO 13849 (series) NOTE Harmonized as EN ISO 13849 (series)
2

---------------------- Page: 4 ----------------------
SIST EN IEC 61010-2-051:2021



IEC 61010-2-051

®


Edition 4.0 2018-10




INTERNATIONAL



STANDARD




NORME


INTERNATIONALE





GROUP SAFETY PUBLICATION

PUBLICATION GROUPÉE DE SÉCURITÉ






Safety requirements for electrical equipment for measurement, control, and

laboratory use –

Part 2-051: Particular requirements for laboratory equipment for mixing and


stirring



Exigences de sécurité pour appareils électriques de mesurage, de régulation, et


de laboratoire –

Partie 2-051: Exigences particulières pour appareils de laboratoire utilisés pour

mélanger et agiter










INTERNATIONAL

ELECTROTECHNICAL

COMMISSION


COMMISSION

ELECTROTECHNIQUE

INTERNATIONALE




ICS 19.080; 71.040.20 ISBN 978-2-8322-6061-6




Warning! Make sure that you obtained this publication from an authorized distributor.

Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agréé.

® Registered trademark of the International Electrotechnical Commission
Marque déposée de la Commission Electrotechnique Internationale

---------------------- Page: 5 ----------------------
SIST EN IEC 61010-2-051:2021
– 2 – IEC 61010-2-051:2018 © IEC 2018
CONTENTS
FOREWORD . 3
1 Scope and object . 5
2 Normative references. 5
3 Terms and definitions . 5
4 Tests . 5
5 Marking and documentation . 5
6 Protection against electric shock . 6
7 Protection against mechanical HAZARDS . 6
8 Resistance to mechanical stresses . 7
9 Protection against the spread of fire . 8
10 Equipment temperature limits and resistance to heat . 8
11 Protection against HAZARDS from fluids and solid foreign objects . 8
12 Protection against radiation, including laser sources, and against sonic and
ultrasonic pressure . 8
13 Protection against liberated gases and substances, explosion and implosion . 8
14 Components and subassemblies . 8
15 Protection by interlocks . 8
16 HAZARDS resulting from application . 9
17 RISK assessment . 9
Annexes . 9
Bibliography . 10

---------------------- Page: 6 ----------------------
SIST EN IEC 61010-2-051:2021
IEC 61010-2-051:2018 © IEC 2018 – 3 –
INTERNATIONAL ELECTROTECHNICAL COMMISSION
____________

SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT FOR
MEASUREMENT, CONTROL, AND LABORATORY USE –

Part 2-051: Particular requirements for laboratory
equipment for mixing and stirring

FOREWORD
1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
international co-operation on all questions concerning standardization in the electrical and electronic fields. To
this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
in the subject dealt with may participate in this preparatory work. International, governmental and non-
governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
with the International Organization for Standardization (ISO) in accordance with conditions determined by
agreement between the two organizations.
2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
consensus of opinion on the relevant subjects since each technical committee has representation from all
interested IEC National Committees.
3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
misinterpretation by any end user.
4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
transparently to the maximum extent possible in their national and regional publications. Any divergence
between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
the latter.
5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
services carried out by independent certification bodies.
6) All users should ensure that they have the latest edition of this publication.
7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
members of its technical committees and IEC National Committees for any personal injury, property damage or
other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
expenses arising out
...

SLOVENSKI STANDARD
oSIST prEN 61010-2-051:2018
01-februar-2018
9DUQRVWQH]DKWHYH]DHOHNWULþQRRSUHPR]DPHULWYHQDG]RULQODERUDWRULMVNR
XSRUDERGHO3RVHEQH]DKWHYH]DODERUDWRULMVNRRSUHPR]DPHãDQMHLQ
SUHPHãDYDQMH
Safety requirements for electrical equipment for measurement, control and laboratory
use - Part 2-051: Particular requirements for laboratory equipment for mixing and stirring
Sicherheitsbestimmungen für elektrische Mess-, Steuer-, Regel- und Laborgeräte - Teil 2
-051: Besondere Anforderungen an Laborgeräte zum Mischen und Rühren
Règles de sécurité pour appareils électriques de mesurage, de régulation et de
laboratoire - Partie 2-051: Exigences particulières pour appareils de laboratoire utilisés
pour mixer et agiter
Ta slovenski standard je istoveten z: prEN 61010-2-051:2017
ICS:
19.080 (OHNWULþQRLQHOHNWURQVNR Electrical and electronic
SUHVNXãDQMH testing
71.040.20 Laboratorijska posoda in Laboratory ware and related
aparati apparatus
oSIST prEN 61010-2-051:2018 en,fr,de
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
oSIST prEN 61010-2-051:2018

