iTeh StandardsiTeh Standards
EURUSD
Your shopping cart is empty.
CLC

CLC IEC/TS 61980-3:2020

(Main)

Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems

Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems

This part of IEC 61980 series, (in a first step as Technical Specification for three-year period) applies to the equipment for the magnetic field-wireless power transfer (MF-WPT) of electric power from the supply network to electric road vehicles for purposes of supplying electric energy to the RESS (Rechargeable energy storage system) and/or other on-board electrical systems in an operational state when connected to the supply network, at standard supply voltages ratings per IEC 60038 up to 1000V a.c. and up to 1500 V d.c.This standard also applies to MF-WPT equipment supplied from on-site storage systems (e.g. buffer batteries etc.) at standard supply voltages ratings per IEC 60038 up to 1000V a.c. and up to 1500 V d.c.

Kontaktlose Energieübertragungssysteme (WPT) für Elektrofahrzeuge - Teil 3: Spezifische Anforderungen für die kontaktlosen Energieübertragungssysteme mit Magnetfeld

Systèmes de transfert de puissance sans fil (WPT) pour véhicules électriques - Partie 3 : Exigences spécifiques relatives aux systèmes de transfert de puissance sans fil en présence de champs magnétiques

Brezžični sistemi za prenos električne energije za električna vozila (WPT) - 3. del: Posebne zahteve za sistem brezžičnega prenosa energije z magnetnim poljem

General Information

Status
Published
Publication Date
04-Jun-2020
ICS
43.120 - Electric road vehicles
Technical Committee
CLC/TC 69X - Electrical systems for electric road vehicles
Drafting Committee
IEC/TC 69 - IEC_TC_69
Current Stage
6060 - Document made available - Publishing
Start Date
05-Jun-2020
Completion Date
05-Jun-2020
Ref Project
SIST-TS CLC IEC/TS 61980-3:2020 - Electric vehicle wireless power transfer (wpt) systems - Part 3: Specific requirements for the magnetic field wireless power transfer systems

Relations

Replaced By
EN IEC 61980-3:2022 - Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for magnetic field wireless power transfer systems
Effective Date
27-Dec-2022

Buy Standard

TS CLC IEC/TS 61980-3:2020 - BARVETS CLC IEC/TS 61980-3:2020 - BARVE
PreviousNext
Technical specification
TS CLC IEC/TS 61980-3:2020 - BARVE
English language
111 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

SLOVENSKI STANDARD
SIST-TS CLC IEC/TS 61980-3:2020
01-september-2020
Brezžični sistemi za prenos električne energije za električna vozila (WPT) - 3. del:
Posebne zahteve za sistem brezžičnega prenosa energije z magnetnim poljem
Electric vehicle wireless power transfer (wpt) systems - Part 3: Specific requirements for
the magnetic field wireless power transfer systems
Kontaktlose Energieübertragungssysteme (WPT) für Elektrofahrzeuge - Teil 3:
Spezifische Anforderungen für die kontaktlosen Energieübertragungssysteme mit
Magnetfeld
Systèmes de transport d'énergie sans fil pour véhicules électriques - Partie 3 : Exigences
spécifiques relatives aux systèmes de transport d'énergie sans fil à base de champs
magnétiques
Ta slovenski standard je istoveten z: CLC IEC/TS 61980-3:2020
ICS:
43.120 Električna cestna vozila Electric road vehicles
SIST-TS CLC IEC/TS 61980-3:2020 en
2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.

