Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz - Part 1: General conditions and definitions

This part of IEC 62132 provides general information and definitions on measurement of conducted and radiated electromagnetic immunity of integrated circuits (ICs) to conducted and radiated disturbances. It also provides a description of measurement conditions, test equipment and set-up, as well as the test procedures and content of the test reports. A test method comparison table is included in Annex A to assist in selecting the appropriate measurement method(s). This standard describes general conditions required to obtain a quantitative measure of immunity of ICs in a uniform testing environment. Critical parameters that are expected to influence the test results are described. Deviations from this standard are noted explicitly in the individual test report. The measurement results can be used for comparison or other purposes. Measurement of the injected voltages and currents, together with the responses of the ICs tested at controlled conditions, yields information about the potential immunity of the IC to conducted and radiated RF disturbances in a given application.

Integrierte Schaltungen - Messung der elektromagnetischen Störfestigkeit im Frequenzbereich von 150 kHz bis 1 GHz - Teil 1: Allgemeine Bedingungen und Begriffe

Circuits intégrés - Mesure de l'immunité électromagnétique, 150 kHz à 1 GHz - Partie 1: Conditions générales et définitions

Cette partie de la CEI 62132 fournit des informations générales et des définitions sur la mesure de l'immunité électromagnétique conduite et rayonnée des circuits intégrés (CI) aux perturbations conduites et rayonnées. Elle fournit également une description des conditions de mesure, de l'équipement d'essai et du montage d'essai ainsi que les méthodes d'essai et le contenu des rapports d'essai. Un tableau de comparaison des méthodes d'essai est compris dans l'Annexe A pour aider à la sélection de la ou des méthodes de mesure appropriées. L'objet de cette norme est de décrire les conditions générales prescrites pour obtenir une mesure quantitative d'immunité des CI dans un environnement d'essais uniforme. Les paramètres critiques qui sont prévus pour influencer les résultats d'essai sont décrits. Les divergences par rapport à la présente norme sont notées explicitement dans le rapport d'essai individuel. Les résultats de mesure peuvent être utilisés en vue de comparaisons ou à d'autres fins. La mesure des tensions et courants injectés, ainsi que les réponses des CI essayés aux conditions contrôlées, fournissent des informations sur l'immunité potentielle du CI aux perturbations RF conduites et rayonnées dans une application donnée.

Integrirana vezja – Meritve elektromagnetne odpornosti od 150 kHz do 1 GHz – 1. del: Splošni pogoji in definicije (IEC 62132-1:2006)

General Information

Status
Withdrawn
Publication Date
09-Feb-2006
Withdrawal Date
31-Jan-2009
Drafting Committee
Parallel Committee
Current Stage
9960 - Withdrawal effective - Withdrawal
Start Date
03-Dec-2018
Completion Date
03-Dec-2018

Relations

Buy Standard

Standard
EN 62132-1:2006
English language
25 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI SIST EN 62132-1:2006

STANDARD
julij 2006
Integrirana vezja – Meritve elektromagnetne odpornosti od 150 kHz do 1 GHz –
1. del: Splošni pogoji in definicije (IEC 62132-1:2006)
Integrated circuits - Measurement of electromagnetic immunity, 150 kHz to 1 GHz -
Part 1: General conditions and definitions (IEC 62132-1:2006)
ICS 31.200; 33.100.20 Referenčna številka
SIST EN 62132-1:2006(en)
©  Standard je založil in izdal Slovenski inštitut za standardizacijo. Razmnoževanje ali kopiranje celote ali delov tega dokumenta ni dovoljeno

---------------------- Page: 1 ----------------------

EUROPEAN STANDARD
EN 62132-1

NORME EUROPÉENNE
February 2006
EUROPÄISCHE NORM

ICS 31.200


English version


Integrated circuits -
Measurement of electromagnetic immunity, 150 kHz to 1 GHz
Part 1: General conditions and definitions
(IEC 62132-1:2006)


Circuits intégrés -  Integrierte Schaltungen -
Mesure de l'immunité électromagnétique, Messung der elektromagnetischen
150 kHz à 1 GHz Störfestigkeit im Frequenzbereich
Partie 1: Conditions générales von 150 kHz bis 1 GHz
et définitions Teil 1: Allgemeine Bedingungen
(CEI 62132-1:2006) und Begriffe
(IEC 62132-1:2006)




This European Standard was approved by CENELEC on 2006-02-01. CENELEC members are bound to comply
with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on
application to the Central Secretariat or to any CENELEC member.

This European Standard exists in three official versions (English, French, German). A version in any other
language made by translation under the responsibility of a CENELEC member into its own language and notified
to the Central Secretariat has the same status as the official versions.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania,
Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland
and United Kingdom.

CENELEC
European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung

Central Secretariat: rue de Stassart 35, B - 1050 Brussels


© 2006 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 62132-1:2006 E

---------------------- Page: 2 ----------------------

EN 62132-1:2006 - 2 -
Foreword
The text of document 47A/734/FDIS, future edition 1 of IEC 62132-1, prepared by SC 47A, Integrated
circuits, of IEC TC 47, Semiconductor devices, was submitted to the IEC-CENELEC parallel vote and was
approved by CENELEC as EN 62132-1 on 2006-02-01.
The following dates were fixed:
– latest date by which the EN has to be implemented
at national level by publication of an identical
national standard or by endorsement (dop) 2006-11-01
– latest date by which the national standards conflicting
with the EN have to be withdrawn (dow) 2009-02-01
This European Standard makes reference to International Standards. Where the International Standard
referred to has been endorsed as a European Standard or a home-grown European Standard exists, this
European Standard shall be applied instead. Pertinent information can be found on the CENELEC web
site.
__________
Endorsement notice
The text of the International Standard IEC 62132-1:2006 was approved by CENELEC as a European
Standard without any modification.
__________

---------------------- Page: 3 ----------------------

NORME CEI
INTERNATIONALE
IEC



62132-1
INTERNATIONAL


Première édition
STANDARD

First edition

2006-01


Circuits intégrés –
Mesure de l'immunité électromagnétique,
150 kHz à 1 GHz –
Partie 1:
Conditions générales et définitions

Integrated circuits –
Measurement of electromagnetic
immunity, 150 kHz to 1 GHz –
Part 1:
General conditions and definitions

 IEC 2006 Droits de reproduction réservés  Copyright - all rights reserved
Aucune partie de cette publication ne peut être reproduite ni No part of this publication may be reproduced or utilized in any
utilisée sous quelque forme que ce soit et par aucun procédé, form or by any means, electronic or mechanical, including
électronique ou mécanique, y compris la photocopie et les photocopying and microfilm, without permission in writing from
microfilms, sans l'accord écrit de l'éditeur. the publisher.
International Electrotechnical Commission, 3, rue de Varembé, PO Box 131, CH-1211 Geneva 20, Switzerland
Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmail@iec.ch Web: www.iec.ch
CODE PRIX
S
PRICE CODE
Commis
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.