General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up

This product family standard sets the minimum level of EMC performance for HBES/BACS products intended to be connected to an HBES/BACS system. A set of devices connected to perform a stand alone application is not considered to be an HBES/BACS system and therefore are outside the scope of this European Standard. This European Standard provides the general performance requirements and test setups for EMC for all products connected to HBES/BACS. This connection can be wired (e.g. communication cable, power line) or wireless (e.g. radiofrequency, infrared). This European Standard is applicable (but not limited) to – operator stations and other human system interface devices, – devices for management functions, – control devices, automation stations and application specific controllers, – field devices and their interfaces, – cabling and interconnection of devices, – dedicated devices for engineering and commissioning tools for HBES/BACS

Allgemeine Anforderungen an die Elektrische Systemtechnik für Heim und Gebäude (ESHG) und an Systeme der Gebäudeautomation (GA) - Teil 5-1: EMV-Anforderungen, Bedingungen und Prüfungen

Diese Produktfamiliennorm legt das Mindestniveau der EMV-Qualität von ESHG/GA-Betriebsmitteln, die an ein ESHG/GA-System angeschlossen werden, fest. Eine Gerätegruppe, die für eine eigenständige Anwendung miteinander verbunden ist, wird nicht als ESHG/GA-System angesehen und liegt daher außerhalb des Anwendungsbereiches dieser Europäischen Norm. Diese Europäische Norm legt für alle an ein ESHG/GA angeschlossenen Betriebsmittel (en: products) die allgemeinen Bewertungskriterien und Prüfaufbauten für EMV fest. Diese Verbindung kann über Leitungen (z. B. Kommunikationsleitung, Übertragung auf dem elektrischen Niederspannungsnetz) oder drahtlos (z. B. über Funk, Infrarot) erfolgen. Diese Europäische Norm gilt für folgende Anwendungen (ist aber nicht auf diese beschränkt): – Bedienstationen und andere Geräte mit einer Mensch-System-Schnittstelle; – Geräte mit Managementfunktionen; – Steuereinrichtungen, Automatisierungsstationen und anwendungsspezifische Steuer- und Regel-einheiten; – Feldgeräte und ihre Schnittstellen; – Verkabelung und Geräteverbindungen; – technische Arbeitsmittel und Arbeitsmittel für die Inbetriebnahme für ESHG/GA.

Exigences générales relatives aux systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) et aux Systèmes de Gestion Technique du Bâtiment (SGTB) - Partie 5-1: CEM Exigences générales, condition et montage d’essais

Splošne zahteve za stanovanjske in stavbne elektronske sisteme (HBES) in sisteme za avtomatizacijo in krmiljenje stavb (BACS) - 5-1. del: Zahteve, pogoji in priprava preskusov EMC

Ta standard o družini izdelkov vzpostavlja minimalno raven EMC zmogljivosti za izdelke HBES/BACS, namenjene za povezavo s HBES/BACS sistemom. Niz naprav, povezanih za izvedbo samostoječe uporabe, se ne šteje za HBES/BACS sistem in je potemtakem zunaj področja uporabe tega evropskega standarda. Ta evropski standard zagotavlja splošne zahteve za zmogljivost in preskusne postavitve za EMC za vse izdelke, povezane z HBES/BACS. Ta povezava je lahko žična (npr. komunikacijski kabel, električni vod) ali brezžična (npr. radiofrekvečna, infrardeča). Ta evropski standard velja (vendar ni omejen) za – mesta operaterja in druge vmesniške naprave človeškega sistema, - naprave za funkcije vodenja, - nadzorne naprave, mesta za avtomatizacijo in uvajanje posebnih krmilnikov; - naprave na terenu in njihove vmesnike, - okabljenje in medsebojno povezovanje naprav; - namenske naprave za inženirska in vzpostavitvena orodja za HBES/BACS.