---------------------- Page: 1 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020

---------------------- Page: 2 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020


TECHNICAL SPECIFICATION CLC IEC/TS 61980-3

SPÉCIFICATION TECHNIQUE

TECHNISCHE SPEZIFIKATION
June 2020
ICS 43.120

English Version
Electric vehicle wireless power transfer (WPT) systems - Part 3:
Specific requirements for the magnetic field wireless power
transfer systems
(IEC/TS 61980-3:2019)
Systèmes de transfert de puissance sans fil (WPT) pour Kontaktlose Energieübertragungssysteme (WPT) für
véhicules électriques - Partie 3 : Exigences spécifiques Elektrofahrzeuge - Teil 3: Spezifische Anforderungen für die
relatives aux systèmes de transfert de puissance sans fil en kontaktlosen Energieübertragungssysteme mit Magnetfeld
présence de champs magnétiques (IEC/TS 61980-3:2019)
(IEC/TS 61980-3:2019)
This Technical Specification was approved by CENELEC on 2020-05-25.

CENELEC members are required to announce the existence of this TS in the same way as for an EN and to make the TS available promptly
at national level in an appropriate form. It is permissible to keep conflicting national standards in force.

CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,
Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland,
Turkey and the United Kingdom.


European Committee for Electrotechnical Standardization
Comité Européen de Normalisation Electrotechnique
Europäisches Komitee für Elektrotechnische Normung
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.
 Ref. No. CLC IEC/TS 61980-3:2020 E

---------------------- Page: 3 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
CLC IEC /TS 61980-3:2020 (E)
European foreword
This document (CLC IEC/TS 61980-3:2020) consists of the text of IEC/TS 61980-3:2019
prepared by IEC/TC 69 "Electric road vehicles and electric industrial trucks".
Attention is drawn to the possibility that some of the elements of this document may be the
subject of patent rights. CENELEC shall not be held responsible for identifying any or all
such patent rights.
Endorsement notice
The text of the International Technical Specification IEC/TS 61980-3:2019 was approved by
CENELEC as a European Technical Specification without any modification.
In the official version, for Bibliography, the following notes have to be added for the standards
indicated:
IEC 60038 NOTE Harmonized as EN 60038
CISPR 11 NOTE Harmonized as EN 55011


2

---------------------- Page: 4 ----------------------
SIST-TS CLC IEC/TS 61980-3:2020
CLC IEC /TS 61980-3:2020 (E)

Annex ZA
(normative)
Normative references to international publications
with their corresponding European publications
The following documents are referred to in the text in such a way that some or all of their
content constitutes requirements of this document. For dated references, only the edition
cited applies. For undated references, the latest edition of the referenced document
(including any amendments) applies.
NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant

EN/HD applies.

NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here:
www.cenelec.eu.

Publication Year Title EN/HD Year
IEC 60529 -  Degrees of protection provided by EN 60529 -
enclosures (IP Code)
IEC 60947-2 -  Low-voltage switchgear and controlgear EN 60947-2 -
- Part 2: Circuit-breakers
IEC 61008-1 -  Res
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.

This May Also Interest You

CLC
CLC IEC/TS 61851-3-5:2023(Main)
Electric vehicles conductive charging system - Part 3-5: DC EV supply equipment where protection relies on double or reinforced insulation - Pre-defined communication parameters and general application objects
SIST-TS CLC IEC/TS 61851-3-5:2024

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC61851-3, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle or a removable RESS or traction-battery of a light electric road vehicle, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c.. Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. Such energy control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc. This part of IEC 61851-3 series provides specifications with regard to the pre-defined communication parameters and general application objects.

  • Technical specification
    176 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC IEC/TS 61851-3-2:2023(Main)
Electric vehicle conductive charging system - Part 3-2: DC EV supply equipment where protection relies on double or reinforced insulation - Particular requirements for portable and mobile equipment
SIST-TS CLC IEC/TS 61851-3-2:2024

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC61851-3, applies to the d.c. power supply equipment (e.g. VCU) for the conductive transfer of electric power between the supply network and an light electric road vehicle when connected to the supply network , with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c. The supply systems described in the IEC 61851-3 series are primarily intended for the use by EVs of category L hereinafter referred to as light electric vehicles (light EVs). NOTE 1 Light EV includes all electrically propelled two and three wheeled vehicles of Category L1 up to Category L7 according to the definition of ECE-TRANS-WP29-78r2e and all electrically propelled or assisted cycles. The electrical protection of the complete light EV supply system from the connection to the supply network up to the light EV or removed RESS complies with protective separation and with galvanic separation between a.c. input and d.c. output or class III.