---------------------- Page: 2 ----------------------
oSIST prEN 61010-2-051:2018
66/642/CDV

COMMITTEE DRAFT FOR VOTE (CDV)
PROJECT NUMBER:
IEC 61010-2-051 ED4
DATE OF CIRCULATION: CLOSING DATE FOR VOTING:
2017-12-01 2018-02-23
SUPERSEDES DOCUMENTS:
66/627A/RR

IEC TC 66 : SAFETY OF MEASURING, CONTROL AND LABORATORY EQUIPMENT
SECRETARIAT: SECRETARY:
United Kingdom Mr David Hyde
OF INTEREST TO THE FOLLOWING COMMITTEES: PROPOSED HORIZONTAL STANDARD:


Other TC/SCs are requested to indicate their interest, if any,
in this CDV to the secretary.
FUNCTIONS CONCERNED:

EMC ENVIRONMENT QUALITY ASSURANCE SAFETY
SUBMITTED FOR CENELEC PARALLEL VOTING NOT SUBMITTED FOR CENELEC PARALLEL VOTING
Attention IEC-CENELEC parallel voting
The attention of IEC National Committees, members of
CENELEC, is drawn to the fact that this Committee Draft for
Vote (CDV) is submitted for parallel voting.
The CENELEC members are invited to vote through the
CENELEC online voting system.

This document is still under study and subject to change. It should not be used for reference purposes.
Recipients of this document are invited to submit, with their comments, notification of any relevant patent rights of which they
are aware and to provide supporting documentation.

TITLE:
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-051:
Particular requirements for laboratory equipment for mixing and stirring

NOTE FROM TC/SC OFFICERS:
This CDV is intended only to align IEC 61010-2-051:2015 with IEC 61010-1:2010 and its amendment 1:2016. A
revision this soon is justified by the large number of significant changes introduced by this amendment 1. With
this revision IEC 61010-2-051 will be in line with the latest requirements of IEC 61010-1 + A1.
This document contains no technical changes to already accepted base documents (IEC 61010-1:2010 and its
amendment 1:2016 and IEC 61010-2-051:2015) but one; Clause 6.8.3.1 is modified because otherwise it would
need a specific European deviation in order to be harmonised to the LVD 2014/35/EU (ref. NAC assessment of
Copyright © 2017 International Electrotechnical Commission, IEC. All rights reserved. It is permitted to download this
electronic file, to make a copy and to print out the content for the sole purpose of preparing National Committee positions.
You may not copy or "mirror" the file or printed version of the document, or any part of it, for any other purpose without
permission in writing from IEC.

---------------------- Page: 3 ----------------------
oSIST prEN 61010-2-051:2018
61010-2-051/Ed.4/CDV © IEC(E) 2 66/642/CDV

IEC 61010-1/A1). Further technical development is reserved for a new amendment or edition to be initiated
separately as necessary.
This alignment is realised as a new 4th edition of IEC 61010-2-051 simply because of document control; the
previous edition 3.0 is based on the third edition of IEC 61010-1:2010 (without the Amendment 1:2016) and
amending it to incorporate the contents of IEC 61010-1 Amendment 1 would need an unnecessary repeating of
the requirements in that amendment 1 that are not particular for the equipment in the scope of IEC 61010-2-051.
Furthermore, technically, one would need to follow 4 documents in parallel to get the full text of this part 2
(61010-1:2010, 61010-1 A1:2016, 61010-2-051:2015, and 61010-2-051 A1).With this approach, and when the
consolidated version of IEC 61010-1:2010/A1:2016 conveniently is published, only two documents are needed.