General Information

Status
Published
Publication Date
22-Apr-2010
Withdrawal Date
31-Mar-2013
Current Stage
6060 - Document made available - Publishing
Start Date
23-Apr-2010
Completion Date
23-Apr-2010

Relations

Buy Standard

Standard
EN 50491-5-1:2011
English language
17 pages
sale 10% off
Preview
sale 10% off
Preview
e-Library read for
1 day

Standards Content (Sample)

2003-01.Slovenski inštitut za standardizacijo. Razmnoževanje celote ali delov tega standarda ni dovoljeno.Splošne zahteve za stanovanjske in stavbne elektronske sisteme (HBES) in sisteme za avtomatizacijo in krmiljenje stavb (BACS) - 5-1. del: Zahteve, pogoji in priprava preskusov EMCAllgemeine Anforderungen an die Elektrische Systemtechnik für Heim und Gebäude (ESHG) und an Systeme der Gebäudeautomation (GA) - Teil 5-1: EMV-Anforderungen, Bedingungen und PrüfungenExigences générales relatives aux systèmes électroniques pour les foyers domestiques et les bâtiments (HBES) et aux Systèmes de Gestion Technique du Bâtiment (SGTB) - Partie 5-1: CEM Exigences générales, condition et montage d’essaisGeneral requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 5-1: EMC requirements, conditions and test set-up97.120Avtomatske krmilne naprave za domAutomatic controls for household useICS:Ta slovenski standard je istoveten z:EN 50491-5-1:2010SIST EN 50491-5-1:2011en,de01-januar-2011SIST EN 50491-5-1:2011SLOVENSKI
STANDARDSIST EN 50090-2-2:1998/A2:2007SIST EN 50090-2-2:1998/A1:2003SIST EN 50090-2-2:19981DGRPHãþD



SIST EN 50491-5-1:2011



EUROPEAN STANDARD EN 50491-5-1 NORME EUROPÉENNE
EUROPÄISCHE NORM April 2010
CENELEC European Committee for Electrotechnical Standardization Comité Européen de Normalisation Electrotechnique Europäisches Komitee für Elektrotechnische Normung
Management Centre: Avenue Marnix 17, B - 1000 Brussels
© 2010 CENELEC -
All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
Ref. No. EN 50491-5-1:2010 E
ICS 97.120 Supersedes EN 50090-2-2:1996 (partially) + corr. Mar.1997 (partially) + A1:2002 (partially) + A2:2007 (partially)
English version
General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -
Part 5-1: EMC requirements, conditions and test set-up
Exigences générales relatives
aux systèmes électroniques pour
les foyers domestiques et les bâtiments (HBES) et aux Systèmes de Gestion Technique du Bâtiment (SGTB) -
Partie 5-1: CEM Exigences générales, condition et montage d’essais
Allgemeine Anforderungen
an die Elektrische Systemtechnik für Heim und Gebäude (ESHG) und an Systeme der Gebäudeautomation (GA) -
Teil 5-1: EMV-Anforderungen, Bedingungen und Prüfungen
This European Standard was approved by CENELEC on 2010-04-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.
This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.
CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom.
SIST EN 50491-5-1:2011



EN 50491-5-1:2010 – 2 – Foreword This European Standard was prepared by a joint working group of CLC/TC 205, Home and Building Electronic Systems (HBES) and CEN/TC 247, Building Automation, Controls and Building Management (BACS). It was submitted to the formal vote and was accepted by CENELEC as EN 50491-5-1 on 2010-04-01. This document supersedes the relevant parts of EN 50090-2-2:1996 1); it is referenced by CEN/TC 247 and CLC/TC 205. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates are proposed: – latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
(dop)
2011-04-01 – latest date by which the national standards conflicting with the EN have to be withdrawn
(dow)
2013-04-01 As a result of the discussions at the CLC/TC 205 meeting on 2004-10-5/6 concerning the structuring of their standards in general parts and open system parts (see CLC/TC 205/Sec0413/INF) the following new parts of EN 50491 under the generic title “General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS)“ under the task of the JWG CEN/TC 247–CLC/TC 205 are proposed: Part 2 Environmental conditions; Part 3 Electrical safety requirements; Part 4-1 2) Functional safety requireme
...

Questions, Comments and Discussion

Ask us and Technical Secretary will try to provide an answer. You can facilitate discussion about the standard in here.