  • Technical specification
    38 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC IEC/TS 61851-3-1:2023(Main)
Electric vehicles conductive charging system - Part 3-1: DC EV supply equipment where protection relies on double or reinforced insulation - General rules and requirements for stationary equipment
SIST-TS CLC IEC/TS 61851-3-1:2024

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC 61851, applies to the equipment for the conductive transfer of electric power between the supply network and an electric road vehicle when connected to the supply network, supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated output voltage up to 480 V a.c. or up to 200 V d.c..The supply systems described in the IEC 61851-3 series are primarily intended for the use by electric road vehicles of category L hereinafter referred to as light electric vehicles (light Evs). NOTE 1 Light EV includes all electrically propelled two and three wheeled vehicles of Category L1 up to Category L7 according to the definition of ECE-TRANS-WP29-78r2e and all electrically propelled or assisted cycles.Light electric road vehicles (light EVs) imply all road vehicles, including plug-in hybrid road vehicles (PHEV), that derive all or part of their energy from on-board rechargeable energy storage systems, (RESS), including traction batteries.The electrical protection of the complete light EV supply system from the connection to the supply network up to the light EV or removed RESS complies with protective separation between mains and d.c. and with galvanic separation between mains and d.c. or class III.Supplementary requirements for output voltages over 60 V d.c. are given in this document.Supplementary requirements for Class III equipment with output voltages over 15 V d.c. and over 6 V a.c. are given in this document.Requirements for bidirectional energy transfer d.c. to a.c. are under consideration and are not part of this edition. NOTE 2 This standard is not mandatory for proprietary EV supply system configurations Type B or D according to IEC 61851-3 series provided they have equivalent or higher safety levels.

  • Technical specification
    57 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC IEC/TS 61851-3-7:2023(Main)
Electric vehicles conductive charging system - Part 3-7: DC EV supply equipment where protection relies on double or reinforced insulation - Battery system communication
SIST-TS CLC IEC/TS 61851-3-7:2024

This part of IEC 61851-3 series as a technical specification together with part 3-1 and with part 1 of IEC61851, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle to a removable RESS or traction-battery of a light EV when connected to the supply network, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c.. Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. Such energy control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc. This part of IEC 61851-3 series specifies application objects provided by the battery system.

  • Technical specification
    109 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC IEC/TS 61851-3-6:2023(Main)
Electric vehicles conductive charging system - Part 3-6: DC EV supply equipment where protection relies on double or reinforced insulation - Voltage converter unit communication
SIST-TS CLC IEC/TS 61851-3-6:2024

This part of IEC 61851-3 series as a technical specification together with part 3-1 and with part 1 of IEC61851, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle to a removable RESS or traction-battery of a light EV when connected to the supply network, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c.. Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. Such energy control applications may be implemented in e.g. light electric vehicles, robots, offshore parks, isolated farms, etc. This part of IEC 61851-3 series provides application objects provided by the AC-DC voltage converter unit or DC/DC voltage converter unit

  • Technical specification
    165 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
CLC IEC/TS 61851-3-4:2023(Main)
Electric vehicles conductive charging system - Part 3-4: DC EV supply equipment where protection relies on double or reinforced insulation - General definitions and requirements for CANopen communication
SIST-TS CLC IEC/TS 61851-3-4:2024

This part of IEC 61851-3 series (in a first step as Technical Specification for three-year period) together with part 1 of IEC 61851-3, applies to communication for the conductive transfer of electric power between the supply network and a light electric road vehicle or a removable RESS or traction-battery of a light electric road vehicle, with a rated supply voltage up to 480 V a.c. or up to 400 V d.c. and a rated ìoutputî voltage up to 480 V a.c. or up to 200 V d.c.. Energy management system for control of power transfer between battery systems and voltage converter units specifies the communication for all devices that may take part in energy management control. The basic application profile for energy management systems consists of the following parts: Part 3-4: General definitions for communication; Part 3-5: Pre-defined communication parameters and general application objects; Part 3-6: Voltage converter unit communication; Part 3-7: Battery system communication.