---------------------- Page: 4 ----------------------
oSIST prEN 61010-2-051:2018
61010-2-051/Ed.4/CDV ©IEC(E) 2 66/642/CDV

1 CONTENTS
2 FOREWORD . 3
3 1 Scope and object . 5
4 2 Normative references. 5
5 3 Terms and definitions . 5
6 4 Tests . 5
7 5 Marking and documentation . 6
8 6 Protection against electric shock . 6
9 7 Protection against mechanical HAZARDS . 6
10 8 Resistance to mechanical stresses . 7
11 9 Protection against the spread of fire . 7
12 10 Equipment temperature limits and resistance to heat . 7
13 11 Protection against HAZARDS from fluids . 8
14 12 Protection against radiation, including laser sources, and against sonic and
15 ultrasonic pressure . 8
16 13 Protection against liberated gases and substances, explosion and implosion . 8
17 14 Components and subassemblies . 8
18 15 Protection by interlocks . 8
19 16 HAZARDS resulting from application . 8
20 17 RISK Assessment . 8
21 Annexes . 10
22 Bibliography . 10
23
24

---------------------- Page: 5 ----------------------
oSIST prEN 61010-2-051:2018
61010-2-051/Ed.4/CDV ©IEC(E) 3 66/642/CDV

25 INTERNATIONAL ELECTROTECHNICAL COMMISSION
26 ____________
27
28 SAFETY REQUIREMENTS FOR ELECTRICAL EQUIPMENT
29 FOR MEASUREMENT, CONTROL, AND LABORATORY USE –
30
31 Part 2-051: Particular requirements for laboratory
32 equipment for mixing and stirring
33
34 FOREWORD
35 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
36 all national electrotechnical committees (IEC National Committees). The object of IEC is to promote
37 international co-operation on all questions concerning standardization in the electrical and electronic fields. To
38 this end and in addition to other activities, IEC publishes International Standards, Technical Specifications,
39 Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC
40 Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested
41 in the subject dealt with may participate in this preparatory work. International, governmental and non-
42 governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely
43 with the International Organization for Standardization (ISO) in accordance with conditions determined by
44 agreement between the two organizations.
45 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international
46 consensus of opinion on the relevant subjects since each technical committee has representation from all
47 interested IEC National Committees.
48 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National
49 Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC
50 Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any
51 misinterpretation by any end user.
52 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
53 transparently to the maximum extent possible in their national and regional publications. Any divergence
54 between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in
55 the latter.
56 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
57 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any
58 services carried out by independent certification bodies.
59 6) All users should ensure that they have the latest edition of this publication.
60 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and
61 members of its technical committees and IEC National Committees for any personal injury, property damage or
62 other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and
63 expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC
64 Publications.
65 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is
66 indispensable for the correct application of this publication.
67 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of
68 patent rights. IEC shall not be held responsible for identifying any or all such patent rights.
69 International Standard IEC 61010-2-051 has been prepared by IEC technical committee 66:
70 Safety of measuring, control and laboratory equipment.
71 It has the status of a group safety publication in accordance with IEC Guide 104.
72 This third fourth edition cancels and replaces the second third edition published in 201503. It
73 constitutes a technical revision and includes the following changes from the second third
74 edition:
75 • adaptation of changes introduced by Amendment 1 of IEC 61010-1;
76 • added tolerance for stability of a.c. voltage test equipment to Clause 6;
77 • added required risk assessment for equipment intended to be used with flammable,
78 hazardous, or toxic fluids to Clause 17;
79 • editorial changes.
80 The text of this standard is based on the following documents:

---------------------- Page: 6 ----------------------
oSIST prEN 61010-2-051:2018
61010-2-051/Ed.4/CDV ©IEC(E) 4 66/642/CDV

FDIS Report on voting
66/xxx/FDIS 66/xxx/RVD
81
82 Full information on the voting for the approval of this standard can be found in the report on
83 voting indicated in the above table.
84 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.
85 A list of all parts of the
...