  • Technical specification
    106 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61851-1:2019/AC:2023-12(Corrigendum)
Electric vehicle conductive charging system - Part 1: General requirements
SIST EN IEC 61851-1:2019/AC:2024
  • Corrigendum
    5 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61980-2:2023(Main)
Electric vehicle wireless power transfer (WPT) systems - Part 2: Specific requirements for MF-WPT system communication and activities
SIST EN IEC 61980-2:2023

This Part of IEC 61980 addresses communication and activities of magnetic field wireless power transfer (MF-WPT) systems. The requirements in this document are intended to be applied for MF-WPT systems accordin to IEC 61980-3 and ISO 19363. The aspects covered in this document include: - operational and functional characteristics of the MF-WPT communication system and related activities - operational and functional characteristics of the positioning system The following aspects are under consideration for future documents: - requirements for two- and three-wheel vehicles, - requirements for MF-WPT systems supplying power to EVs in motion, and - requirements for bidirectional power transfer Note: Any internal communication at Supply device or EV device is not in the scope of this document

  • Standard
    97 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 61980-3:2022(Main)
Electric vehicle wireless power transfer (WPT) systems - Part 3: Specific requirements for magnetic field wireless power transfer systems
SIST EN IEC 61980-3:2023

This part of IEC 61980 applies to the off-board supply equipment for wireless power transfer via magnetic field (MF-WPT) to electric road vehicles for purposes of supplying electric energy to the RESS (rechargeable energy storage system) and/or other on-board electrical systems. The MF-WPT system operates at standard supply voltage ratings per IEC 60038 up to 1 000 V AC and up to 1 500 V DC from the supply network. The power transfer takes place while the electric vehicle (EV) is stationary. Off-board supply equipment fulfilling the requirements in this document are intended to operate with EV devices fulfilling the requirements described in ISO 19363. The aspects covered in this document include - the characteristics and operating conditions, - the required level of electrical safety, - requirements for basic communication for safety and process matters if required by a MF111 WPT system, - requirements for positioning to assure efficient and safe MF-WPT power transfer, and - specific EMC requirements for MF-WPT systems. The following aspects are under consideration for future documents: - requirements for MF-WPT systems for two- and three-wheel vehicles, - requirements for MF-WPT systems supplying power to EVs in motion, and - requirements for bidirectional power transfer. - requirements for flush mounted primary devices - requirements for MF-WPT systems for heavy duty vehicles - requirements for MF-WPT systems with inputs greater than 11,1 kVA This standard does not apply to - safety aspects related to maintenance, and - trolley buses, rail vehicles and vehicles designed primarily for use off-road. NOTE The terms used in this document are specifically for MF-WPT.

  • Standard
    121 pages
    English language
    sale 10% off
    e-Library read for
    1 day
CLC
EN IEC 63119-2:2022(Main)
Information exchange for electric vehicle charging roaming service - Part 2: Use cases
SIST EN IEC 63119-2:2023

The Standard specifies roaming use cases of information exchange between EV Charge Service Providers (CSP), Charging Station Operators (CSOs) and Clearing House platforms through roaming endpoints. The elementary use cases defined in this document of IEC 63119-2 are designed to support the user to have access to the EV supply equipment which doesn’t belong to the Home-CSP. IEC 63119 series are applicable to high-level communication involved in information exchange/interaction between different CSPs, as well as between a CSP and CSO with or without Clearing House platform through the roaming endpoint. IEC 63119 series do not specify the communication either between Charging Station (CS) and Charging Station Operator (CSO) or between EV and CS.

  • Standard
    60 pages
    English language
    sale 10% off
    e-Library read for
    1 day